Been a while, bought another RL...

Thread Tools
 
Search this Thread
 
Old 08-22-2013, 08:35 AM
  #121  
2004 Carbon Gray 3.5RL
Thread Starter
 
99blackhatch's Avatar
 
Join Date: May 2009
Location: St. Louis
Age: 39
Posts: 501
Received 41 Likes on 31 Posts
Same thing with looking for parts off of cars... try to find the paint matched side skirts and mud flaps if you need them off of the newer years of the 3.5RLs... Makes a noticeable difference.
Old 08-22-2013, 08:45 AM
  #122  
Cash Registered Member
 
Pro-Pilot's Avatar
 
Join Date: Mar 2013
Age: 35
Posts: 336
Received 10 Likes on 9 Posts
Yea, I like the steering wheel mod. As far as side skirts and mud flaps, I'm good on those. I'm thinking of making a short air intake since I don't particularly like how low the air duct is. Occasionally I have to go through water when it floods around here and it scares me every time because I know how low the duct goes (A few months ago I went through a "road lake" that ended up lapping at my headlights, scary stuff). I just bought an 04 Audi All-road yesterday for $3900 and realized how high the intake in that was (of course, it's a different vehicle capable of different stuff....but still) so that made me think about how low the RL was.

Any suggestions on a short intake?

Last edited by Pro-Pilot; 08-22-2013 at 08:48 AM.
Old 08-22-2013, 09:07 AM
  #123  
2004 Carbon Gray 3.5RL
Thread Starter
 
99blackhatch's Avatar
 
Join Date: May 2009
Location: St. Louis
Age: 39
Posts: 501
Received 41 Likes on 31 Posts
Not really. The Legends have the same type of engine set up though... I'm sure if you do a search for an intake for those, you'll find something for our car or just use an aftermarket intake for a Legend on the RL of course.

Personally... after working on Hondas for years, i think the one thing i would never mess with after everything I've pieced together and tweaked would be the air box / intake. I'd say replace the filter to a better one, maybe K+N and go from there... if needed, remove the lower portion of the intake tubes that run up to the intake if you're that worried about it...


But over the years, I did the cold air intake and then went to short ram, and then went to a intake tube with the stock air box and removed the lower shroud on the intake box... that worked well for me for years on my old Civcs. Just my two pennies...

Old EK Civic setup... don't worry, I didn't keep it Matte Hunter Green for long.

Last edited by 99blackhatch; 08-22-2013 at 09:09 AM.
Old 08-22-2013, 09:17 AM
  #124  
Cash Registered Member
 
Pro-Pilot's Avatar
 
Join Date: Mar 2013
Age: 35
Posts: 336
Received 10 Likes on 9 Posts
Camouflaged Civic FTW lol

I had a 97 accord matte black for the majority of the time as well.

You're right, I'll probably just remove the lower portion. Unfortunately, I'm missing both front fenderliners as well as the center bottom one, so that air tube is protecting my fog light from getting drenched when it rains. I'll have to cut my losses I suppose.

Fenderliners are ridiculously expensive. I would be looking at about 350 to replace em.
Blah
Old 08-22-2013, 10:14 AM
  #125  
2004 Carbon Gray 3.5RL
Thread Starter
 
99blackhatch's Avatar
 
Join Date: May 2009
Location: St. Louis
Age: 39
Posts: 501
Received 41 Likes on 31 Posts
Interesting... check that www.car-parts.com and see if they have anything for you on there.

I'll keep my eyes peeled at the local yards as well.
Old 08-22-2013, 10:32 AM
  #126  
Cash Registered Member
 
Pro-Pilot's Avatar
 
Join Date: Mar 2013
Age: 35
Posts: 336
Received 10 Likes on 9 Posts
Thanks.

I saw some on car-parts for 90-100. Might as well buy it new. I probably need to get them before I shorten the air tube anyway.
Old 08-22-2013, 11:13 AM
  #127  
2004 Carbon Gray 3.5RL
Thread Starter
 
99blackhatch's Avatar
 
Join Date: May 2009
Location: St. Louis
Age: 39
Posts: 501
Received 41 Likes on 31 Posts
I check Craigslist as well... sometimes, or at least around here, they post them as parts cars to pick over.

Check on there and see what happens.


