xtcnrice's bwp cu2

Thread Tools
 
Search this Thread
 
Old 06-15-2014, 05:29 PM
  #1  
VTEC just kicked in, yo!
Thread Starter
 
xtcnrice's Avatar
 
Join Date: Jan 2014
Location: Toronto, ON
Age: 33
Posts: 4,361
Received 1,112 Likes on 876 Posts
xtcnrice's bwp cu2

Hey all, in last December 2013 I decided to get myself a Bellanova White Pearl with the Tech package. It's now June and I finally decided to start a build thread!

Current mods:
  • TEIN Street Basis
  • 18x9.5 +45 VMR V710 on 235/40/18 Hankook Ventus V12
  • LED license plate lights

I had a few complications along the way... the shop that did the redrilling screwed up the rebore on one of my wheels... so I had to use 3x 66.6 ->
64.1mm rings and one 74.1 -> 64.1mm ring. Had to buy 2 damn sets of hub rings . Anyway... I won't name any names, definitely was frustrating to say the least, having my wheels and tires in storage while I wait for damn rings to arrive. But in the mean time, I ordered my TEIN Street Basis .

I (tried to) installed the TEIN Street Basis myself, with the help of my awesome girlfriend hahah. It was taking way too long though, so my dad and eventually even my brother started helping me out. I actually needed all the help I could get with the rears... the stock shocks were so difficult to take out... but we eventually did it. The whole process took like 7 hours in total LOL.


Future mods:
  • 30% FormulaOne Pinnacle tint all around
  • Plastidip fog covers
  • Smoke vinyl the chrome trim and rear chrome bar
  • Spacers for the rears (dunno what size!)
  • OEM RL BBK??! (dunno what colour would look nice when refinished though)

I'm a total noob, so I don't have many photos that show progress of my car. So, I'll just start with photos of her as she is right now.

Front (not a very good picture )
xtcnrice's bwp cu2-dz7qx9v.jpg

Rear
xtcnrice's bwp cu2-n4pess1.jpg

Fender pics for VR1

Front driver side
xtcnrice's bwp cu2-pznzzp4.jpg

Rear driver side (beadssss)
xtcnrice's bwp cu2-tnlkxhd.jpg

I know I need spacers for my rears... but I don't wanna roll my fenders either . Yeah I'm soft.... shh. Any recommendations for spacer size?

Special thanks to MC MiYoung for the China license plate LEDs , chris_cu2 for showcasing these wheels on his BWP with these specs, saucy for his awesome TEIN SS DIY which I used for installing my TEIN Street Basis, and to robpp for suspension torque specs

I'd also like to thank all the 2G guys on this forum for inspiring me on what to do (and what not to do hahah) with my ride. I was a little skeptical of my new ride at first... but this forum has really gotten me to love the look and feel of my ride.

Feel free to comment/criticize/etc. Thanks for looking! And sorry for so few pics check out my IG for a couple more haha

Last edited by xtcnrice; 06-15-2014 at 05:43 PM.
The following 3 users liked this post by xtcnrice:
MC MiYoung3269 (06-15-2014), rawger (06-15-2014), VR1 (09-15-2014)
Old 06-15-2014, 06:10 PM
  #2  
VR1
Itz JDM y0!
 
VR1's Avatar
 
Join Date: Feb 2013
Location: Houston, TX
Age: 26
Posts: 2,136
Received 443 Likes on 290 Posts
The following users liked this post:
xtcnrice (06-15-2014)
Old 06-15-2014, 08:50 PM
  #3  
Three Wheelin'
 
rawger's Avatar
 
Join Date: Mar 2014
Location: Orlando, FL
Posts: 1,955
Received 602 Likes on 369 Posts
Damn dude, those rims are siiiiick. Really, I like them a lot.

