Air Filter for TL
#1
Pro
Thread Starter
Air Filter for TL
Does any one have an aftermarket Intake for the 2.5TL? What is the name of it? Where can I get one? How much does it cost?
Thanks for all your help!!
------------------
1996 2.5TL Includes: Thule Bike Rack w/deflector and Mongoose Zero G3 Mountain Bike, Rear Deck Spoiler, Sunroof Deflector, Factory Mudflaps, Full Front End Mask, 50% Tints all around, Clear Bumper Signals, Factory Keyless Entry, Superwhite Headlights, Electric Blue Cornering Lights and Signals, Carbon Fiber Front Emblem, Red Rear Indiglo Emblem, 99' Accord Fog Lights mounted in Lower Bumper Area, Sony 650X Head Unit, JBL Amp and JBL 8" (2) in T-Shaped Box to maximize Trunk Space, Cross Drilled/Slotted Rotors
1984 50th Anniversary 300ZX turbo: Stock/Sweet/MINT!!!
Girlfriends Car:
1999 V-6 Accord EX Includes: Rear Deck Spoiler, Sunroof Deflector, Factory Mudflaps, Front End Mask, 50% Tints all around, Clear Headlights w/black inserts, Half Clear/Half Red Tail Lights, Factory Keyless Entry, Superwhite Headlights, Super White Cornering Lights and Signals, Carbon Fiber Front Emblem, Red Rear Indiglo Emblem, Factory Fog Lights mounted in Lower Bumper Area
Girlfriends Other Car: 1991 Mazda Protoge'
Thanks for all your help!!
------------------
1996 2.5TL Includes: Thule Bike Rack w/deflector and Mongoose Zero G3 Mountain Bike, Rear Deck Spoiler, Sunroof Deflector, Factory Mudflaps, Full Front End Mask, 50% Tints all around, Clear Bumper Signals, Factory Keyless Entry, Superwhite Headlights, Electric Blue Cornering Lights and Signals, Carbon Fiber Front Emblem, Red Rear Indiglo Emblem, 99' Accord Fog Lights mounted in Lower Bumper Area, Sony 650X Head Unit, JBL Amp and JBL 8" (2) in T-Shaped Box to maximize Trunk Space, Cross Drilled/Slotted Rotors
1984 50th Anniversary 300ZX turbo: Stock/Sweet/MINT!!!
Girlfriends Car:
1999 V-6 Accord EX Includes: Rear Deck Spoiler, Sunroof Deflector, Factory Mudflaps, Front End Mask, 50% Tints all around, Clear Headlights w/black inserts, Half Clear/Half Red Tail Lights, Factory Keyless Entry, Superwhite Headlights, Super White Cornering Lights and Signals, Carbon Fiber Front Emblem, Red Rear Indiglo Emblem, Factory Fog Lights mounted in Lower Bumper Area
Girlfriends Other Car: 1991 Mazda Protoge'
#2
Three Wheelin'
Join Date: Nov 2000
Location: Bay Area
Age: 43
Posts: 1,420
Likes: 0
Received 0 Likes
on
0 Posts
i have an aftermarket K&N cone filter for my 97 2.5 TL. All i did was take out the stock air filter box and ploped on one of these suckers. i know it's not the same as CAI or short ram cause we're not changing the tubing, but heck you can still feel the difference. I've had the filter for about three years now. it cost me like 30 bucks back then, don't know how much it costs now. It's reusable so it's well worth the money. It's a good investment. Hope that helps
#3
Originally posted by unx979:
i have an aftermarket K&N cone filter for my 97 2.5 TL. All i did was take out the stock air filter box and ploped on one of these suckers. i know it's not the same as CAI or short ram cause we're not changing the tubing, but heck you can still feel the difference. I've had the filter for about three years now. it cost me like 30 bucks back then, don't know how much it costs now. It's reusable so it's well worth the money. It's a good investment. Hope that helps
i have an aftermarket K&N cone filter for my 97 2.5 TL. All i did was take out the stock air filter box and ploped on one of these suckers. i know it's not the same as CAI or short ram cause we're not changing the tubing, but heck you can still feel the difference. I've had the filter for about three years now. it cost me like 30 bucks back then, don't know how much it costs now. It's reusable so it's well worth the money. It's a good investment. Hope that helps
------------------
<A HREF="http://jz983.cjb.net" TARGET=_blank> </A>
#4
Three Wheelin'
Join Date: Nov 2000
Location: Bay Area
Age: 43
Posts: 1,420
Likes: 0
Received 0 Likes
on
0 Posts
i got it at Robocar down in LA area and that was awhile back. i'm sure you can get the filter on any on line aftermarket store cause you're just getting the filter. Make sure you have the right diameter though. They don't make the custom piping for our TL's but i'm not sure if it can be custom fabricated. the reason being the oxygen sensor on the piping. I know that short rams have that little knob on the top where the oxygen sensors go in but our car seems to be very stubborn if the sensor was taken out. I'm sure you can custom fabricate the piping, but i'm not sure how you would go about doing it. I guess the biggest thing would be to make sure that the diameter is correct and make sure you use the right type of metal so that you won't be sucking in more hot air. Just my 2 cents.
