Current PROJECT you're working on
#881
Senior Moderator
Damn i can't even find a picture of them on Google, they must be rare lol.
#882
CL in lawnmower status
they seem like probably a good wheel, but 7 inch wide and +45 offset...
to each their own
let's see some pictures of these, tried searching and could only find the s1&2 and the n1 and gt1 by Black Racing... and their GT1's look like Enkei RPF1's, and there s1's look like Advan RG's...
#889
Drifting
Look what else was in that box:
And how they currently sit:
Gonna be running to a store for some paint and sealant here in a bit. Then it's back to work and getting these babies done. They've been a huge pain so far (took about 6 hours to get apart), but they should be worth it in the end...
Thoughts?
And how they currently sit:
Gonna be running to a store for some paint and sealant here in a bit. Then it's back to work and getting these babies done. They've been a huge pain so far (took about 6 hours to get apart), but they should be worth it in the end...
Thoughts?
#891
Stay Low Pro Kinfolk
Those are ghettoninjas upside down projos right? and 6 hours to open em?! the bumper takes no more than like 20 minutes, and opening the lights is easy if u prebake them and let the sealent get hot so you can pry them apart. Unless you can't prebake because of the projos o.O?
Anyway, Nice job, and I can't wait to see the outcome. I hope you get it all figured out. Sealent is a pain if you get it on your clothes btw lol.
Anyway, Nice job, and I can't wait to see the outcome. I hope you get it all figured out. Sealent is a pain if you get it on your clothes btw lol.
#892
Drifting
Yes, they're Fred's.
See above. And yeah, 6 hours to get them baked (12 minutes at 200 degrees), pulled apart, and taking everything apart so I can re-use it, so I had to be careful. If I wasn't re-using everything, I would've been done in 20 minutes.
And yeah, I know how to get mine off and these on. I blackhoused my headlights awhile back, so I know how to get the bumper on/off. Not exactly easy with big fat fingers/hands like mine, but definitely not a long process.
Thanks, and I also look forward to them being done. And the stock sealant is a pain if it gets on your clothes. Working in old ass clothes ftw.
Anyway guys, I'll have a complete build thread up (hopefully) later tonight, but I guess we'll see. I just got done eating some dinner, now it's time to get these babies finished.
Those are ghettoninjas upside down projos right? and 6 hours to open em?! the bumper takes no more than like 20 minutes, and opening the lights is easy if u prebake them and let the sealent get hot so you can pry them apart. Unless you can't prebake because of the projos o.O?
Anyway, Nice job, and I can't wait to see the outcome. I hope you get it all figured out. Sealent is a pain if you get it on your clothes btw lol.
Anyway, Nice job, and I can't wait to see the outcome. I hope you get it all figured out. Sealent is a pain if you get it on your clothes btw lol.
And yeah, I know how to get mine off and these on. I blackhoused my headlights awhile back, so I know how to get the bumper on/off. Not exactly easy with big fat fingers/hands like mine, but definitely not a long process.
Thanks, and I also look forward to them being done. And the stock sealant is a pain if it gets on your clothes. Working in old ass clothes ftw.
Anyway guys, I'll have a complete build thread up (hopefully) later tonight, but I guess we'll see. I just got done eating some dinner, now it's time to get these babies finished.
#893
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
Thread Starter
iTrader: (6)
lookin good so far matt
#894
Drifting
Passenger's headlight was done last night (Ignore the 3 lights shining on the front, that's the light over the table I was working on):
Driver's light is still drying, but is now done:
Inside pic:
And yes, this time, they're the right side up
Driver's light is still drying, but is now done:
Inside pic:
And yes, this time, they're the right side up
#895
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
Thread Starter
iTrader: (6)
Wow you got those done fast since all the hard work was done. Nice work bro, can't wait to see them in person
#896
Drifting
Most of the hard work, yes. But 3 of the 4 mounting points on the passenger's side one came loose so it wasn't all gravy. So when are we going to have that OH/PA meet?
#898
Drifting
First off, thanks, and I can't wait for cutoff pics either. Second, did I need them yet, no. But will I need them for that other project I've told you about, yes. So don't worry, they'll go to good use.
#901
Drifting
BTW:
Pic taken with the car ~6' from the garage door. I may take 'er out tonight, and if I do, I'll be sure to grab plenty of pics for you guys. If not, Friday for sure.
Thoughts?
Pic taken with the car ~6' from the garage door. I may take 'er out tonight, and if I do, I'll be sure to grab plenty of pics for you guys. If not, Friday for sure.
