DanOst86

I noticed this recently after I replaced the positive and negative terminals along with the negative cable and grounding screw. The old terminals were so deteriorated, it was time. I checked the switch above the brake and all is well there, I can't figure out what else it can be. I'm fairly mechanically inclined and would like to fix the problem myself...unless I have to take into a shop for repairs. Any help is greatly appreciated, thank you!!

Carlos Mercado

Sometimes when removing and placing back terminals on a battery you can cause a fuse to burn out, check under the dash board on the driver side and there should be a location for all the fuses on the right side of the wall, also check the fuses under the hood

CCColtsicehockey

Do the rest of your steering wheel controls still work?