#5
Burning Brakes
Join Date: Feb 2001
Location: So Cal
Age: 45
Posts: 1,150
Likes: 0
Received 0 Likes
on
0 Posts
I had a performance shop put a SRI in for me. All it was was a short bent pipe, with a cone filter on it. Plug everything in and I was good to go. It ran me about $100 cause he used a generic pipe instead of a name brand on like AEM.
#6
Hey wait a second... unx979, you got one of those k&n drop in box filters????? Man i been looking ALL OVER for that sh*t! I been to pepboys, autozone, all that and they dont carry the stuff! they have k&n for other cars but not for our tl's/vigor. I even emailed K&N and their response was something like, "we dont make aif filters for TL's because there isn't enough demand." So should i go around and harrass auto part stores about getting the K&N filter or should i just email robocar and ask them to send me it? thanks..
------------------
Now watcha know about them TEXAS boys comin down in candied toys smokin weed and talkin noise
------------------
Now watcha know about them TEXAS boys comin down in candied toys smokin weed and talkin noise
#7
www.ahmotor.com
They have the drop in filter for the first Gen. It says its for the 3.2 so I dunno if it'll fit 2.5s. Hope that helps.
They have the drop in filter for the first Gen. It says its for the 3.2 so I dunno if it'll fit 2.5s. Hope that helps.
Trending Topics
#8
Originally posted by Wampum:
I had a performance shop put a SRI in for me. All it was was a short bent pipe, with a cone filter on it. Plug everything in and I was good to go. It ran me about $100 cause he used a generic pipe instead of a name brand on like AEM.
I had a performance shop put a SRI in for me. All it was was a short bent pipe, with a cone filter on it. Plug everything in and I was good to go. It ran me about $100 cause he used a generic pipe instead of a name brand on like AEM.
#12
Burning Brakes
Join Date: Feb 2001
Location: So Cal
Age: 45
Posts: 1,150
Likes: 0
Received 0 Likes
on
0 Posts
I looked at a Weapon R intake and also saw an AEM one on the wall. They all look exactly the same. The only difference is that AEM has "AEM" silk screened onto the pipe.
#14
Pro
Join Date: Feb 2001
Location: Denver
Posts: 707
Likes: 0
Received 0 Likes
on
0 Posts
I just purchased my short ram intake yesterday. It's a weapon R too. Got the silver tube with the black cone. Put me back $210.00, but that includes installation.
------------------
Rosewood 97 3.2 TL Premium
-PIAA Plasma Blue Headlights
-PIAA 1400X Platinum Series Fogs
-Clifford Solaris Alarm w/Remote Start
-Alpine Deck 7862
-Punch 800 Amplifier
-Obcon Custom Prefab Box w/Fosgate HX2 subs
-MB Quart Mids Front/Rear
-Infiniti Tweets
-10% Tint
-Factory Spoiler to be ordered!
------------------
Rosewood 97 3.2 TL Premium
-PIAA Plasma Blue Headlights
-PIAA 1400X Platinum Series Fogs
-Clifford Solaris Alarm w/Remote Start
-Alpine Deck 7862
-Punch 800 Amplifier
-Obcon Custom Prefab Box w/Fosgate HX2 subs
-MB Quart Mids Front/Rear
-Infiniti Tweets
-10% Tint
-Factory Spoiler to be ordered!
Thread
Thread Starter
Forum
Replies
Last Post
rcs86
Car Parts for Sale
3
08-02-2016 06:52 PM