3.2 to 2.5 Front End Conversion
11-21-2012, 11:17 PM
#1
Intermediate
Thread Starter
3.2 to 2.5 Front End Conversion
Alright, so I have an extra 2.5 complete front end laying around and noticed someone selling a 3.2 with front end damage, hood pushed up and cracked bumper and what not. How different are the front ends?
11-21-2012, 11:20 PM
#2
Senior Moderator
Join Date: May 2003
Location: Better Neighborhood, Arizona
Posts: 45,634
Received 2,328 Likes
on
1,308 Posts
The 2.5 bumper will fit, not perfectly but it'll fit.
11-21-2012, 11:35 PM
#4
Senior Moderator
Join Date: May 2003
Location: Better Neighborhood, Arizona
Posts: 45,634
Received 2,328 Likes
on
1,308 Posts
11-21-2012, 11:44 PM
#6
Senior Moderator
Join Date: May 2003
Location: Better Neighborhood, Arizona
Posts: 45,634
Received 2,328 Likes
on
1,308 Posts
so i figured if it's possible, someone on here has done it.
Trending Topics
11-22-2012, 07:39 AM
#8
Three Wheelin'
The bumper will only swap over with the 3.2 reinforcement bar in your case. The 3.2 front end is slightly wider and is built differently too so I doubt the hood will fit/lock down on the latch properly.
Last edited by main70072; 11-22-2012 at 07:42 AM.
The following users liked this post:
jpaprota (11-23-2012)
Thread
Thread Starter
Forum
Replies
Last Post
TLDude876
Car Talk
134
12-28-2016 03:18 PM
Oakes
Wash & Wax
10
10-12-2015 11:17 AM
