NauTiC*

This is something I would be interested in doing, granted reliability and idle were not sacrificed. What gains can be expected from these two mods?

I read somewhere on here where cams,cam gears, port and polished head, throttle body and intake mani can yield a good 50 HP, not sure if that's true...

Enlighten a noob.

ayougo

if your a 2.2 id suggest a delta cam regrind. Call em up and tell them what you have ( mods wise ) and how aggressive you want it and they'll do a nice regrind for you.

wilp99

isnt the 2.3 cam more agressive than the 2.2 being that is .1 litres bigger.

NauTiC*

Hows the idle and reliability with an aftermarket cam or regrind ?

ghost_masterCL

depends on teh cam or regrind.

shineynitelite

i wouldnt be worried about that stuff till you were done w/

intake, headers, cat back, pullies

thannnnnn cam stuff

97BlackAckCL

iTrader: (6)

SwervinCL

I posted that. I got that info on www.mmrusa.com look around on there. you can get a package deal for like 1600.

DBLOCK1226

I Have 3.0 With Intake And Headers. Whats The List Of Parts I Would Need To Buy Concerning Cams And Gears I'm NOT Familar With Those Parts

97BlackAckCL

iTrader: (6)

Search man, your only option would be to get 3.2 Type S cams and get them machined

Cocoa

iTrader: (2)

He's right...

You can get the cams for $250 new from the dealership, and have them machined for about $120...

lnsyone

custom vtek mean muggin cams

NauTiC*

Makes sense. So after i/h/e plus cam and cam gear, what hp gains can be expected?

wakeboardfusion

how hard is it to put the cls cams in, do you gotta take the motor out or waht?
is it the cam shaft or cam? and what is the gain from them

wilp99

i too have type-s cams.. they are attatched to a type s motor tho. in my tl. im cool.

SwervinCL

Shut your face

97BlackAckCL

iTrader: (6)

shineynitelite

not sure

NauTiC*

What gear were you in on your avatar? I'm assuming you have a 5 speed.

shineynitelite

2

SanJoseRoller

reading over at v6p.net the J30A1 accords got something around the area of 8-10 horse's from the cams ... to the floor

97BlackAckCL

iTrader: (6)

NauTiC*

Not bad. So coupled with a good i/h/e set up you can possible yield a little more than 8-10 hp right ? I'm just curious at this point, `cause come spring I plan on adding i/h/e(among other little mods) all at once and I wanna see If I should waste my time and money adding a cam and cam gear only to achieve minimal gains in hp, ya dig?

Cocoa

iTrader: (2)

I gained 25whp with intake, headers, exhaust, pullies, and vafc2 tuned. There is a thread with my dyno on the boards. The camshafts tuned with those mods should be around 12-15whp gain.

Cocoa

iTrader: (2)

As of now they don't make cam gears for our cars (3.0's). But someone out on the eastcoast had a custom one made for his car. He ran a 13.3 in his 3.0 with a 125 shot. He is currently selling his car.

NauTiC*

Damn, not bad cocoa. At first I thought you were being sarcastic when I read "I gained 25whp with intake..." I have a 2.3 so I know they have cams out there, just a matter of finding one. A good 30-40 dont soud bad at all with i/h/e, pullies, cam and cam gear, and of course a good tuning. The 2.x needs it bad.

Cocoa

iTrader: (2)

Damn, I found the old thread about my dyno, but it wont show up. I'll have to scan it again and show you the numbers if you want to see them...

NauTiC*

yea, post it when ever you get the time.