Thoughts?
#902
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
Thread Starter
iTrader: (6)
gotta love the cutoff, especially when it's the right direction
#904
Drifting
Nice job on those Saiko. I was kinda wondering what was going on when we went from 1 n00b guide to a handful. But I like the way they're set up now a lot better. Much easier to look for certain info.
#905
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
Thread Starter
iTrader: (6)
Nice work Dan
#906
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
Thread Starter
iTrader: (6)
Now that I've got the CL on the road for the summer, I have a few days of projects lined up.
Remove mudflaps (Already done)
Replace broken rusted license plate brackets (Already done)
Modify double din dash kit for Pioneer Double Din touchscreen
Wire all speakers with crossovers to the highs amp already mounted in trunk
Finishing touches on my homelink conversion, including fabricating buttons and bracket modifications.
Mount fog lights to current bumper since it doesn't appear I will be getting a new one yet
Mount ww lips temporarily so that I can rock them for the summer
Get an alignment (should be interesting given how low the car is)
Get tires installed on 18" rims and install rims with custom centercaps and lugs.
Possibly more if the money fairy appears and gives me money
Remove mudflaps (Already done)
Replace broken rusted license plate brackets (Already done)
Modify double din dash kit for Pioneer Double Din touchscreen
Wire all speakers with crossovers to the highs amp already mounted in trunk
Finishing touches on my homelink conversion, including fabricating buttons and bracket modifications.
Mount fog lights to current bumper since it doesn't appear I will be getting a new one yet
Mount ww lips temporarily so that I can rock them for the summer
Get an alignment (should be interesting given how low the car is)
Get tires installed on 18" rims and install rims with custom centercaps and lugs.
Possibly more if the money fairy appears and gives me money
#907
Senior Moderator
Now that I've got the CL on the road for the summer, I have a few days of projects lined up.
Remove mudflaps (Already done)
Replace broken rusted license plate brackets (Already done)
Modify double din dash kit for Pioneer Double Din touchscreen
Wire all speakers with crossovers to the highs amp already mounted in trunk
Finishing touches on my homelink conversion, including fabricating buttons and bracket modifications.
Mount fog lights to current bumper since it doesn't appear I will be getting a new one yet
Mount ww lips temporarily so that I can rock them for the summer
Get an alignment (should be interesting given how low the car is)
Get tires installed on 18" rims and install rims with custom centercaps and lugs.
Possibly more if the money fairy appears and gives me money
Remove mudflaps (Already done)
Replace broken rusted license plate brackets (Already done)
Modify double din dash kit for Pioneer Double Din touchscreen
Wire all speakers with crossovers to the highs amp already mounted in trunk
Finishing touches on my homelink conversion, including fabricating buttons and bracket modifications.
Mount fog lights to current bumper since it doesn't appear I will be getting a new one yet
Mount ww lips temporarily so that I can rock them for the summer
Get an alignment (should be interesting given how low the car is)
Get tires installed on 18" rims and install rims with custom centercaps and lugs.
Possibly more if the money fairy appears and gives me money
Glad to hear you're getting to driver her again! I wanna see her on the road lower than b4 on them 18's!
#908
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
Thread Starter
iTrader: (6)
you and me both, if that bitch shows up, I'm tyin her up in my basement and usin her as a mac machine
Last edited by 97BlackAckCL; 07-11-2010 at 09:39 PM.
#911
CL in lawnmower status
^yeah that's right, you can't leave for long....AZine is your cocaine
if i could go back, i'd pay a little more and get a 98, for the interior and get one that had heated seats
if i could go back, i'd pay a little more and get a 98, for the interior and get one that had heated seats
#912
Custom User Title
iTrader: (10)
Haha, nah. As I said in the other thread that was ignored, I'm going to australia in the spring, for a year, so I don't want to continue paying off the remainder of my loan on the mazda3 while I'm away.
I found my old car on craigslist for $350, rims tires, and camber kit still on it... so I might buy it back and keep the spare parts baha. But we'll see what happens this weekend when I look at the car. It would be much better for me to not have a car payment. Plus, it'd be nice to drive a CL without a messed up steering rack!
I found my old car on craigslist for $350, rims tires, and camber kit still on it... so I might buy it back and keep the spare parts baha. But we'll see what happens this weekend when I look at the car. It would be much better for me to not have a car payment. Plus, it'd be nice to drive a CL without a messed up steering rack!
#915
Senior Moderator
#917
Drifting
#918
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
Thread Starter
iTrader: (6)
u have no idea