Suspension noise?
10-10-2018, 12:05 PM
#4
Drifting
iTrader: (1)
Join Date: Nov 2010
Location: Salt Lake City, UT
Age: 42
Posts: 3,490
Received 849 Likes
on
605 Posts
It worked for me.
If the boot is not torn and you don't have play or noise when moving the hub right and left (other than the normal rotational movement between the ball joint and steering knuckle), then I'd probably leave it alone.
I replaced my outer tie rods a few months ago. The new ones were definitely "tigheter" than that but I think the most important thing is that they don't have play on the horizontal plane. Rocking back and forth like that is probably less critical. I'm not a suspension expert however. If you're up for changing them, they're relatively cheap on RockAuto.
If the boot is not torn and you don't have play or noise when moving the hub right and left (other than the normal rotational movement between the ball joint and steering knuckle), then I'd probably leave it alone.
I replaced my outer tie rods a few months ago. The new ones were definitely "tigheter" than that but I think the most important thing is that they don't have play on the horizontal plane. Rocking back and forth like that is probably less critical. I'm not a suspension expert however. If you're up for changing them, they're relatively cheap on RockAuto.
Thread
Thread Starter
Forum
Replies
Last Post
jmbnova
3G TL Tires, Wheels & Suspension
7
03-10-2006 09:32 PM
PeterUbers
3G TL (2004-2008)
10
04-20-2004 05:42 AM
city001
2G TL (1999-2003)
22
11-19-2001 02:45 AM
