EricL

It seems that Keyes Acura tossed all of my instruction manuals, EO-sticker (CARB #) for my intake, and I was told that there is a strip that one can use to measure the cut width for the bypass. I am ok for now, but they ripped off my docs. I just now check my document bag, and the "official" instruction manuals from my:
Comptech headers
Comptech sways
&
AEM CAI intake are all gone

Can some one let me know if they have an EO-sticker on their intake?

Argh!

------------------
Silver 2001 CL-S with NAVI

• Mud guards
• Wheel locks
• Toyo T1S 235/45ZR17-97W* Proxies on 17x8" SSR Competition wheels (48lbs less than stock)
• Kevlar/SS Brake lines w/Brembos?
• Comptech headers & sways
• Silver AEM CAI
• 9 coats of Zaino magic

so cal type s_RENAMED

the intake is already carb certified? aka silver sticker?

------------------
'01 cl-s blk/blk :: comptech headers, comptech springs, comptech sway bars

EricL

They didn't put on the silver sticker. They only put on a sticker saying something about using the stock intake when the intake is in over 18" of water. The morons didn't put that sticker on!

It is a separate sticker -- yes/no?

I went out and looked at the top and bottom of the AEM pipe and no EO- sticker -- help


------------------
Silver 2001 CL-S with NAVI

• Mud guards
• Wheel locks
• Toyo T1S 235/45ZR17-97W* Proxies on 17x8" SSR Competition wheels (48lbs less than stock)
• Kevlar/SS Brake lines w/Brembos?
• Comptech headers & sways
• Silver AEM CAI
• 9 coats of Zaino magic

[This message has been edited by EricL (edited 04-27-2001).]

Kevin M

EricL,
I just installed my AEM CAI last weekend, and the C.A.R.B. sticker was on the pipe already. Theere was nothing for me to stick on. The AEM sticker was also on and covered by a white peel off sheet to protect it during install.
Kevin
P.S. I am sure AEM could send you another sticker.

blxmjx

Eric, just hit them up on this email and tell them your problem. They'll take care of you.

tech@aempower.com

------------------
2001 CL Type S
Eibach Sportlines/18" SSR GPO Evolutions on Pirelli p7000's/HKS Super Drager Exhaust/AEM CAI/AEM underdrive pulleys/Goodridge Stainless Steel Carbo lined brake lines

1995 Integra GSR
17" SSR GPO's on Nitto Extremes/DC Sports Stainless Steel Header/AEM CAI/MB quart mids and highs/Neuspeed strut braces/Tokico Adjustables/Apexi Cat back exhaust

1991 Mazda Miata Special Edition
Custom BMW Arctic Blue Paint/Hard Dog Sport Roll Bar/Custom Leather Seats/MB Quarts all the way around/Tokico Illuminas/Suspension Technique-Speed Tech Springs/Work-Ewing III's on Dunlop D40m2's/Flying Miata Sway bars/Greddy Turbo Kit/Greddy PE catback exhaust/

I'll finish the rest later

[This message has been edited by blxmjx (edited 04-27-2001).]

EricL

I sent them an e-mail. The phone number for them is disconnected (talk about great service)....

I turns out that Tim @ www.autocarparts.com didn't tell me that the EO sticker was not included in my box.

Tim also said that the measuring "guide" for the bypass valve is only included with the Bypass valve, not the AEM unit.

Anyone care to confirm or deny?



------------------
Silver 2001 CL-S with NAVI

• Mud guards
• Wheel locks
• Toyo T1S 235/45ZR17-97W* Proxies on 17x8" SSR Competition wheels (48lbs less than stock)
• Kevlar/SS Brake lines w/Brembos?
• Comptech headers & sways
• Silver AEM CAI
• 9 coats of Zaino magic

H@mmerm@n

I got mine installed at a local dealer Sacramento (Niello Acura/Porsche) on Monday and they sticker was placed on the intake.

------------------
Mike
2001 Satin Silver CL-S
Comptech headers, exhaust, sways
AEM CAI (Red)
PIAA 19169 road lamps
Member of NO SCRATCHED RIMS club!

"Never underestimate the power of a dark CLown!" - Darph Bobo

Ashburner

Hey Mike,

How do you like it? How much did Niello charge for the install?

Thanks,

-Ash

H@mmerm@n

Ash...you've got mail.

------------------
Mike
2001 Satin Silver CL-S
Comptech headers, exhaust, sways, AEM CAI (Red), PIAA 19169 road lamps, NO SCRATCHED RIMS!

"Never underestimate the power of a dark CLown!" - Darph Bobo