Definitely get the tint, it's going to look great as soon as you do. I'm a noob too with mods, bigger than you, so I'll be keeping tabs on this for easy mods I might be able to do hahaha.
The following users liked this post:
xtcnrice (06-15-2014)
Old 06-15-2014, 09:47 PM
  #4  
Drifting
 
MC MiYoung3269's Avatar
 
Join Date: Jun 2010
Location: ㅎouston, ㅌexas
Age: 28
Posts: 3,385
Received 1,000 Likes on 712 Posts
Good shit, I should throw on my friends wheels so we can be twins!
The following users liked this post:
xtcnrice (06-15-2014)
Old 06-15-2014, 11:08 PM
  #5  
TSX AMG Type //M i-VVT
 
iCrap's Avatar
 
Join Date: Jun 2013
Posts: 4,578
Received 856 Likes on 643 Posts
looks sick. i really need to get coils on mine..
The following users liked this post:
xtcnrice (06-15-2014)
Old 06-16-2014, 12:06 AM
  #6  
Instructor
 
SiiRBrooklyn's Avatar
 
Join Date: Mar 2014
Location: Miami
Age: 30
Posts: 138
Received 21 Likes on 17 Posts
Nice! And im a noob myself so were on the same boat their lol. Learning as i go. Def get those tints on tho.
The following users liked this post:
xtcnrice (06-16-2014)
Old 06-16-2014, 12:07 AM
  #7  
Three Wheelin'
 
rawger's Avatar
 
Join Date: Mar 2014
Location: Orlando, FL
Posts: 1,955
Received 602 Likes on 369 Posts
xtc, how much did those rims run you? I could look around, but I'm just being lazy, sorry. Lol.
Old 06-16-2014, 12:24 AM
  #8  
VTEC just kicked in, yo!
Thread Starter
 
xtcnrice's Avatar
 
Join Date: Jan 2014
Location: Toronto, ON
Age: 33
Posts: 4,361
Received 1,112 Likes on 876 Posts
Originally Posted by rawger
xtc, how much did those rims run you? I could look around, but I'm just being lazy, sorry. Lol.
1k including redrill/shipping from wheelflip
Old 06-16-2014, 12:25 AM
  #9  
VTEC just kicked in, yo!
Thread Starter
 
xtcnrice's Avatar
 
Join Date: Jan 2014
Location: Toronto, ON
Age: 33
Posts: 4,361
Received 1,112 Likes on 876 Posts
Originally Posted by SiiRBrooklyn
Nice! And im a noob myself so were on the same boat their lol. Learning as i go. Def get those tints on tho.
tints going on in 3 weeks! long wait list for this shop
Old 06-16-2014, 05:34 AM
  #10  
Racer
 
Cu2Suspect's Avatar
 
Join Date: Aug 2013
Location: New York
Age: 33
Posts: 305
Received 47 Likes on 37 Posts
Looking good! Like the wheels
The following users liked this post:
xtcnrice (06-16-2014)
Old 06-16-2014, 08:57 AM
  #11  
Everyday I'm rofling
 
opboarding's Avatar
 
Join Date: Jul 2011
Location: Dallas, TX
Age: 36
Posts: 4,755
Received 1,788 Likes on 1,103 Posts
About time you make a thread. I was starting to doubt you even had a tsx.

Looks like you are on the right track with your mods. Keep up the good work!
The following users liked this post:
xtcnrice (06-16-2014)
Old 06-16-2014, 09:52 AM
  #12  
VTEC just kicked in, yo!
Thread Starter
 
xtcnrice's Avatar
 
Join Date: Jan 2014
Location: Toronto, ON
Age: 33
Posts: 4,361
Received 1,112 Likes on 876 Posts
Originally Posted by opboarding
About time you make a thread. I was starting to doubt you even had a tsx.

Looks like you are on the right track with your mods. Keep up the good work!
Lol, I felt the exact same way. Thought to myself... these OGs probably doubt I even own a 2G.

