Tyler's Owdi B5 S4 Build & Update(s) Thread
#1242
Turd Polisher
Thread Starter
iTrader: (1)
Hell, I'd put out if he did that for me.
#1244
Senior Moderator
I'd do the front brakes just to get rid of that stupid light on the dash
#1246
Ex-OEM King
Ah ok, much more wise.
Well if the entire front end is already off, you might as well.
Well if the entire front end is already off, you might as well.
#1247
Turd Polisher
Thread Starter
iTrader: (1)
UPDATE:
Full 3" catless downpipes, midpipes, and all of my maintenance items are on the way.
Only piece of the puzzle I need now is the AEM wideband and fluids!
Most of these items are preventative and expensive as hell - I only go OEM on parts that are absolutely critical (Like the Rear Main Seal ... $134 fucking dollars)
I want the car as reliable as a 16 year old German car can be, very few corners will be cut
Full 3" catless downpipes, midpipes, and all of my maintenance items are on the way.
Only piece of the puzzle I need now is the AEM wideband and fluids!
Most of these items are preventative and expensive as hell - I only go OEM on parts that are absolutely critical (Like the Rear Main Seal ... $134 fucking dollars)
I want the car as reliable as a 16 year old German car can be, very few corners will be cut
Last edited by TylerT; 09-20-2017 at 11:16 AM.
#1248
Turd Polisher
Thread Starter
iTrader: (1)
#1249
Senior Moderator
I'm just here for the Excel pron
The following users liked this post:
TylerT (09-20-2017)
#1250
Your Friendly Canadian
Join Date: Dec 2007
Location: Toronto, Ontario
Age: 32
Posts: 17,433
Received 1,492 Likes
on
1,050 Posts
Well, you also got married. That's an update!
The following users liked this post:
TylerT (09-20-2017)
The following users liked this post:
TylerT (09-20-2017)
#1252
Turd Polisher
Thread Starter
iTrader: (1)
Oh, right
Yup - I'm officially married as of 9/3. Easily the best weekend of my life and a few forum members here actually made it.
Love you guys
Yup - I'm officially married as of 9/3. Easily the best weekend of my life and a few forum members here actually made it.
Love you guys
The following users liked this post:
Aman (09-20-2017)
#1254
In the Mid-South meow
iTrader: (2)
#1255
Senior Moderator
#1256
Turd Polisher
Thread Starter
iTrader: (1)
UPDATE:
All items necessary for the motor pull have been ordered
Downpipes have been shipped, expecting delivery early next week.
Slave Cylinder, Rear Main Seal, Valve Cover gaskets, RTV gasket maker should arrive this week.
New additions on their way:
1 x USP Braided Slave Cylinder Line
4 x QTs of DOT4 fluid for brake & clutch
1 x Gallon of G13 fluid, distilled water will be picked up from the store
7 x QTs of 5W40 w/ new oil filter and crush washer
I am expecting the motor to be out of the car in the next 2 - 3 weeks depending on the availability of some friends.
Very very very excited guys, a lot of money / research / time has gone into this and I feel it's starting to become a reality now.
Stay tuned.
All items necessary for the motor pull have been ordered
Downpipes have been shipped, expecting delivery early next week.
Slave Cylinder, Rear Main Seal, Valve Cover gaskets, RTV gasket maker should arrive this week.
New additions on their way:
1 x USP Braided Slave Cylinder Line
4 x QTs of DOT4 fluid for brake & clutch
1 x Gallon of G13 fluid, distilled water will be picked up from the store
7 x QTs of 5W40 w/ new oil filter and crush washer
I am expecting the motor to be out of the car in the next 2 - 3 weeks depending on the availability of some friends.
Very very very excited guys, a lot of money / research / time has gone into this and I feel it's starting to become a reality now.
Stay tuned.
#1258
Senior Moderator
Originally Posted by Flipster23
He didn't invite you? What an asshole!
Give him some ofyour that Dot 4 fluid he is looking for...
Give him some of
#1259
I drive a Subata.
iTrader: (1)
Crazy plans. Can't wait to see this thing all hooked up. Maybe it'll finally be able to edge out my Miata from dig to 100.
The following users liked this post:
TylerT (09-26-2017)
#1260
Turd Polisher
Thread Starter
iTrader: (1)
#1261
Senior Moderator
#1262
Turd Polisher
Thread Starter
iTrader: (1)
Maybe a towtruck vs Miata would be a closer race?!
The following users liked this post:
JS + XES (09-26-2017)
#1263
I drive a Subata.
iTrader: (1)
Pretty sure shopping cart pushed by Bolt would be faster than Miata
#1264
Your Friendly Canadian
Join Date: Dec 2007
Location: Toronto, Ontario
Age: 32
Posts: 17,433
Received 1,492 Likes
on
1,050 Posts
Motor pull! That sounds like it's gonna be a blast and a great learning experience.
#1265
Turd Polisher
Thread Starter
iTrader: (1)
I'm looking forward to it for sure.
I'm shopping around for engine hoists ... thinking of going the HarborFreight option since I have a 20% off coupon.
I'm shopping around for engine hoists ... thinking of going the HarborFreight option since I have a 20% off coupon.
#1266
Senior Moderator
Yeah.. for something like an engine hoist, HF is a good bet me thinks.
