tommyguy2

4th gear pull

http://www.my350z.com/forum/showthre...hlight=HR+dyno

not too shabby! this guy ran 13.6 @ 104mph w/ 2.22 60'! this is the kind of power the VQ shouldda had from the beginning if you ask me. In your face 335I

runnerX

I am sorry but 335i dynos at 278whp and 288lb-ft of torque stock, which is more than that 07 6spd Z can put down

http://forums.bimmerforums.com/forum...highlight=dyno


and how about 375lb-ft and 345whp with just exhaust and ECU upgrade?

http://www.e90post.com/forums/showthread.php?t=43252

minkl81

iTrader: (2)

twin turbo vs. na

runnerX

if that is the case, then 350z should compare with E46 M3. Both use na engine but 350z's is about 0.3 larger by volume (3.5 liter vs 3.2 liter M3) yet still makes less power.

A stock E46 M3 puts down 278.2whp and 235.3wtq. vs larger Z engine at 264.8 hp and 231 tq

http://www.turnermotorsport.com/imag...dyno_s54m3.jpg

F23A4

....unlike the S54, the likelihood of engine failure in the Z is likely minimal. Z output looks good.

pimpin-tl

Not too much more than my G35 did. I had a 05 G35 it dynoed stock 253 hp and 231 TQ. With a few bolt ons, 255 hp and 245 tq.

FastAcura

I have no idea how you can compare a 335i to a 350Z. Someone shopping for a 335i will not cross shop these two.

CLpower

300 HP car vs 300 HP car