Craigslist > Auto Parts > Acura RL
Old 08-22-2013, 03:59 PM
  #128  
2004 Carbon Gray 3.5RL
Thread Starter
 
99blackhatch's Avatar
 
Join Date: May 2009
Location: St. Louis
Age: 39
Posts: 501
Received 41 Likes on 31 Posts
Ok...now shopping for more new accessories.

Colored lug nuts... lol.
Old 08-22-2013, 08:07 PM
  #129  
Cash Registered Member
 
Pro-Pilot's Avatar
 
Join Date: Mar 2013
Age: 35
Posts: 336
Received 10 Likes on 9 Posts
I hope your car loves you as much as you love it lol
Old 08-22-2013, 08:40 PM
  #130  
Instructor
 
vipRL171's Avatar
 
Join Date: Jul 2013
Location: hampton roads, virginia
Posts: 223
Received 2 Likes on 2 Posts
^^ colored lug nuts for the win. i had a set of muteki open ended burning neon blue lugs loved the color of them when sun hit them were like a blue and purple.
Old 08-23-2013, 07:32 AM
  #131  
2004 Carbon Gray 3.5RL
Thread Starter
 
99blackhatch's Avatar
 
Join Date: May 2009
Location: St. Louis
Age: 39
Posts: 501
Received 41 Likes on 31 Posts
I was looking at those exact lugs actually. Lol

Or a teal color for fun and then powder coat my calipers to match... or powder coat them all black and finish my new modification. Ugh.

Fucking decisions
Old 08-23-2013, 07:36 AM
  #132  
Instructor
 
vipRL171's Avatar
 
Join Date: Jul 2013
Location: hampton roads, virginia
Posts: 223
Received 2 Likes on 2 Posts
haha yea i have used those lugs on 4 differnt cars i loved them. look great with silver wheels.
Old 08-23-2013, 01:17 PM
  #133  
2004 Carbon Gray 3.5RL
Thread Starter
 
99blackhatch's Avatar
 
Join Date: May 2009
Location: St. Louis
Age: 39
Posts: 501
Received 41 Likes on 31 Posts
So damn tempting...

I'm considering hitting the "Buy now" button. Lol
Old 08-26-2013, 01:15 PM
  #134  
2004 Carbon Gray 3.5RL
Thread Starter
 
99blackhatch's Avatar
 
Join Date: May 2009
Location: St. Louis
Age: 39
Posts: 501
Received 41 Likes on 31 Posts
Few teaser shots..
and since it's "Defective Material", I felt this was fitting.






Old 08-26-2013, 08:03 PM
  #135  
Instructor
 
vipRL171's Avatar
 
Join Date: Jul 2013
Location: hampton roads, virginia
Posts: 223
Received 2 Likes on 2 Posts
damn man. your car is so clean.
Old 08-27-2013, 07:48 AM
  #136  
2004 Carbon Gray 3.5RL
Thread Starter
 
99blackhatch's Avatar
 
Join Date: May 2009
Location: St. Louis
Age: 39
Posts: 501
Received 41 Likes on 31 Posts
Thank you.
It's been a long road, but i'm glad she is getting somewhere.
Old 08-28-2013, 10:49 AM
  #137  
2004 Carbon Gray 3.5RL
Thread Starter
 
99blackhatch's Avatar
 
Join Date: May 2009
Location: St. Louis
Age: 39
Posts: 501
Received 41 Likes on 31 Posts
a few more...




Old 08-28-2013, 10:59 AM
  #138  
Moderator
iTrader: (3)
 
CLtotheTL32's Avatar
 
Join Date: Sep 2008
Location: Charlotte
Age: 35
Posts: 36,653
Received 9,493 Likes on 6,165 Posts
Gorgeous new pictures
Old 08-28-2013, 11:17 AM
  #139  
Cash Registered Member
 
Pro-Pilot's Avatar
 
Join Date: Mar 2013
Age: 35
Posts: 336
Received 10 Likes on 9 Posts
One day, I will be at your level

One day......
Old 08-28-2013, 11:30 AM
  #140  
2004 Carbon Gray 3.5RL
Thread Starter
 
99blackhatch's Avatar
 
Join Date: May 2009
Location: St. Louis
Age: 39
Posts: 501
Received 41 Likes on 31 Posts
Thank you gentlemen. It took a while to get here, but it's all working out finally.

