Anyone Ever used These?-Wobble bolts
#1
Anyone Ever used These?-Wobble bolts
Hey Everyone!
As i need tires on my car at this time...i have been looking for many oem rims. I have some a-specs 8.5 wide sitting/stacked/no tires...but i want something different.
In my search i ran across "Wobble bolts" In quick summary they are lug bolts with a variable top washer that allows for a range of patterns to be used. The acceptable variance to my knowledge is 2.4mm....they all have a floating washer. In essence when tightened they go in straight but within their range. Safety concerns??? Been around for years with no reports i see of any fault. I would peg them safer than wheel adapters.
With that said 5x112 wheels (mercedes, audi vw amongst others at 115mm) come into mind...
Quick google search will lead to many results. The bolts themselves cost about 80-100$ for a set of 20.
On another note there is ONE oem wheel i am currently after as well. 16x7+5 offset. (low i know) They are commonly used in tuner market. Comes from late 90's Crown vics. BBS mesh wheels...with a stepped lip.
Open for feedback on anything. Pics attached
As i need tires on my car at this time...i have been looking for many oem rims. I have some a-specs 8.5 wide sitting/stacked/no tires...but i want something different.
In my search i ran across "Wobble bolts" In quick summary they are lug bolts with a variable top washer that allows for a range of patterns to be used. The acceptable variance to my knowledge is 2.4mm....they all have a floating washer. In essence when tightened they go in straight but within their range. Safety concerns??? Been around for years with no reports i see of any fault. I would peg them safer than wheel adapters.
With that said 5x112 wheels (mercedes, audi vw amongst others at 115mm) come into mind...
Quick google search will lead to many results. The bolts themselves cost about 80-100$ for a set of 20.
On another note there is ONE oem wheel i am currently after as well. 16x7+5 offset. (low i know) They are commonly used in tuner market. Comes from late 90's Crown vics. BBS mesh wheels...with a stepped lip.
Open for feedback on anything. Pics attached
The following users liked this post:
1sik_ka9_1day (01-15-2014)
#4
They make wobble nuts and wobble bolts. Carry on thread.
The following users liked this post:
1sik_ka9_1day (01-19-2014)
#5
^^in light of new presented information (thanks!!) im interested again.
i never really ran a search but was thinking the same concept could be applicable in nut form.
so anyone have a top choice favorite vw audi mb rims???
i have a few faves... a8 pie plates/amg monoblocks/audi bbs variants/list goes on
i never really ran a search but was thinking the same concept could be applicable in nut form.
so anyone have a top choice favorite vw audi mb rims???
i have a few faves... a8 pie plates/amg monoblocks/audi bbs variants/list goes on
#6
heres a link for 20...far cheaper.
i may just bite the bullet and b the one to try something new here
http://www.ebay.com/itm/CONVERSION-PCD-WOBBLY-VARIABLE-NUTS-BOLTS-NEW-SET-OF-20-/300551224602?pt=UK_Cars_Parts_Vehicles_Wheels_tyres_Trim_Nuts_ET&hash=item45fa3fbd1a
....even cheaper!
http://www.ebay.com/itm/20-X-M12-X-1-5-VARIABLE-WOBBLY-TAPERED-ALLOY-WHEEL-NUTS-FIT-CHRYSLER-SEBRING-/201005035856?pt=UK_Cars_Parts_Vehicles_Wheels_tyres_Trim_Nuts_ET&hash=item2eccd57150
i may just bite the bullet and b the one to try something new here
http://www.ebay.com/itm/CONVERSION-PCD-WOBBLY-VARIABLE-NUTS-BOLTS-NEW-SET-OF-20-/300551224602?pt=UK_Cars_Parts_Vehicles_Wheels_tyres_Trim_Nuts_ET&hash=item45fa3fbd1a
....even cheaper!
http://www.ebay.com/itm/20-X-M12-X-1-5-VARIABLE-WOBBLY-TAPERED-ALLOY-WHEEL-NUTS-FIT-CHRYSLER-SEBRING-/201005035856?pt=UK_Cars_Parts_Vehicles_Wheels_tyres_Trim_Nuts_ET&hash=item2eccd57150
Thread
Thread Starter
Forum
Replies
Last Post
neuronbob
3G RLX Tires, Wheels & Suspension
23
07-16-2019 10:48 AM