Quanaman's Accord Love Thread (Accord starts on Pg 18)
#162
Race Director
iTrader: (8)
small world
#165
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
^^^^ Pictures or it didn't happen......
#166
Race Director
iTrader: (8)
Agreed, should of snapped a pic
#167
Ah! I walked around the parking lot a bit and even ran into a couple buddies from Pohanka. The new 2016 Accord looked pretty sweet! I did end up having the car aligned. They did a good job and I got to sneak back there for a bit to watch! That Honda dealer is so nice & brand new!!
I got you guys! This in ground lift was fucking beautiful!
The following users liked this post:
Slpr04UA6 (09-14-2015)
#172
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
Quan, you need one of those in-ground lifts at your place!
#173
Instructor
Glad to hear it Quan, thanks for your business. Our alignment rack is gaining popularity from our clients with lowered vehicles and those in general that prefer that type of lift. Again, thanks!
-greg
-greg
#174
Yup! I sure loved it. I'll definitely be back for another alignment when I need one! Plus the service adviser hooked me up
The car is still floating on 4 jack stands at the moment, haven't had time this week with work and everything else to finish it up. Thank god for beater cars.
I got the aspec side skirts and rear lip installed. Also installed the Jpipe so I'm pretty damn satisfied with myself. It only took me 2 different jpipes and two different TLs to finally sack up and install one myself I was pretty satisfied and it wasn't all that bad, especially after installing the rear exhaust a few weeks back.
All in all, I think I've only paid for labor on this car for a handful of things. Rolling fenders, alignment, PDR, I think that's about it. I'm pretty damn proud of myself
Pics tomorrow, I promise guys.
The car is still floating on 4 jack stands at the moment, haven't had time this week with work and everything else to finish it up. Thank god for beater cars.
I got the aspec side skirts and rear lip installed. Also installed the Jpipe so I'm pretty damn satisfied with myself. It only took me 2 different jpipes and two different TLs to finally sack up and install one myself I was pretty satisfied and it wasn't all that bad, especially after installing the rear exhaust a few weeks back.
All in all, I think I've only paid for labor on this car for a handful of things. Rolling fenders, alignment, PDR, I think that's about it. I'm pretty damn proud of myself
Pics tomorrow, I promise guys.
#176
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
I'd like to see some pictures!
#179
Pics as promised. Finally got the car on the ground this morning before work. So far, no rasp.
ATLP+Aspec =love... although the exhaust does appear to need some adjustment. That 1/4" on the right side is killing me already.
Last edited by quanaman; 09-19-2015 at 08:46 AM.
#181
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
^^^^ +1
The following users liked this post:
Slpr04UA6 (09-27-2015)
#190
Pro
I was thinking getting OEM all weathers but I just love the look of the regular carpets. I'm usually the only one in the car anyways & keep my shoes pretty clean getting in & out
#191
Well on my previous TLs, I always had both carpet as well as all weather ones. If I come across a set of the all weather ones again I'd probably pick them up and throw them in for the winter. Hopefully we don't get snow for another couple of months at least though
If I don't come across another set I honestly don't care too much, I really love and prefer the look of carpet mats, especially when they're new. It just makes the whole car feel cleaner inside. I got really lucky on this set since I got them as part of a trade with some other parts. I held off on putting them in for a while but I installed my CT short shifter this weekend and vacuumed the car so I decided to throw them in. Love it!!
If I don't come across another set I honestly don't care too much, I really love and prefer the look of carpet mats, especially when they're new. It just makes the whole car feel cleaner inside. I got really lucky on this set since I got them as part of a trade with some other parts. I held off on putting them in for a while but I installed my CT short shifter this weekend and vacuumed the car so I decided to throw them in. Love it!!
#192
Moderator
Chapter Leader (South Florida Region)
Chapter Leader (South Florida Region)
iTrader: (6)
I'm all weather all the time...I haven't spent an hour trying vacuum the last grain of sand in years...
B's SRX, S2000 AND the TL are all weather. Initially, I did think it looked too rugged for a high end car, but I've grown to love the look.
B's SRX, S2000 AND the TL are all weather. Initially, I did think it looked too rugged for a high end car, but I've grown to love the look.
#193
Pro
if you ever want to go back to carpets, what I do is wack the carpets against the ground and brush the carpet so all the crap is loosened up & ready to be vac'd. If you have access to compressed air that works too but from a safe distance or else you get weird marks that take forever to remove
#194
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
New floormats always renew your excitement for the car.
#195
I guess another reason why I dont care for the all weather ones is because every other time the TL was my daily driver. I daily it a lot even now, but I have a beater gas saver that I drive a lot of times. If any snow hits, the TL will be parked
if you ever want to go back to carpets, what I do is wack the carpets against the ground and brush the carpet so all the crap is loosened up & ready to be vac'd. If you have access to compressed air that works too but from a safe distance or else you get weird marks that take forever to remove
Yup! I always smack them against a pole or other hard object to get rid of a lot of the loose dirt/dust.
#196
Also, I lowered the front end another 1/4 inch in an effort to get a more even drop.
Centered the front license plate for now as well. Can't say how long it'll stay but it's growing on me. Before sparking the rho plate debate, I still love the RHO plate but am also loving this new found symmetry to the front end
In all seriousness I'm tyying to decide what to do about the bumper. Either I will repaint and install my aspec kit since it has some scratches, or leave it as is for now until the spring, then repaint and add aspec lip.
Or lastly, do something different, maybe even custom.
Centered the front license plate for now as well. Can't say how long it'll stay but it's growing on me. Before sparking the rho plate debate, I still love the RHO plate but am also loving this new found symmetry to the front end
In all seriousness I'm tyying to decide what to do about the bumper. Either I will repaint and install my aspec kit since it has some scratches, or leave it as is for now until the spring, then repaint and add aspec lip.
Or lastly, do something different, maybe even custom.
#197
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
Aspec
The following users liked this post:
Steven Bell (10-02-2015)
#199
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
"Little money" meaning zero money......
The following users liked this post:
rockstar143 (10-03-2015)