so what have you done to your acura cl today?
#4
DFW AREA,
Thread Starter
Join Date: Sep 2009
Location: texas
Age: 31
Posts: 304
Likes: 0
Received 0 Likes
on
0 Posts
yes those are from the accord coupe, i did those last year, you have to trim some sides off,
its pretty easy diy
i used garage door sealant for the lip, im going to fix it tomorrow, it needs to flare out a little more
its pretty easy diy
i used garage door sealant for the lip, im going to fix it tomorrow, it needs to flare out a little more
Trending Topics
#8
DFW AREA,
Thread Starter
Join Date: Sep 2009
Location: texas
Age: 31
Posts: 304
Likes: 0
Received 0 Likes
on
0 Posts
also last night there was a bmw and a civic si racing, and i was going down the street and i just saw them and the si rear ended me :| nothing bad but i was going about 50 and she was going 65ish or higher and hit me on my butt, now there are stress marks from her licenses plate frame.. gay ehh?
Last edited by duyx817; 01-11-2011 at 01:39 PM.
#10
DFW AREA,
Thread Starter
Join Date: Sep 2009
Location: texas
Age: 31
Posts: 304
Likes: 0
Received 0 Likes
on
0 Posts
#14
DFW AREA,
Thread Starter
Join Date: Sep 2009
Location: texas
Age: 31
Posts: 304
Likes: 0
Received 0 Likes
on
0 Posts
#16
Three Wheelin'
Did the 3 X 3 Redline Synthetic Racing Transmission type F drain the other day, which by my calculations leaves the tranny with 70% Redline and 30% Honda oem stuff. I gotta say that it really seems to pull better and it does shift more solidly. On the 3G side there has been a long discussion about the benefits of the Redline fluid and how it will stop clutch face wear. I hope it isn't in my head but Redline does claim better torque converter lock up and better e.t.'s, let me tell you I feel it. This type F fluid has no slipperiness additives added and that is what eliminates the clutch wear they say.
#21
DFW AREA,
Thread Starter
Join Date: Sep 2009
Location: texas
Age: 31
Posts: 304
Likes: 0
Received 0 Likes
on
0 Posts
#26
3.7L Nitrous Breathing CL
iTrader: (7)
Went around and made sure all suspension and coilovers were tight.
Pulled out my nitrous stuff and installed ngk heat range 5 plugs.
2 steps hotter than the nitrous plugs and their is a diffrence to how much easyier the car starts and seams to pull a little better too.
Also recieved my cams and a new set of rear camber arms today.
Great day today.
The cams actual lifts look the same compared to the type s cams but the base circle is alot smaller.
Might have to modify the rockers some how to compensate.
Need to talk to a engine builder that would really know.
Pulled out my nitrous stuff and installed ngk heat range 5 plugs.
2 steps hotter than the nitrous plugs and their is a diffrence to how much easyier the car starts and seams to pull a little better too.
Also recieved my cams and a new set of rear camber arms today.
Great day today.
The cams actual lifts look the same compared to the type s cams but the base circle is alot smaller.
Might have to modify the rockers some how to compensate.
Need to talk to a engine builder that would really know.
Thread
Thread Starter
Forum
Replies
Last Post
AndrewS
Audio, Video, Electronics & Navigation
19
03-14-2024 06:59 PM
Soul_Deamon
4G TL Problems & Fixes
8
11-02-2015 04:32 PM