2015 ILX 2.4L Build
The following users liked this post:
visi_d (03-01-2022)
#42
whered you purchase the side aero trim and the front splitter? Looking to find these for my ilx
The following 2 users liked this post by visi_d:
lsimpson50 (03-07-2022),
mangomoi (03-07-2022)
The following users liked this post:
mangomoi (03-07-2022)
#45
Racer
Thread Starter
Ridgid collars for the subframe
heard these make a huge difference in how the car feels and handles. Supposed to take up the float between the subframe bolt and the opening for it. Engineering designs the opening for the bolt to go through bigger for easy of assembly as it goes down the line during production.
The following users liked this post:
godfather2 (04-07-2022)
The following 3 users liked this post by visi_d:
The following users liked this post:
lsimpson50 (05-17-2022)
#48
Racer
Thread Starter
New stuff and new stuff learned
Powder coated the aluminum portion of the intake manifold
Refinished the fluel rail
Since i installed the ktuned intake manifold thermal gasket, you must relocate the ground wires that originally connect to the intake manifold to the valve cover. The gasket acts like a insulator between the cylinder head and intake manifold preventing the ground cables from working properly.
Polished the inside of the runner for better airflow.
The following users liked this post:
godfather2 (06-19-2022)
#54
Racer
Thread Starter
Track prep day
Ebc rotors with carbotech brake pads. Stop tech brake lines with motul brake fluid
OEM battery=28lbs New lithium ion battery=5.7lbs
Perfect fit
-23lbs out of the front end
The following users liked this post:
godfather2 (07-07-2022)
#56
Nice build, I do have one question. Why would you keep that sunroof with all that weight at the highest point of the car?
#57
Racer
Thread Starter
Cost factor
You are right about the weight. I just don't see it as a priority right now for cost reasons to delete a sunroof. The cost per weight savings is not there for me right now.
#58
When I bought my '16 I actually asked if I could get one without the hole in the roof.
#59
Racer
Thread Starter
I have a friend with a rsx type s who got a type r roof and had a body shop swap it over. Saved the weight that way. Us with the ilx don't have the option for no sunroof. I was looking to do this professionally at a shop. Body work is not my specialty and don't wanna hack the job. I got my winter list of projects already with new clutchand flywheel,LSD, Ridgid collars
#60
I have a friend with a rsx type s who got a type r roof and had a body shop swap it over. Saved the weight that way. Us with the ilx don't have the option for no sunroof. I was looking to do this professionally at a shop. Body work is not my specialty and don't wanna hack the job. I got my winter list of projects already with new clutchand flywheel,LSD, Ridgid collars
The following 2 users liked this post by visi_d:
DaIll1 (07-13-2022),
godfather2 (07-13-2022)
The following 3 users liked this post by visi_d:
The following users liked this post:
visi_d (07-20-2022)
#64
Racer
Thread Starter
For more content please check out my Instagram as well visi_d
https://www.simariphotography.com/
https://www.simariphotography.com/
https://www.simariphotography.com/
https://www.simariphotography.com/
https://www.simariphotography.com/
https://www.simariphotography.com/
https://www.simariphotography.com/
https://www.simariphotography.com/
https://www.simariphotography.com/
https://www.simariphotography.com/
https://www.simariphotography.com/
https://www.simariphotography.com/
The following 2 users liked this post by visi_d:
DaIll1 (07-28-2022),
godfather2 (07-30-2022)
#65
Racer
Thread Starter
New passenger seat
So i paired up a falcon r series driver's seat with a venom r series passenger seat. I went with a different seat for the passenger side that's not as aggressive and can accommodate variety of body types. Also much easier to get in and out off. So since the seat is heavier than my driver's seat i made it a fixed position. Kept the sliders out to keep weight down. Over all the OEM seat was 50 lbs and the new seat with all the bracket and hardware came to 38 lbs.
The following 3 users liked this post by visi_d:
#66
Time to Climb
So i paired up a falcon r series driver's seat with a venom r series passenger seat. I went with a different seat for the passenger side that's not as aggressive and can accommodate variety of body types. Also much easier to get in and out off. So since the seat is heavier than my driver's seat i made it a fixed position. Kept the sliders out to keep weight down. Over all the OEM seat was 50 lbs and the new seat with all the bracket and hardware came to 38 lbs.
The following users liked this post:
FLIX_21 (03-24-2023)
#70
Racer
Thread Starter
Rear end time
One and only rear diffuser for the ILX. These are built to order from this company in Ontario Canada. Company is called sinful visions. As far as fitment, only one other ilx member has this installed and he also drives a first Gen. I'm not sure how the fitment will be on 2016+ rear end. Hope you guys like it. It's made out of a composite material. Whole piece is just under 9 lbs. Very sturdy and strong.
The following users liked this post:
godfather2 (05-26-2023)
The following 2 users liked this post by visi_d:
godfather2 (06-01-2023),
lsimpson50 (06-09-2023)
The following 2 users liked this post by visi_d:
DaIll1 (06-17-2023),
lsimpson50 (06-14-2023)
The following 2 users liked this post by visi_d:
godfather2 (06-29-2023),
lsimpson50 (06-29-2023)
#76
I have a friend with a rsx type s who got a type r roof and had a body shop swap it over. Saved the weight that way. Us with the ilx don't have the option for no sunroof. I was looking to do this professionally at a shop. Body work is not my specialty and don't wanna hack the job. I got my winter list of projects already with new clutchand flywheel,LSD, Ridgid collars
The following 2 users liked this post by visi_d:
Billy Sastard (11-25-2023),
godfather2 (11-19-2023)
The following users liked this post:
godfather2 (11-19-2023)