v-takyo!!

I can't either!! And ye I'm copying your swag!!! And blazin I put wood floors in my trunk so the subs were sliding everywhere I bought a Velcro and put it under the box and it has an adhesive to the wood floor so it's set!!lol

Blazin Si

Ah, sweet. I just took a look at you build thread. Is that real wood or the scratch resistant stuff that's sold at Home Depot?

v-takyo!!

It's wood

97BlackAckCL

iTrader: (6)

So yesterday, got the car inspected (state inspection) and it passed for the 3rd or 4th year in a row with the same tires, pads, rotors and wipers.
Last night, got everything ready to go.






Today I got up at the asscrack of dawn again to be first at the tire place, and 40 mins later, I went for a drive and took a few pics of my dirty car with shiney rims




Had to put the rims on to see about rubbing before I lowered the car anymore, I'm going to drive on these for a bit and see how much lower I want to go, but the wheel gap isn't that bad.




Had these babies for 3 years, had the tires for a year, finally found a place that wasn't raping on labor to install them. Paid $85 out the door, NTB wanted over $200. But I am taking my truck there, so I stopped there to get a quote and took pics in their parking lot

Blazin Si

Badass. The wheels look great. 912's are the best tires I've owned for daily driver. They're so quiet.

97BlackAckCL

iTrader: (6)

Good to hear, I had 512's on my stock wheels, but the 912's sure seem like a better tire all around. You definitely feel the road more with a 40 series tire

DaInFaMMuS1

That was the 1st text i woke up to Chris lol. I was like FINALLYYY he did it! LOL! Looks great!

South Jersey CL

VERY nice chris. they make your car look so sexy.

BustedS13

in the last two weeks the sunroof stopped opening and now it won't start. so i put it up on craigslist.

South Jersey CL

changed the oil, got new goodyear tires on the front, and in the process of packing her up. moving back to virginia on tuesday

spencer_homer

looks really good chris. but slammage is needed

97BlackAckCL

iTrader: (6)

Thanks man, definitely need to lower the coils a little more, there's less wheel gap than I thought, probably gonna drop another half inch or so

Sticking with the productivity, I took the 4Runner to NTB today to get an axle replaced, get the wheels rebalanced and rotated, and get an alignment. I don't know what I'll do driving 2 cars with good alignment everyday, it will be weird

C4PT41N_73TH47

so clean, its about time

asianspec

iTrader: (1)

im doing the same with the CL and a 96 Camry.

hwdp420pl

your wheels look verry similar to mine looks good =)

f22vtec

nice man I forgot to show a close up of my rims too I finally got Acura center caps for them. I thought u had a ww lip?

mattastick

I got the same text, and had the exact same thought. LOL. Looking good though Chris.

As for my CL, I was supposed to have the box built for the subs on Friday, then that got pushed back to today, and now it's pushed back for another day or so at least. Subs should be here on Tuesday, so I may build then, just not sure yet. It's gotta be done by Friday night so I can get at least a bit of sleep before heading out Saturday morning around 9am for the meet. And this is just one of many audio things that need to be sorted out before the meet... Hooray, it's going to be a fun week.

97BlackAckCL

iTrader: (6)

Thanks man, I know

Yeah, I actually almost got your same rims, but got a great deal on these 3 years ago so I grabbed them

I have 2 ww lips

Get on it bitch

mattastick

You sush... You've got just as much work as me, if not more

f22vtec

two?!?! ahhaa

mattastick

Don't worry. 1's coming home to Ohio with me after this weekend's meet...

97BlackAckCL

iTrader: (6)

front and rear

Matt, you won't make it out of the driveway

mattastick

My car may be slower and not handle as well, but I'll have incentive on my side... Or I'll just have my buddy distract you and then he'll be on his own...

97BlackAckCL

iTrader: (6)

Matt, you'll have to get them off the car first, and past 2 vicious guard pit bulls

Drove the car today on the highway for the first time with the new rims, car rides so smooth with the teins, the alignment, and the new rims/tires. You can definitely feel the road more with the 40 series tires, but it drives great, I'm very pleased

mattastick

Ah, shit. Forgot about your dogs...

asianspec

iTrader: (1)

if its like chico then bring alot of 99 cent bolonga and some special brownies.

littlekoreanboi

fixed my passenger side regulator! only took me an hour to do (but now that i know what im doing, i'd say 20 mins top!)

Blazin Si

Another Hawaii member... There's a reputation you must live up to. Don't screw it up!

mitch14

did an oil change at about 12 last night, hooked up the back speakers again after that.
And then started my drive from my house at 7am, just made it to chicago now.
so put 1400kms(870 miles) give or take on the cl today
so it's time for both of us to sleep.

nice work on the rims Chris, i think it needs more slam, but that's just personal opinion, maybe an inch or so... you should leave your ride height a surprise for the meet.
i especially want to compare my ride height with Matt
i keep forgetting how high cl's are stock, and i want to see what the difference is, cuz people always ask me how much i lowered it.

asianspec

iTrader: (1)

lol go to the wiener circle in chicago. it will crack you up.

97BlackAckCL

iTrader: (6)

I'm sure you're lower than mine, but not by much. I'm leaving the ride height where it is until after the meet, but I'll have plenty of other things done by then. I did some work on her last night, doing some more today, and taking her to get the tranny fluid changed

mattastick

New box is most of the way done. I forgot to cut a couple pieces for the port, but they shouldn't make too much of a difference to worry about. They're just 45's, and I'll probably rebuild this box in a couple weeks anyway out of birch for the weight savings.

97BlackAckCL

iTrader: (6)

Had my buddy drain and fill my tranny fluid today, car shifts so smooth. It had been shifting real hard, but runs real smooth. I usually drain and fill right when I take her out for the summer, but waited a while. Definitely glad I finally got around to it. Also got my CF woodgrain piece switched out with the new one Travis made for me, and installed my Pioneer double din. Was a busy day, but very worth it.

v-takyo!!

doing my black housing tomorrow but i have a small issue dont know how to do amber corners

DaInFaMMuS1

What was wrong with the old carbon fiber pieces you had on?

mattastick

Yesterday, I drove the Acura for the first time in a couple weeks. The bouncing idle that a car gets after sitting for awhile is becoming a normal thing when I do get around to driving it. Other than that, I'm still trying to figure out my power distribution setup for this weekend. If worse comes to worse, I can bolt ring terminals together, but I'd rather not do that if I don't have to because it'll look as hell.

97BlackAckCL

iTrader: (6)

One of the fibers had snagged, and it had a big U shape in the weave, also it looked rushed and a few sections the resin wasn't smooth or sanded right. Someone on here I think shnee pointed it out in the pics and Travis sourced another piece and made me a new one. Just took me a year to put it on

spencer_homer

take the corner lens out. and tint it with amber tint spray, or translucent orange model paint. translucent being the key word, aka tint

f22vtec

the spray you can find on ebay the brand is vans.

mitch14

^damn, left already, what was it?
oh and we did one of the segway tours while we were there, it as actually pretty good, got to see a lot

well my front drivers side is a bit higher than the rest i think, and a little higher than i want it. i was going to go a bit lower all around, but i'm already kind of used to this height, and there are so many places i scrape but still get by, and i certainly don't want to get hung up anywhere.



so.... what did i do to the cl today... drove it from Chicago to Cleveland basically.
fucked up the flex pipe more when i bottomed out in Indiana, and got my amber corner almost completely knocked out by a tire the car infront on me kicked up...
all in days work for a lowered cl from Canada i guess