mcajka

ok so today my exhaust rusted out but thats no biggie. the bigger problem is that my tires all wear on the inside edge. now i know thats a camber problem and i had that fixed before winter happened and now i have the same problem again. is it because the frame might be bent or what could it be. this car has been from michigan to ohio to here and it was in a wreck and i hit a deer this fall so that might be it as well. i need to know asap i want this car problem fixed or resolved. thank you please help MEEEEEE

97BlackAckCL

iTrader: (6)

You're not lowered yet are you? Sounds like an alignment / camber adjustment problem, get it done on a 4 wheel computerized laser alignment machine. Otherwise the frame could be twisted, but sounds more like your alignment is out of whack

hornedfrog2000

Takes a pretty good accident to bend a frame normally.

SupraManAG

if you aren't lowered then your toe is off. more toe than camber. If you are lowered then its deff your camber. either ways you need a wheel alignment. before you do so, find out if the people you take it to do a good job. most people dont know how to do a wheel alignment because they are simply retarted. the first place i took it to overcharged me and did a real shitty job. everything came loose in a month. so beware.

ZeroCL

Get a wheel alignment for sure.

97BlackAckCL

iTrader: (6)

to the toe if you're on stock coils

mcajka

im stock still yes...i had my camber and alignment done today which im lucky we know the guy who does ours...turns out nothing is wrong and its not my driving and he thinks it is a bent frame that is doing it.

hornedfrog2000

I would get a second opinion, because that is a very expenisve problem, and not easy to fix it CORRECTLY

mcajka

if it was a bent frame its gone im not going to try and fix that

mcajka

needless to say it was a frame problem...insurance is going to give us money for it and im buying it back for 1500 so itll be mine again then off to get a beater and become one of project sneaky member

SwervinCL

How did they figure out that the frame is bent?

mcajka

i dont know how they did it but im glad they did....