Thanks for the compliment!
Old 06-17-2014, 09:34 PM
  #13  
Three Wheelin'
 
rawger's Avatar
 
Join Date: Mar 2014
Location: Orlando, FL
Posts: 1,955
Received 602 Likes on 369 Posts
Originally Posted by xtcnrice
1k including redrill/shipping from wheelflip
They're clean. I didn't even know you bought aftermarket rims. I could have sworn you were all stocked out haha.
Old 06-18-2014, 12:01 AM
  #14  
VTEC just kicked in, yo!
Thread Starter
 
xtcnrice's Avatar
 
Join Date: Jan 2014
Location: Toronto, ON
Age: 33
Posts: 4,361
Received 1,112 Likes on 876 Posts
Originally Posted by rawger
They're clean. I didn't even know you bought aftermarket rims. I could have sworn you were all stocked out haha.
I was trying to stay a tad low profile. Like op said, people probably didn't even think I had a TSX hahah
Old 06-18-2014, 07:52 AM
  #15  
Racer
 
Slade037's Avatar
 
Join Date: Jul 2010
Location: Fairfax, Va
Posts: 340
Received 71 Likes on 49 Posts
Looks great. Would love to see more pics.

How's the mpg going from 7.5 to 9.5 wide?
The following users liked this post:
xtcnrice (06-18-2014)
Old 06-18-2014, 09:14 AM
  #16  
VTEC just kicked in, yo!
Thread Starter
 
xtcnrice's Avatar
 
Join Date: Jan 2014
Location: Toronto, ON
Age: 33
Posts: 4,361
Received 1,112 Likes on 876 Posts
Originally Posted by Slade037
Looks great. Would love to see more pics.

How's the mpg going from 7.5 to 9.5 wide?
Thanks! Hoping to get some more pics up after I get my tint done.

Honestly, I haven't noticed the mpg effect (yet). It might be because my car's fuel economy readings haven't stabilized yet because it's always improving. She only has a little north of 5100km, and I've switched from mostly city driving to about 50/50 now. When I first got the wheels on, which was exactly 1 month ago, I was at about 10.9L/100km (~21.6 mpg). Now it's reading 10.7L/100km (22 mpg). I also got an alignment done about a week ago.

I read that the mpg is affected by increased friction due to more contact area between the tires and the road. The stockies were on 225/50/17s right? I'm running a semi-stretched setup of 235/40/18, so the contact hasn't really increased by much, if any. If I had to guess, the mpg probably has gotten a tad worse from the combined increased weight of the wheels and tires. For my next set of wheels I'll definitely be going forged/lightweight.

Last edited by xtcnrice; 06-18-2014 at 09:27 AM.
The following users liked this post:
Slade037 (06-18-2014)
Old 06-18-2014, 09:34 AM
  #17  
Three Wheelin'
 
terdonal's Avatar
 
Join Date: Mar 2003
Location: Mapleridge, BC
Age: 77
Posts: 1,766
Received 248 Likes on 229 Posts
Very nice.
The following users liked this post:
xtcnrice (06-18-2014)
Old 06-18-2014, 08:15 PM
  #18  
Three Wheelin'
 
rawger's Avatar
 
Join Date: Mar 2014
Location: Orlando, FL
Posts: 1,955
Received 602 Likes on 369 Posts
Originally Posted by xtcnrice
I was trying to stay a tad low profile. Like op said, people probably didn't even think I had a TSX hahah
I guess this is me now.
Old 06-19-2014, 02:21 PM
  #19  
Advanced
 
tommybabu1437's Avatar
 
Join Date: Aug 2010
Location: Virginia
Posts: 65
Likes: 0
Received 8 Likes on 8 Posts
nice ride!!! any side shots?
The following users liked this post:
xtcnrice (06-19-2014)
Old 06-19-2014, 09:43 PM
  #20  
Instructor
 
Vinny_P's Avatar
 
Join Date: Apr 2010
Location: Toronto, Canada
Age: 37
Posts: 160
Received 32 Likes on 28 Posts
Nice setup...I like the look of 18's...more practical for daily driving.