I'll post pictures in a bit about a mod i tried that didn't work out well.
Old 08-28-2013, 03:05 PM
  #141  
Advanced
 
VNMISS04's Avatar
 
Join Date: Aug 2007
Location: Charlotte, NC
Age: 40
Posts: 58
Received 3 Likes on 3 Posts
Thanks for making my car look good....LOL jk :-p

Old 08-28-2013, 03:55 PM
  #142  
2004 Carbon Gray 3.5RL
Thread Starter
 
99blackhatch's Avatar
 
Join Date: May 2009
Location: St. Louis
Age: 39
Posts: 501
Received 41 Likes on 31 Posts
You need to work on your RL and get that Mustang out of the pictures.

just kidding
Old 08-28-2013, 04:07 PM
  #143  
Cash Registered Member
 
Pro-Pilot's Avatar
 
Join Date: Mar 2013
Age: 35
Posts: 336
Received 10 Likes on 9 Posts
AHHHHH A FORD!!

(lol)
Old 08-29-2013, 10:22 AM
  #144  
Instructor
 
vipRL171's Avatar
 
Join Date: Jul 2013
Location: hampton roads, virginia
Posts: 223
Received 2 Likes on 2 Posts
Originally Posted by 99blackhatch
Thank you gentlemen. It took a while to get here, but it's all working out finally.

I'll post pictures in a bit about a mod i tried that didn't work out well.
Pics looks good as always lol.. interested to see this mod that didnt work out hmm lol
Old 08-29-2013, 10:54 AM
  #145  
Cash Registered Member
 
Pro-Pilot's Avatar
 
Join Date: Mar 2013
Age: 35
Posts: 336
Received 10 Likes on 9 Posts
Originally Posted by vipRL171
Pics looks good as always lol.. interested to see this mod that didnt work out hmm lol
He's lying, his mods ALWAYS work!
The following users liked this post:
99blackhatch (08-29-2013)
Old 08-29-2013, 12:54 PM
  #146  
2004 Carbon Gray 3.5RL
Thread Starter
 
99blackhatch's Avatar
 
Join Date: May 2009
Location: St. Louis
Age: 39
Posts: 501
Received 41 Likes on 31 Posts
so a big thing in the TL community is how the new RDX has brake caliper covers... well, i decided to jump on the bandwagon and look into it considering that they are $12 / each cover... Not a bad way to hide the ugly calipers and clean things up and have "ACURA" on the fronts.

Well, they don't really... fit. I'm going to play with it a little more and paint the calipers gloss black and see if i can match it slightly. Like i said, at the most, I'm out $37... but if it works out and looks decent, then i'll run with it for a while until i upgrade all the brake components finally.

Old 08-29-2013, 01:09 PM
  #147  
2004 Carbon Gray 3.5RL
Thread Starter
 
99blackhatch's Avatar
 
Join Date: May 2009
Location: St. Louis
Age: 39
Posts: 501
Received 41 Likes on 31 Posts
Here is another look at the wheels set up... After looking at it on here, i think it might be too much to try to cover up or work with... I might start shopping for new ACURA calipers sooner than expected...
Old 08-29-2013, 01:12 PM
  #148  
2004 Carbon Gray 3.5RL
Thread Starter
 
99blackhatch's Avatar
 
Join Date: May 2009
Location: St. Louis
Age: 39
Posts: 501
Received 41 Likes on 31 Posts
But on a positive note, I'm also doing a little research and might go out and buy two things this weekend.

No more details than that.
Old 08-29-2013, 03:46 PM
  #149  
Instructor
 
vipRL171's Avatar
 
Join Date: Jul 2013
Location: hampton roads, virginia
Posts: 223
Received 2 Likes on 2 Posts
^^ covers would look good if they would fit right lol. but hmm no details . guess we gotta wait it out then lol.
Old 08-29-2013, 03:57 PM
  #150  
2004 Carbon Gray 3.5RL
Thread Starter
 
99blackhatch's Avatar
 
Join Date: May 2009
Location: St. Louis
Age: 39
Posts: 501
Received 41 Likes on 31 Posts
Gotta make sure things line up. No biggie. You can wait.
Old 08-29-2013, 04:40 PM
  #151  
Cash Registered Member
 
Pro-Pilot's Avatar
 
Join Date: Mar 2013
Age: 35
Posts: 336
Received 10 Likes on 9 Posts
Curious if I can move the bags from my Audi to my RL.....hmm....
Old 09-03-2013, 07:32 AM
  #152  
2004 Carbon Gray 3.5RL
Thread Starter
 
