Custom Carbon Fiber Parts
Hello. So i'm almost done with the 3g TL molds ( pictures below ) and going to get into the 4g TL.
We can get into a full carbon trunk with or without ducklip fenders with or without vents hood with or without vents trunk lip alone any style ( duck lip / csl ) Would there be any suggestions / requests / information you may want to tell me to help? Which one would you like to see first? https://cimg1.ibsrv.net/gimg/acurazi...40f61863de.jpg https://cimg2.ibsrv.net/gimg/acurazi...7aac44a07b.gif https://cimg0.ibsrv.net/gimg/acurazi...398cde09cb.jpg https://cimg6.ibsrv.net/gimg/acurazi...0663120f8c.jpg https://cimg3.ibsrv.net/gimg/acurazi...040fb67598.gif |
Cool out of that list im liking hood/fenders and im pro vents. What also comes to mind that I would buy is a cf diffuser for the front lip of the a-spec kit.
|
It'd say the rear lip/trunk is going to be difficult with the TL due to the camera and button but I'm sure you guys can figure it out! I'd def want a CF rear trunk lip, and I know a lot of folks look for a good looking CF diffuser for front or rear with the factory bodykit. The trunk is going to be more meh in my opinion, not many sales.
|
^, damn that camera is a buzzkill. I may have to find one with it to mold.
|
carbon fiber 09-11 rear lip garnish. the flat black part on the 09-11 rear lip right where the exhaust tips are. i would say inserts..
|
Originally Posted by potmilkz
(Post 16085018)
carbon fiber 09-11 rear lip garnish. the flat black part on the 09-11 rear lip right where the exhaust tips are. i would say inserts..
71504-TK4-A00. (Number 24 in the diagram, located to the right with the '12 - '14 parts) And hey, while you're at it, why not the garnish molding between the trunk and rear bumper. I've seen many guys DIY'ing that piece as well as the front grille in CF. Why not make a legit version? That part is #10 on the left side of the diagram ( '09 - '11) and #25 on the right side ( '12 - '14). Thanks! -greg https://cimg0.ibsrv.net/gimg/acurazi...c93df89a73.png |
Front lip and front grill to replace the chrome portion would be nice as well.
|
Ugh. Must avoid spending more money lol. Hood and trunk would be bad ass. Anything to reduce weight is a bonus for us 4Gers.
|
Originally Posted by carbonTSEX
(Post 16086161)
Ugh. Must avoid spending more money lol. Hood and trunk would be bad ass. Anything to reduce weight is a bonus for us 4Gers.
|
i want widen front carbon fiber fenders!
|
Originally Posted by carbonTSEX
(Post 16086161)
Ugh. Must avoid spending more money lol. Hood and trunk would be bad ass. Anything to reduce weight is a bonus for us 4Gers.
|
Originally Posted by atomlinks
(Post 16087642)
Not sure about the trunk but I believe our 4G's have aluminum hoods. Not sure if carbon fiber would weigh much less, maybe even a bit more. I remember reading something about how much thought went into weight savings for the 4G.
I agree that any tech people are probably not going to bite on a trunk, but for base models that might be a good idea. I'd consider shield/beak parts if they're not too expensive and actual replacement parts instead of overlays. Mine are painted, but they're also chip magnets. Let's get really ambitious and go for a carbon roof skin! :D If anyone wants an idea of what the lower "diffuser" part would look like in carbon, the PO of my car hydro-dipped it, and I think it looks decent: https://i.imgur.com/jRhoazAh.jpg https://cimg1.ibsrv.net/gimg/acurazi...b303279599.jpg |
That looks really good. I think it would look good with a few fins added like the new A-spec TLX's have:
https://cimg0.ibsrv.net/gimg/acurazi...b52909d360.jpg Can't help but notice you've got a Texas plate, hope all is well with you and your family, crazy news coming out of the Houston area lately with all the flooding. |
I'm 250 miles north of all the craziness, so high and dry. Thanks though!
|
Originally Posted by zmt
(Post 16087929)
I'd consider shield/beak parts if they're not too expensive and actual replacement parts instead of overlays. Mine are painted, but they're also chip magnets.
I'd consider something that completely swaps the silver piece below and accepts the 2012 shield(inset) and emblem. It would have to bolt on to the black 09-11 structure though. https://cimg3.ibsrv.net/gimg/acurazi...728dc75313.png |
How about a carbon fiber driveshaft?
|
Based on my experience on other platforms and working with Retrospec on one of my other cars. The following is my opinion on what people would actually spend money on.