Hope to meet up if we can get another meet setup...where has wassobe dissapeared to?

Definitely post up more pics when you get a chance.
The following users liked this post:
xtcnrice (06-19-2014)
Old 06-19-2014, 09:58 PM
  #21  
VTEC just kicked in, yo!
Thread Starter
 
xtcnrice's Avatar
 
Join Date: Jan 2014
Location: Toronto, ON
Age: 33
Posts: 4,361
Received 1,112 Likes on 876 Posts
Thanks guys, appreciate the kind words.

Originally Posted by tommybabu1437
nice ride!!! any side shots?
This will have to wait . Going to NY state this weekend, Montreal the next, and getting tint installed the weekend after. Hopefully I'll have some time to give her a nice wash after my tint settle in.

Originally Posted by Vinny_P
Nice setup...I like the look of 18's...more practical for daily driving.

Hope to meet up if we can get another meet setup...where has wassobe dissapeared to?

Definitely post up more pics when you get a chance.
Yeah I agree on the 18s as well . Maybe he's doing something big to his car and wants to stay low profile for a bit
Old 06-26-2014, 08:22 PM
  #22  
mugen cu2
 
savclaude's Avatar
 
Join Date: Mar 2012
Location: coral springs fl
Age: 42
Posts: 784
Received 201 Likes on 142 Posts
clean ride
The following users liked this post:
xtcnrice (06-27-2014)
Old 06-27-2014, 12:04 AM
  #23  
VTEC just kicked in, yo!
Thread Starter
 
xtcnrice's Avatar
 
Join Date: Jan 2014
Location: Toronto, ON
Age: 33
Posts: 4,361
Received 1,112 Likes on 876 Posts
Originally Posted by savclaude
clean ride
thanks sav, means a lot coming from you hahah
Old 06-27-2014, 12:16 AM
  #24  
Intermediate
 
914TSX's Avatar
 
Join Date: May 2014
Location: Westchester NY
Posts: 47
Received 7 Likes on 7 Posts
Nice wheels
The following users liked this post:
xtcnrice (06-27-2014)
Old 07-01-2014, 08:44 AM
  #25  
Racer
 
waaasobe's Avatar
 
Join Date: Mar 2013
Location: toronto (gta)
Posts: 401
Received 75 Likes on 72 Posts
car looks great man, now that you're not stock you can finally come out to some of these meets!

Last edited by waaasobe; 07-01-2014 at 08:54 AM.
The following users liked this post:
xtcnrice (07-01-2014)
Old 07-01-2014, 11:27 PM
  #26  
VTEC just kicked in, yo!
Thread Starter
 
xtcnrice's Avatar
 
Join Date: Jan 2014
Location: Toronto, ON
Age: 33
Posts: 4,361
Received 1,112 Likes on 876 Posts
Originally Posted by waaasobe
car looks great man, now that you're not stock you can finally come out to some of these meets!
haha thanks man, hope to reach out sometime soon
Old 07-26-2014, 04:31 PM
  #27  
VTEC just kicked in, yo!
Thread Starter
 
xtcnrice's Avatar
 
Join Date: Jan 2014
Location: Toronto, ON
Age: 33
Posts: 4,361
Received 1,112 Likes on 876 Posts
xtcnrice's bwp cu2-aaf7aua.jpg
Old 07-26-2014, 04:56 PM
  #28  
Instructor
 
xakeo's Avatar
 
Join Date: Oct 2004
Location: Miami
Posts: 149
Received 24 Likes on 23 Posts
Originally Posted by xtcnrice
Should have order two of those man!....
Old 07-26-2014, 08:11 PM
  #29  
mugen cu2
 
