rockstar143's 2013 CTS-V SUV Wagon Thread - GM Owner & Cut Springs
#3841
Senior Moderator
#3842
Chapter Leader (Southern Region)
Poor V..
J.. you ever see those custom fog mods?
#3843
Brian says he's NEVER seen such bad rock chips...worst OEM paint ever on a car that can go that fast!
oh whale. It'll be fixed now...
inquired on getting the chrome painted to match while it's off car, but Acura wants my car gone because they are behind.
Might keep asking...
oh whale. It'll be fixed now...
inquired on getting the chrome painted to match while it's off car, but Acura wants my car gone because they are behind.
Might keep asking...
#3844
Chapter Leader (Southern Region)
really.. because I cleaned up the dirty slut last week..
I had rock dings that notched the platic, but didn't damage the paint.
paint is actually pretty good..
I had rock dings that notched the platic, but didn't damage the paint.
paint is actually pretty good..
#3845
Chapter Leader (Southern Region)
Here's the one I like.. D3 makes a kit but it's 400 I think.. bleh.
Thinking of doing something custom.
Maybe with switchbacks.. I saw someone wire it that way so when he hit the hazards the LEDs flashed orange.
Thinking of doing something custom.
Maybe with switchbacks.. I saw someone wire it that way so when he hit the hazards the LEDs flashed orange.
#3846
Chapter Leader (Southern Region)
Just tryna spend more of yo money playa!
#3849
Suzuka Master
iTrader: (1)
#3850
Senior Moderator
Clear bra.?
#3851
Chapter Leader (Southern Region)
I bet you'd like that pervert!
The following 2 users liked this post by Majofo:
KaMLuNg (05-09-2017),
rockstar143 (05-08-2017)
#3853
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Join Date: Dec 2003
Location: Mooresville, NC
Age: 37
Posts: 43,472
Received 3,657 Likes
on
2,491 Posts
#3854
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Join Date: Dec 2003
Location: Mooresville, NC
Age: 37
Posts: 43,472
Received 3,657 Likes
on
2,491 Posts
I really like these but wish there was a way to do something custom and put the lights on the other side of the opening so they lined up with the bar on the headlight so it kind of looked like the current gen caddis.
#3855
Moderator
Join Date: Aug 2014
Location: Dirty H-Town, Amerikkka
Posts: 28,432
Received 7,772 Likes
on
5,045 Posts
#3856
Senior Moderator
#custom #l33t #leds
#3857
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Join Date: Dec 2003
Location: Mooresville, NC
Age: 37
Posts: 43,472
Received 3,657 Likes
on
2,491 Posts
The following users liked this post:
JT4 (05-18-2017)
The following users liked this post:
rockstar143 (05-17-2017)
#3861
and
Thanks Andrew...great advice.
For sure, man...I have to make sure that's the case.
by https://www.flickr.com/photos/rockstar143/, on Flickr
by https://www.flickr.com/photos/rockstar143/, on Flickr
by https://www.flickr.com/photos/rockstar143/, on Flickr
by https://www.flickr.com/photos/rockstar143/, on Flickr
by https://www.flickr.com/photos/rockstar143/, on Flickr
by https://www.flickr.com/photos/rockstar143/, on Flickr
by https://www.flickr.com/photos/rockstar143/, on Flickr
by https://www.flickr.com/photos/rockstar143/, on Flickr
by https://www.flickr.com/photos/rockstar143/, on Flickr
by https://www.flickr.com/photos/rockstar143/, on Flickr
Thanks Andrew...great advice.
For sure, man...I have to make sure that's the case.
The following 4 users liked this post by rockstar143:
#3862
Chapter Leader (Southern Region)
looks great mang..
Oh Z..
Oh Z..
The following users liked this post:
rockstar143 (05-18-2017)
#3864
I can now confirm for you for sure that the curt 11013 DOES fit on the wagon.
Install wasn't hard...took an hour and a half because I took my time and wasn't clear on some of the instructions.