1. Carbon fiber Lip attachment for the existing TL gurney spoiler, something like this http://d5otzd52uv6zz.cloudfront.net/...ac78c5-800.jpg 2.Cargon fiber window visors , would need to be double sided taped. 3.Carbon fiber rear trunk duckbill with camera location built in (tech guys won't lose their rear cam) 4 Carbon fiber rear diffuser 5. Carbon fiber lip splitter that would attach to both the aspec and stock bumper using the natural contours , the mold could be the same. 6. Carbon Fiber Engine bay plastics 7. Carbon fiber radio antenna cover 8. Carbon fiber grill set up for the 09-11 9.Carbon fiber rear trunk piece as stated above (silver trim piece) In my humble opinion. |
That looks really good. I think it would look good with a few fins added like the new A-spec TLX's have: https://cimg2.ibsrv.net/gimg/acurazi...f2a9c2f21b.jpg 5. Carbon fiber lip splitter that would attach to both the aspec and stock bumper using the natural contours , the mold could be the same. |
Any updates?
|
Originally Posted by dopeboy1
(Post 16183482)
Any updates?
We just finished the mold for paddle shifters in carbon fiber that fit this car. Unfortunately we have made about 6 molds for this 4g tl and they all didn't sell as expected. We are working on a rear roof spoiler next, but I don't see anything crazy like splitters or hoods in the future. |
|
Thanks for the update. Im wondering what are the 6 molds and are you still selling all of them?
I know of the front grill, door handles, steering wheel and paddle shifters. What about the lip that hangs off the trunk... is the camera/button too much of an issue? Are there any pictures of the front grill piece and/or door handles on a 4g TL? |
Originally Posted by dopeboy1
(Post 16183793)
Thanks for the update. Im wondering what are the 6 molds and are you still selling all of them?
I know of the front grill, door handles, steering wheel and paddle shifters. What about the lip that hangs off the trunk... is the camera/button too much of an issue? Are there any pictures of the front grill piece and/or door handles on a 4g TL? |
Originally Posted by atomlinks
(Post 16088375)
beak/shield parts yes! For the 2009-2011 years i think that would be what most would want. The only ones i've seen are a sport china grill and the ronjon one. I've purchased the china one and i'm not in love with it @ all, looks ok but flimsy as hell and not well made(fiberglass).
I'd consider something that completely swaps the silver piece below and accepts the 2012 shield(inset) and emblem. It would have to bolt on to the black 09-11 structure though. https://cimg3.ibsrv.net/gimg/acurazi...728dc75313.png |
Originally Posted by AckTL05
(Post 16184822)
Seat covers is another one. Door handles we sold a bunch of sets so far and not one sent us installed pictures :(
|
Originally Posted by csmeance
(Post 16190212)
With the door handles for the 4G TL, does it have holes in the front 2 handles for the keyless entry button or is it for the base model only?
|
https://www.endlessrpm.com/fiber-kre...-18-tsx-09-14/
Do the paddle shifters fit sh-awd too? It only mentions 2009-2014 fwd on the site. |
370z CF parts, please!! Especially for the 2015+ Nismo!!!! Seriously, you'd sell carbon fiber like hot cakes within the Z/G communities. They're both decent sized markets, and people LOVE carbon fiber in both of them, like crazy. |
|
Did you call and ask? Ack has a variety of options to customize your wheel. :2cents: |
Yeah its very possible you can get it without the perforated leather. But I doubt you will want it once you see the price lol.
On another note still no idea if the paddle extensions fit sh-awd, still interested but I think they will block the view of the engine temp gage on the left and the fuel gage on the right. That's a bit of a bummer. |
I think it's more or less the same price, regardless of how you option it. I'd imagine more CF will be more $$$, but other than that... |
Right I wouldn't think it would be more or less for non perforated leather just meant the price in general.
|
I'd be interested in the following:
- Carbon trunk without the wing (will use the stock painted trunk lip to give it a little more character) - Carbon mirror caps (indifferent at the moment) - Carbon hood (I'm for vents if they flowed with the body of the car along with cooling functionalities) - Carbon rear bumper garnish - Carbon window visors/ sunroof visors - Carbon trim pieces to replace the chrome OEM versions - Carbon foglight housing - Carbon to replace the interior silver/grey accents. (Saw this on my buddy's 2017 Accord and it looked really nice and subtle. It's a variation between dry and glossy. Satin possibly) I pretty much want to get rid of any silver/chrome accents and replace them with carbon fiber parts or paint matched. |
|
|
Any chance you can do a carbon fiber fuel door for the 4G TL?
|
Originally Posted by AckTL05
(Post 16251766)
Newest creation -
ROOF SPOILER- CLICK HERE FOR LINK https://cimg1.ibsrv.net/gimg/acurazi...069afdbe20.jpg |
.
|
How about a carbon fiber version of all that chrome trim that runs from the windshield to the back window?
|
All times are GMT -5. The time now is 05:03 AM. |
© 2024 MH Sub I, LLC dba Internet Brands