where did you get that sideskirts?

I did what you said and wired it up. Now it works perfect and looks great . After finishing it I realize it was common sense to wire it .

As for the fire wall hole, non of my plugs were able to fit. So I had to leave the relay and fuse somewhere by the firewall.

Quick questions. Are you running 3k with yellow lenses?

Thanks for all the help and time sorry for bothering you

With this fog harness. The wires that I have are
red wire (for the battery but were not hooking that to the battery but the fuse.box under the dash)
Black wire (which is a ground wire )
yellow wire ( for the fog switch which were not using)
and two plugs for the fog lights


So are you saying hook the round wire to the battery since that's my black wire?

okay i have a couple of questions for you.

So with your fog set up your not using a switch at all right?
with your set up, when you turn on the parking lights the fog will come on at the same time right?

as for the red wire that is connected to the black box with a fuse, do i connect that red wire to the battery or do i connect that to the fuse box under the steering column with some type of connector?

for the yellow wire that wire is supposed to be connected to the harness with the fog switch. since i dont want to use the fog switch, what do i do what that wire?

image of what i am talking about
http://i61.photobucket.com/albums/h5...ps9afdfeeb.jpg"

Thank alot for the help i really appreciated.

I have a question, i see that you have installed the civic fogs and what my question is how did you have the wiring setup? like for instance when you armed the car would the fog shut off along with the low beam?? or do you have to press the fog swtich?

also did you follow along with the civic fog DIY witht he wiring? or did you add your own wiring to it?

Thank you

those are nice headlights.... where did you get them from.??? I been looking all over the web and just had no luck

First of all I would recommend 680 ohm 1/4 watt resistors instead. What exactly are you using these for your headlight mod?
You could use 6 resistors (one per led) at the ohm rated I stated above or you could put one resistor in series with the 3 leds each at about 300 ohm 1/4 watt.