savclaude's Avatar
 
Join Date: Mar 2012
Location: coral springs fl
Age: 42
Posts: 784
Received 201 Likes on 142 Posts
Old 07-27-2014, 12:21 AM
  #30  
Three Wheelin'
 
rawger's Avatar
 
Join Date: Mar 2014
Location: Orlando, FL
Posts: 1,955
Received 602 Likes on 369 Posts
Cool box bro.
Old 07-27-2014, 09:32 AM
  #31  
ROTAREDOM
 
ssjoeboe9's Avatar
 
Join Date: Dec 2010
Location: Dublin, OH
Age: 33
Posts: 5,675
Received 1,488 Likes on 1,058 Posts
I just looked at retail price for that piece, $475... damn.
Old 07-27-2014, 09:55 AM
  #32  
TSX AMG Type //M i-VVT
 
iCrap's Avatar
 
Join Date: Jun 2013
Posts: 4,578
Received 856 Likes on 643 Posts
that's just the MSRP you can get it way cheaper from other places.
Old 07-27-2014, 10:19 AM
  #33  
VTEC just kicked in, yo!
Thread Starter
 
xtcnrice's Avatar
 
Join Date: Jan 2014
Location: Toronto, ON
Age: 33
Posts: 4,361
Received 1,112 Likes on 876 Posts
Originally Posted by ssjoeboe9
I just looked at retail price for that piece, $475... damn.
Originally Posted by iCrap
that's just the MSRP you can get it way cheaper from other places.
got it for $100 taxes in on ebay! was on a demo car and the guy even included all the hardware I needed to install it.
The following users liked this post:
MC MiYoung3269 (07-27-2014)
Old 07-27-2014, 10:19 AM
  #34  
VTEC just kicked in, yo!
Thread Starter
 
xtcnrice's Avatar
 
Join Date: Jan 2014
Location: Toronto, ON
Age: 33
Posts: 4,361
Received 1,112 Likes on 876 Posts
xtcnrice's bwp cu2-vw6lbjk.jpg
Old 07-27-2014, 10:29 AM
  #35  
Drifting
 
MC MiYoung3269's Avatar
 
Join Date: Jun 2010
Location: ㅎouston, ㅌexas
Age: 28
Posts: 3,385
Received 1,000 Likes on 712 Posts
I still hate you for getting them so cheap.....
The following 2 users liked this post by MC MiYoung3269:
i_MOB (07-27-2014), xtcnrice (07-27-2014)
Old 07-27-2014, 06:28 PM
  #36  
Clever caption here
 
i_MOB's Avatar
 
Join Date: Mar 2013
Location: Everywhere, Houston
Posts: 50
Received 19 Likes on 16 Posts
Looks good
The following users liked this post:
xtcnrice (07-27-2014)
Old 07-28-2014, 09:06 PM
  #37  
Three Wheelin'
 
rawger's Avatar
 
Join Date: Mar 2014
Location: Orlando, FL
Posts: 1,955
Received 602 Likes on 369 Posts
Girl you be killin' em!

PS: Looks like you have stacks of cocaine in the back. On the shelf.
The following users liked this post:
xtcnrice (07-29-2014)
Old 07-28-2014, 11:29 PM
  #38  
Pro
 
urbanstereo's Avatar
 
Join Date: Dec 2013
Posts: 685
Received 192 Likes on 129 Posts
oh front underbody spoiler?
mine came with the car
Old 07-28-2014, 11:29 PM
  #39  
Pro
 
urbanstereo's Avatar
 
Join Date: Dec 2013
Posts: 685
Received 192 Likes on 129 Posts
=)
Old 07-28-2014, 11:29 PM
  #40  
Pro
 
urbanstereo's Avatar
 
Join Date: Dec 2013
Posts: 685
Received 192 Likes on 129 Posts
also no



no care


Quick Reply: xtcnrice's bwp cu2



All times are GMT -5. The time now is 08:50 AM.