#1267
Turd Polisher
Thread Starter
iTrader: (1)
https://www.harborfreight.com/1-ton-...ane-61858.html
I'm picking this one up.
I was trying to snag one yesterday off Craigslist but it sold on the day I was supposed to pick it up. Bummer.
I'm picking this one up.
I was trying to snag one yesterday off Craigslist but it sold on the day I was supposed to pick it up. Bummer.
#1268
Moderator
^ Waiting for pics of said hoist in the S2k....
#1269
Senior Moderator
#1270
Turd Polisher
Thread Starter
iTrader: (1)
I'm sure it could fit ... possibly ... - makes any errand that involves hauling pretty interesting
Lucky enough, we recently picked up a '99 Tacoma single cab with a campershell that my wife daily drives ... cool little truck
lol.
Lucky enough, we recently picked up a '99 Tacoma single cab with a campershell that my wife daily drives ... cool little truck
lol.
The following users liked this post:
rockstar143 (09-29-2017)
#1272
Turd Polisher
Thread Starter
iTrader: (1)
Last piece of the puzzle arrived yesterday.
3" catless downpipes w/ v-band clamps. Box came to my door as if it was drop kicked the whole way, luckily the exhaust didn't get damaged
New slave cylinder, USP motorsports stainless steel line, OEM driverside valve cover gasket set, OEM rear main seal, RTV gasket maker:
Motor pull is scheduled for the 21st!
This weekend, I will be heading up to Big Bear Lakes, CA for a car show called Occupy Big Bear .. got my headlights polished up and detailed the car on Sunday.
Should be a good month for ETH FO updates.
3" catless downpipes w/ v-band clamps. Box came to my door as if it was drop kicked the whole way, luckily the exhaust didn't get damaged
New slave cylinder, USP motorsports stainless steel line, OEM driverside valve cover gasket set, OEM rear main seal, RTV gasket maker:
Motor pull is scheduled for the 21st!
This weekend, I will be heading up to Big Bear Lakes, CA for a car show called Occupy Big Bear .. got my headlights polished up and detailed the car on Sunday.
Should be a good month for ETH FO updates.
The following users liked this post:
00TL-P3.2 (10-03-2017)
#1273
Senior Moderator
Headlights look much better!!!!
Also was it delivered by United Package Smashers ?
Also was it delivered by United Package Smashers ?
The following users liked this post:
TylerT (10-03-2017)
The following users liked this post:
TylerT (10-03-2017)
#1275
Turd Polisher
Thread Starter
iTrader: (1)
For some odd reason .. there were some heavy duty caster wheels shuved in there too - wtf?
I love you!
The following users liked this post:
rockstar143 (10-04-2017)
#1277
Turd Polisher
Thread Starter
iTrader: (1)
A few weeks ago, I put 750 miles on the ETH FO in 3 days - I drove from San Diego to Bakersfield to visit a clients office, to Big Bear for a Euro festival, and back to San Diego .. 750 miles and didn't skip a beat.
I got a speeding ticket a month back ... believe me, I really wanted to do a few pulls down this road but I ultimately had some self control
In this case ... it wasn't speeding
Overall, really pleased with this car.
I am beginning the process of pulling the motor tomorrow, the engine comes out on Saturday
Battle station is just about ready - I need a new radiator and the engine hoist is being picked up tomorrow after work.
I got a speeding ticket a month back ... believe me, I really wanted to do a few pulls down this road but I ultimately had some self control
In this case ... it wasn't speeding
Overall, really pleased with this car.
I am beginning the process of pulling the motor tomorrow, the engine comes out on Saturday
Battle station is just about ready - I need a new radiator and the engine hoist is being picked up tomorrow after work.
The following 2 users liked this post by TylerT:
Predatorbird (10-17-2017),
teh CL (10-18-2017)
#1278
Turd Polisher
Thread Starter
iTrader: (1)
Current parts installation list:
XS Power 85mm Intake w/ Filter
3" Forge Miltek Exhaust
Walbro 450 w/ Gaskets & Install kit
Frankenturbo F21s K04 Turbos
Resurfaced OEM Dual Mass
New Upgraded PCV Spider Hose
APR Bi-Pipe
3" XS Power w/ Midpipes w/ titantium / fiberglass heatwrap
EV14 750CC
Clutchmasters FX400
Upgraded USP Slave Cylinder braided line
All new fluids.
Should be a fun next couple weeks.
XS Power 85mm Intake w/ Filter
3" Forge Miltek Exhaust
Walbro 450 w/ Gaskets & Install kit
Frankenturbo F21s K04 Turbos
Resurfaced OEM Dual Mass
New Upgraded PCV Spider Hose
APR Bi-Pipe
3" XS Power w/ Midpipes w/ titantium / fiberglass heatwrap
EV14 750CC
Clutchmasters FX400
Upgraded USP Slave Cylinder braided line
All new fluids.
Should be a fun next couple weeks.
The following users liked this post:
teh CL (10-18-2017)
#1279
Ex-OEM King
Good luck dude! Here's to hoping you don't have any screws left over when you're done.
The following users liked this post:
TylerT (10-17-2017)
#1280
Turd Polisher
Thread Starter
iTrader: (1)
That's why there's Sharpie pens & ziplock bags!