undercarriage skid plate
#1
Advanced
Thread Starter
undercarriage skid plate
Hey guys, so I cracked my oil pan again... I'm getting it replaced right now, but I now see that it's vital to protect our oil pans when being lowered. I was wondering if anyone has ever fabricated a custom skid plate for their undercarriage? The guy at the shop quoted me $200 for the job since it is custom work. If you did make one, how much did you pay?
The following users liked this post:
dc2kid (02-17-2012)
#4
10th Gear
Join Date: Sep 2011
Location: Wilmington, NC
Age: 48
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
I would definitely lower mine more if there was some type of skidplate. Every time is see debris in the road I think "is this the end of my oil pan/engine?" I am interested!
#5
Advanced
Thread Starter
Wouldn't that push the hood up?
sick, keep me posted!
Yeah, I think the best bet is for a custom made one.. I'll let you guys know if it goes through.
Yeah, I think the best bet is for a custom made one.. I'll let you guys know if it goes through.
#7
Advanced
Thread Starter
Trending Topics
#10
Advanced
Thread Starter
I recently had the engine replaced, so hopefully the mechanic threw in new motor mounts. As for the skid plate, I'll probably try to get one custom just to be on the safe side.
#12
Racer
Sort of off topic:
How much did it cost you to replace that oil pan? I'm yet to confirm it, but I'm fairly sure either the bolt threads are stripped, or the gasket is leaking because the oil spot on my driveway is getting larger and larger.
I know I could go with an oversize drain bolt if its the threads, but I'd rather just get the pan replaced and be done with it.
How much did it cost you to replace that oil pan? I'm yet to confirm it, but I'm fairly sure either the bolt threads are stripped, or the gasket is leaking because the oil spot on my driveway is getting larger and larger.
I know I could go with an oversize drain bolt if its the threads, but I'd rather just get the pan replaced and be done with it.
#14
Yeah, as 'ol Mil said.....some common sense logic and ingenuity will work without actual engineering prints.
Thread
Thread Starter
Forum
Replies
Last Post
rp_guy
Member Cars for Sale
9
07-16-2017 07:33 AM
rcs86
Car Parts for Sale
3
08-02-2016 06:52 PM
detailersdomain
Wash & Wax
3
10-09-2015 10:13 PM