:: Excelerate Performance :: 4G Altenator + Power Steering Pulley ::
#1
Former Sponsor
Thread Starter
:: Excelerate Performance :: 4G Altenator + Power Steering Pulley ::
Hey Acurazine!
As some of you may know we're trying to organize a group of people who would be interested in some new pulleys for their Acuras!
We're looking to make an alternator and power steering pulley to help dress up the engine bays of your J-series.
What's it do?
These pulleys will offer 30-60% in weight savings and will look perfect with your UnorthodoxRacing Underdrive pulley, and of course the XLR8 Crank Pulley!
These could even offer slight power gains when paired with their aluminum counterparts.
What will it cost me?
The alternator pulley will be $99.00 plus shipping, and the power steering pump pulley will be $149.00 plus shipping.
How many people do we need?
As always, the more the merrier! So for every person we can get behind it we can take a dollar off the price (up to $20);
So if we can get 20 people behind either, the price will go down to $79.00 for the alternator pulley, or down to $129.00 for the power steering pulley.
The minimum number of people necessary to make this happen is 10 per pulley.
If we meet that goal it would make the price of the pulleys $89.00/$139.00. However, if we can't get 10 people behind either, we can't make them for you.
What will they fit?
2010-2014 Acura MDX, 2010-2014 Acura RL Sedan, 2010-2014 Acura TL (FWD/AWD), 2010-2014 TSX (V6), 2010-2014 Acura ZDX
Want to purchase them as a pair?
We can do that too! Purchasing them as a pair will get you another $10 off the total price; if we get 20 or more people for both, the price will be reduced to $198.00.
PM me with questions, or info for a pre-order!
__________________________________________________ _________________________________
If you don't have yourself a crank pulley already, click on the picture below! It'll show you where to get one!
Excelerate Performance
Connecticut's Finest
Hours 9:00am-6:00pm EST M-F
Contact us via Phone or E-Mail
For shipping and installation quotes.
What's it do?
These pulleys will offer 30-60% in weight savings and will look perfect with your UnorthodoxRacing Underdrive pulley, and of course the XLR8 Crank Pulley!
These could even offer slight power gains when paired with their aluminum counterparts.
What will it cost me?
The alternator pulley will be $99.00 plus shipping, and the power steering pump pulley will be $149.00 plus shipping.
How many people do we need?
As always, the more the merrier! So for every person we can get behind it we can take a dollar off the price (up to $20);
So if we can get 20 people behind either, the price will go down to $79.00 for the alternator pulley, or down to $129.00 for the power steering pulley.
The minimum number of people necessary to make this happen is 10 per pulley.
If we meet that goal it would make the price of the pulleys $89.00/$139.00. However, if we can't get 10 people behind either, we can't make them for you.
What will they fit?
2010-2014 Acura MDX, 2010-2014 Acura RL Sedan, 2010-2014 Acura TL (FWD/AWD), 2010-2014 TSX (V6), 2010-2014 Acura ZDX
Want to purchase them as a pair?
We can do that too! Purchasing them as a pair will get you another $10 off the total price; if we get 20 or more people for both, the price will be reduced to $198.00.
PM me with questions, or info for a pre-order!
__________________________________________________ _________________________________
If you don't have yourself a crank pulley already, click on the picture below! It'll show you where to get one!
Excelerate Performance
Connecticut's Finest
Hours 9:00am-6:00pm EST M-F
Contact us via Phone or E-Mail
For shipping and installation quotes.
#2
Drifting
iTrader: (5)
Would it be possible to move this thread or post an additional thread in the 4G main page or performance section? I'm sure it would get a lot more traffic that way and it states 2010-2014 AWD/FWD TL, 2009 should also be included. All that said im interested in the power steering pulley, but I remember speaking to UR a short time ago and they said there is no PS pulley on the 4G? Please correct me if I'm wrong.
The following users liked this post:
ExcelerateRep (02-23-2017)
The following 3 users liked this post by dregsfan:
#4
Former Sponsor
Thread Starter
Would it be possible to move this thread or post an additional thread in the 4G main page or performance section? I'm sure it would get a lot more traffic that way and it states 2010-2014 AWD/FWD TL, 2009 should also be included. All that said im interested in the power steering pulley, but I remember speaking to UR a short time ago and they said there is no PS pulley on the 4G? Please correct me if I'm wrong.
My apologies for the misinformation guys. I was having a mighty hard time finding an OEM power steering pulley and that would explain why!
I was trying to get the thread up before we were done for the day in an effort start getting people lined up; I was planning to look back into this, but you guys beat me to it.
The alternator pulleys are still for sale, same price, same plan; just no bundle unless you guys want to buy something that doesn't exist.
Thanks & sorry,
Craig
The following users liked this post:
justnspace (02-24-2017)
#8
Former Sponsor
Thread Starter
If you're interested please send me a PM with your name, vehicle info, and some form of contact info (email or phone number) so I can add you to our list!
Thanks guys!
Thanks guys!
#10
Former Sponsor
Thread Starter
So far we've got 5 people that have shown legitimate interest and given contact info.
We're still looking for people, let's get this made!
The more the merrier!
We're still looking for people, let's get this made!
The more the merrier!
#14
Former Sponsor
Thread Starter
Hey guys,
We were trying to get 10 people together to get the first run made, but we only have 6 people who have shown legitimate interest by providing contact information.