I did have to muscle the shit out of the exhaust to get access to dremel the outer rail opening to fit the hardware through...and to get the hitch receiver in there.
Eureka, and it looks clean!
jacked that bitch up
there she is
here's how you thread the fish wire contraption onto the bolts...they include 2 knowing you might mess one up
don't have a pivoting torque wrench but I'm confident I got more than the required 70 ft/lb on the bolts
Also, make note...I have corsa touring mufflers...OEM exhaust mufflers might be bigger
Install wasn't hard...took an hour and a half because I took my time and wasn't clear on some of the instructions.
I did have to muscle the shit out of the exhaust to get access to dremel the outer rail opening to fit the hardware through...and to get the hitch receiver in there.
Eureka, and it looks clean!
jacked that bitch up
there she is
here's how you thread the fish wire contraption onto the bolts...they include 2 knowing you might mess one up
don't have a pivoting torque wrench but I'm confident I got more than the required 70 ft/lb on the bolts
Also, make note...I have corsa touring mufflers...OEM exhaust mufflers might be bigger
#3865
Moderator
Join Date: Aug 2014
Location: Dirty H-Town, Amerikkka
Posts: 28,432
Received 7,772 Likes
on
5,045 Posts
Now you can pull a little trailer full of garbage to the dump. At 130 mph.
And get there with nothing left in the trailer. No need to pay to dump anymore. Success.jpg
And get there with nothing left in the trailer. No need to pay to dump anymore. Success.jpg
#3867
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Join Date: Dec 2003
Location: Mooresville, NC
Age: 37
Posts: 43,472
Received 3,657 Likes
on
2,491 Posts
Awesome. Looks good. Wonder if I could fit that with my exhaust. The more utility we can get out of this wagon the cooler it makes it to me.
#3869
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Join Date: Dec 2003
Location: Mooresville, NC
Age: 37
Posts: 43,472
Received 3,657 Likes
on
2,491 Posts
It would be cool to do that. I want to see if I can get a lightweight scooter mount and take a honda ruckus on the back to ride around at car shows. Going to the hardware store to with a small trailer and bringing home a trailer full of mulch with a vwagon would be awesome too.
#3870
Chapter Leader (Southern Region)
holy balls.. get some balls to hang on that thing stat
#3872
Chapter Leader (Southern Region)
Added weight to the rear always helps
$5 says J jackknifes the small trailer
Rear quarter panel body work coming soon....
$5 says J jackknifes the small trailer
Rear quarter panel body work coming soon....
#3873
LOL...I did add about 40 pound with that hitch...plus bikes.
and now I'm back to having a way to bring my christmas tree home
now, to modify the rsx to tl to s2000 hitch receiver i have...then i can sell the saris bones and just have the hitch mount yakima again.
and now I'm back to having a way to bring my christmas tree home
now, to modify the rsx to tl to s2000 hitch receiver i have...then i can sell the saris bones and just have the hitch mount yakima again.
#3874
Senior Moderator
Originally Posted by Majofo
Added weight to the rear always helps
$5 says J jackknifes the small trailer
Rear quarter panel body work coming soon....
$5 says J jackknifes the small trailer
Rear quarter panel body work coming soon....
#3875
Senior Moderator
unicorn
#3876
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Join Date: Dec 2003
Location: Mooresville, NC
Age: 37
Posts: 43,472
Received 3,657 Likes
on
2,491 Posts
Dang didn't think about how much the hitch would weight. I would be rubbing all the time then.
#3877
Suzuka Master
iTrader: (1)
Cadillac Repair & Service Manual – Choose Your Vehicle (Instant Access)$29.99.
Access Period to your selected manual is 1-Year. You will also be able to print out any parts of the manual you wish to.
https://www.repairmanuals.co/product...FciCswodp2AP2w
The following users liked this post:
zeta (05-18-2017)
#3879
Turd Polisher
iTrader: (1)
J, you're important to me.
The following users liked this post:
rockstar143 (05-18-2017)