AcuraZine - Acura Enthusiast Community

AcuraZine - Acura Enthusiast Community (https://acurazine.com/forums/)
-   4G TL (2009-2014) (https://acurazine.com/forums/4g-tl-2009-2014-123/)
-   -   changing stock foglight bulbs to HID bulbs (https://acurazine.com/forums/4g-tl-2009-2014-123/changing-stock-foglight-bulbs-hid-bulbs-970393/)

rondo717 06-04-2018 01:11 AM

changing stock foglight bulbs to HID bulbs
 
I wanted to change my stock foglight bulbs to HID bulbs to match my HID stock headlights. Any recommendations on foglight bulbs to match the headlights? I'm looking for the perfect match in color between my headlights and fog lights.

echodigital 06-04-2018 09:57 AM

2012 or newer, I would go for Morimoto. For 2011 or older, I got a LED bulb + LED DRL (Same brand). I have run them over the winter and they are still running strong (fingers crossed).

https://acurazine.com/forums/fourth-...-953482/page2/

losiglow 06-13-2018 09:31 AM


Originally Posted by echodigital (Post 16243608)
2012 or newer, I would go for Morimoto. For 2011 or older, I got a LED bulb + LED DRL (Same brand). I have run them over the winter and they are still running strong (fingers crossed).

https://acurazine.com/forums/fourth-...-953482/page2/

2nd that. I shopped around for higher intensity bulbs but eventually went with the Morimoto's. Couldn't be happier. Very bright and good cutoff. Took a little while to adjust is all since they completely replace the stock fogs.

LostProphet 06-15-2018 10:46 AM

Please do not install HID in reflector bowls, you will be blinding oncoming traffic drivers. Keep the roads safe. As said, LED bulbs would be fine if Morimoto fog assemblies are out of budget.

Anicra 06-15-2018 12:29 PM

You can install HID however I would get some old factory fog HID projectors that came stock on ford fusions and see if you mod them to onto your car. (Per the Justnspace).
Just dont ask thoiboi his car has red foglights!
This is how off mine were after 30min install. They put on the yellow LamiX film for me since I had a cast on one hand.
https://cimg9.ibsrv.net/gimg/acurazi...2b776f6dba.jpg

Anicra 06-15-2018 12:46 PM

Ya sorry bout the size I was editing and making it smaller, when I got a call by time I got back it was too late to change. I thought I pressed the post button before I went to another room.

Anicra 06-15-2018 04:51 PM

I also forgot to note : Ya that was before I used the adjusters, not sure how the one was so much further out of adjustment


All times are GMT -5. The time now is 10:29 PM.


© 2024 MH Sub I, LLC dba Internet Brands