If there's anyone you can think of that may want one, let them know and tell them to shoot me a PM! Sorry for the wait, it's still something we're interested in doing however!
Thanks!
We were trying to get 10 people together to get the first run made, but we only have 6 people who have shown legitimate interest by providing contact information.
If there's anyone you can think of that may want one, let them know and tell them to shoot me a PM! Sorry for the wait, it's still something we're interested in doing however!
Thanks!
#17
Former Sponsor
Thread Starter
We are closer, still two people shy (assuming everyone who originally showed interest is still interested!).
I spoke to UR and they said they're still willing to make them for us, but everyone is just trying to make sure it's worth while before they go into development.
Send me a PM with contact info if you're interested, we'll get you on the list!
I spoke to UR and they said they're still willing to make them for us, but everyone is just trying to make sure it's worth while before they go into development.
Send me a PM with contact info if you're interested, we'll get you on the list!
#18
Former Sponsor
Thread Starter
Bumping the thread for the sake of everyone's engine bays!
Send us a PM if you want your alternator pulley to match your aluminum crank pulley!
Send us a PM if you want your alternator pulley to match your aluminum crank pulley!
#22
Former Sponsor
Thread Starter
We can get them made with 6, but the price will be $150 instead of $99 since we were planning on a 10 minimum.
Trying to get a 9th person on the list as we speak, which would mean one more to go! Then we can get them out and about for $99.
If you guys don't mind the $150 price tag we can start collecting payment asap! Let us know!
Trying to get a 9th person on the list as we speak, which would mean one more to go! Then we can get them out and about for $99.
If you guys don't mind the $150 price tag we can start collecting payment asap! Let us know!
#23
Racer
iTrader: (2)
We can get them made with 6, but the price will be $150 instead of $99 since we were planning on a 10 minimum.
Trying to get a 9th person on the list as we speak, which would mean one more to go! Then we can get them out and about for $99.
If you guys don't mind the $150 price tag we can start collecting payment asap! Let us know!
Trying to get a 9th person on the list as we speak, which would mean one more to go! Then we can get them out and about for $99.
If you guys don't mind the $150 price tag we can start collecting payment asap! Let us know!
#26
Former Sponsor
Thread Starter
And that makes 10!
I'll be getting emails/PMs out to everyone between today and tomorrow to touch base and discuss payments.
If you have any questions please feel free to ask!
I'll be getting emails/PMs out to everyone between today and tomorrow to touch base and discuss payments.
If you have any questions please feel free to ask!
#27
Intermediate
#31
Former Sponsor
Thread Starter
Still waiting on a few of you!
Any new inquiries or questions can go to performance@excelerateperformance.com
Thanks guys!
Any new inquiries or questions can go to performance@excelerateperformance.com
Thanks guys!
#34
Former Sponsor
Thread Starter
Hey guys, we're still waiting on a couple payments!
I've sent PMs/emails to all everyone on the list but haven't heard back from some. If you haven't gotten an email from us please PM me an email address so I can resend it to a good address, or send an email to performance@excelerateperformance.com and we can get everything straightened out like that!
Occasionally the emails will fall victim to the spam box, so please check there as well!
I've sent PMs/emails to all everyone on the list but haven't heard back from some. If you haven't gotten an email from us please PM me an email address so I can resend it to a good address, or send an email to performance@excelerateperformance.com and we can get everything straightened out like that!
Occasionally the emails will fall victim to the spam box, so please check there as well!
The following users liked this post:
ExcelerateRep (10-24-2017)
#38
Former Sponsor
Thread Starter
Hey AZ,
Sorry for the delay on the update! It's been crazy in shop lately and I honestly just noticed the activity on the thread. If anyone has questions they would like answered as soon as possible please feel free to send an email to performance@excelerateperformance.com. I'd be happy to answer whatever those questions may be. That being said, I'll try to get to this thread daily just to make sure we're not missing anything else.
Unfortunately we're down 3 guys as of today. Everyone who showed interest and provided information has been reached out to more than once. Two if them have not replied, and one has switched to a different platform. If anyone has interest in purchasing two to fill the gap, just let me know.
I'm going to get this posted on the Instagram along with some FaceBook groups today/tomorrow to help get the word out, and the pulleys going for those who have already submitted payment. Thank you everyone for the patience, we should have good news for you soon.
We're determined to make it happen, and couldn't do it without you!
Regards,
Craig
Sorry for the delay on the update! It's been crazy in shop lately and I honestly just noticed the activity on the thread. If anyone has questions they would like answered as soon as possible please feel free to send an email to performance@excelerateperformance.com. I'd be happy to answer whatever those questions may be. That being said, I'll try to get to this thread daily just to make sure we're not missing anything else.
Unfortunately we're down 3 guys as of today. Everyone who showed interest and provided information has been reached out to more than once. Two if them have not replied, and one has switched to a different platform. If anyone has interest in purchasing two to fill the gap, just let me know.
I'm going to get this posted on the Instagram along with some FaceBook groups today/tomorrow to help get the word out, and the pulleys going for those who have already submitted payment. Thank you everyone for the patience, we should have good news for you soon.
We're determined to make it happen, and couldn't do it without you!
Regards,
Craig
#40
Former Sponsor
Thread Starter
We're still down 2. Getting closer though!