99blackhatch's Avatar
 
Join Date: May 2009
Location: St. Louis
Age: 39
Posts: 501
Received 41 Likes on 31 Posts
I'm going to go with... doubtful. It might be possible, but highly doubtful.
Old 09-09-2013, 07:49 AM
  #153  
2004 Carbon Gray 3.5RL
Thread Starter
 
99blackhatch's Avatar
 
Join Date: May 2009
Location: St. Louis
Age: 39
Posts: 501
Received 41 Likes on 31 Posts
Had a bit of an off weekend. Nothing worked out to plan and things got messed up so I didn't get to work on the car like i wanted to, but i decided to play around and see what would happen if I messed with the TL wheels...

Don't mind the slight over spray... I figured i'd clean them up at the end. Lol




I never got to test fit them and only got two done, but i might play with them tonight to see how they look for fun.
Old 09-10-2013, 07:49 AM
  #154  
2004 Carbon Gray 3.5RL
Thread Starter
 
99blackhatch's Avatar
 
Join Date: May 2009
Location: St. Louis
Age: 39
Posts: 501
Received 41 Likes on 31 Posts
Well.. i kind of like the white look on the gray car. Kind of. But white TL wheels on the RL... they don't look right. Lol


But at least now I get to work on the car more since one of the lugs got messed up! New parts again! Lol But I put the Klutch wheels back on all around and I'm pleased with that more than ever.



Old 09-10-2013, 09:20 AM
  #155  
Cash Registered Member
 
Pro-Pilot's Avatar
 
Join Date: Mar 2013
Age: 35
Posts: 336
Received 10 Likes on 9 Posts
Hmm I kinda like the look. Looks clean, although it probably looks a little different in the daytime.
Old 09-10-2013, 09:31 AM
  #156  
2004 Carbon Gray 3.5RL
Thread Starter
 
99blackhatch's Avatar
 
Join Date: May 2009
Location: St. Louis
Age: 39
Posts: 501
Received 41 Likes on 31 Posts
Well... i might do it again but on a different type of wheel. I liked the white, but i think if i did something sporty, I'd go for the Work Emotion Kai CR in white for fun... but who knows...

I guess I'm still in my "tuner car" state of mind. Lol
Old 09-10-2013, 10:31 AM
  #157  
Cash Registered Member
 
Pro-Pilot's Avatar
 
Join Date: Mar 2013
Age: 35
Posts: 336
Received 10 Likes on 9 Posts
lol it's all good. Im thinking about making my rims white...might look good. What spray did you use?
Old 09-10-2013, 11:07 AM
  #158  
2004 Carbon Gray 3.5RL
Thread Starter
 
99blackhatch's Avatar
 
Join Date: May 2009
Location: St. Louis
Age: 39
Posts: 501
Received 41 Likes on 31 Posts
Plastidip white from LOWES.... figured I'd try it out.

Brake dust on it since it's a Matte finish sucks. Just a heads up
Old 09-10-2013, 11:22 AM
  #159  
Cash Registered Member
 
Pro-Pilot's Avatar
 
Join Date: Mar 2013
Age: 35
Posts: 336
Received 10 Likes on 9 Posts
Hmm, everyone has a different opinion on plastidip. Some people say its trash, some people say its okay....I guess it depends who applies it and how good of a job it is done. I wouldn't mind trying it though. So how many cans did you get to completely do all 4? And I suppose I can not bother to cover the tire and I can just peel off the overspray correct?

If brake dust gets on it can you clean it with water without tearing it?
Old 09-10-2013, 12:20 PM
  #160  
2004 Carbon Gray 3.5RL
Thread Starter
 
99blackhatch's Avatar
 
Join Date: May 2009
Location: St. Louis
Age: 39
Posts: 501
Received 41 Likes on 31 Posts
See, i only did 2 wheels and when i picked up the wheels, there was already brake dust getting on it in some spots which was annoying.

I tried to get that one lug off last night and sprayed some PB Blaster on the lug to help, it ran down the wheel and messed up the Plastidip and some of it came off completely in the lug holes... granted i didn't prep those well.

But i think it's a cool idea depending on the application, but white Plastidip on wheels... it might not hold up well and i applied 3-4 coats.

If i was to do white wheels... I'd prefer to powder coat honestly.


Quick Reply: Been a while, bought another RL...



All times are GMT -5. The time now is 05:25 PM.