J-series for Gatebil Extreme
#1
J-series for Gatebil Extreme
Hi!
We are planing to build one engine for use in drifting and one for the Gatebil Extreme racing series here in Norway. The Honda J-series engine with a single turbo seemed like a good basis for this kind of use. We will be looking for about 7-800hp. But what parts to use? Which block handles boost the best? What head and crank is the best? Anyone other than Pauter that makes conrods for these engines?
We also need to know the outside dimensions of these engines. Length, width and hight.
Will be grateful for all answers
We are planing to build one engine for use in drifting and one for the Gatebil Extreme racing series here in Norway. The Honda J-series engine with a single turbo seemed like a good basis for this kind of use. We will be looking for about 7-800hp. But what parts to use? Which block handles boost the best? What head and crank is the best? Anyone other than Pauter that makes conrods for these engines?
We also need to know the outside dimensions of these engines. Length, width and hight.
Will be grateful for all answers
#2
3.5 psi
iTrader: (1)
check out this thread for some help (gerzand's car): https://acurazine.com/forums/perform...-809481/page2/
I'd stick with a built 3.6L with J32A2 heads to take advantage of the proper headers. The newer J blocks have the exhaust manifold cast into the heads for emissions.
I'd stick with a built 3.6L with J32A2 heads to take advantage of the proper headers. The newer J blocks have the exhaust manifold cast into the heads for emissions.
Thread
Thread Starter
Forum
Replies
Last Post
08_UA7_Gr33k
Member Cars for Sale
13
02-11-2016 02:17 PM
08_UA7_Gr33k
Member Cars for Sale
1
09-27-2015 01:56 PM