SOLD - FS: Tein Basic Coilover for 04-05 TL
08-23-2005, 03:44 AM
#1
SOLD - FS: Tein Basic Coilover for 04-05 TL
I'm selling my Tein Basic Coilover from my 05 TL because I might have to sell the car. The suspension was installed on May 16 and removed last night. I put roughly 2100 miles on them. The car has 4500 today. The car is not a daily driver, so that explains the low mileage.
They are in excellent condition, no leaks whatsoever, no scratches on the shock rods, no damages on the body or threads. Everything will be included, adjustment wrenches, boots, bump stops, top aluminum spring seats (front), even installation manual, original box and all the cartons inside.
Pictures will follow. I prefer to sell this set locally in Socal but can ship at buyer's expense. The box is a little heavy so shipping can be expensive.
Asking price is $575 OBO. PM me here or send me an email at h7479gh at hotmail dot com.
They are in excellent condition, no leaks whatsoever, no scratches on the shock rods, no damages on the body or threads. Everything will be included, adjustment wrenches, boots, bump stops, top aluminum spring seats (front), even installation manual, original box and all the cartons inside.
Pictures will follow. I prefer to sell this set locally in Socal but can ship at buyer's expense. The box is a little heavy so shipping can be expensive.
Asking price is $575 OBO. PM me here or send me an email at h7479gh at hotmail dot com.
08-25-2005, 12:14 AM
#4
Columbia Univ. c/o 2004
Join Date: May 2005
Location: CA
Age: 43
Posts: 266
Likes: 0
Received 0 Likes
on
0 Posts
I'm local and also interested. Any chance you have pictures of the coilovers installed on your car. I need a visual idea as to how far the drop is.
Upload pics or email them to me at design.blood@gmail.com
Thanks.
Upload pics or email them to me at design.blood@gmail.com
Thanks.
08-25-2005, 12:36 AM
#5
Intermediate
Join Date: Aug 2005
Location: bergen county
Age: 44
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
will it fit 2003 TL type S? i m interest..email me oxsupramanxo@yahoo.com
08-25-2005, 12:50 AM
#6
architectonic:
Go to this thread to see pics of my car with the suspension on and go to post #9: https://acurazine.com/forums/showthread.php?t=115378
Originally, the distance between the center hub and the fender lip was 15" (F) and 14.5" (R). Initially, setting the spring seats as specified by Tein (1" from the bottom of the threads) reduced the distance to 13" (F) and 12.75" (R). This is the setting on the pics. I then raised them to about 13.25" all around. The car rides better after it was raised.
03blackS:
I don't think they would fit 2nd gen TL, though.
Go to this thread to see pics of my car with the suspension on and go to post #9: https://acurazine.com/forums/showthread.php?t=115378
Originally, the distance between the center hub and the fender lip was 15" (F) and 14.5" (R). Initially, setting the spring seats as specified by Tein (1" from the bottom of the threads) reduced the distance to 13" (F) and 12.75" (R). This is the setting on the pics. I then raised them to about 13.25" all around. The car rides better after it was raised.
03blackS:
I don't think they would fit 2nd gen TL, though.
Last edited by 260 HP; 08-25-2005 at 12:55 AM.
08-25-2005, 01:05 AM
#7
Photos of the actual set, taken this evening (8/24) at 10 PM:
As seen in the pictures, the set is in almost brand new condition. The car hasn't seen rain at all, so it's still squeaky clean under there. There's almost no scratches anywhere, except on the part that was pinched by the front pinch forks. You don't need to use spring compressor, there's not a scratch on the springs, either. I have adjusted the height only ONCE in their life, so there's minimal surface scratch on the spring seats, but that's it.
I've cleaned up the threads from dirt, so it's ready for install.
As seen in the pictures, the set is in almost brand new condition. The car hasn't seen rain at all, so it's still squeaky clean under there. There's almost no scratches anywhere, except on the part that was pinched by the front pinch forks. You don't need to use spring compressor, there's not a scratch on the springs, either. I have adjusted the height only ONCE in their life, so there's minimal surface scratch on the spring seats, but that's it.
I've cleaned up the threads from dirt, so it's ready for install.
Trending Topics
09-01-2005, 04:26 AM
#13
Instructor
Join Date: Jan 2004
Location: Maryland
Age: 53
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
I'll will buy them, if you ship them C.O.D. 
PM me, I am a serious buyer.
PM me, I am a serious buyer.
09-02-2005, 10:59 AM
#15
comptech
Join Date: Feb 2005
Location: G-burg, Md
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
Hi there,
woud it fit 2003 acura cls? Let me know, thanks.
woud it fit 2003 acura cls? Let me know, thanks.
09-08-2005, 04:19 PM
#21
Intermediate
Join Date: Aug 2004
Location: Columbia, Maryland
Age: 46
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Do you still have the coilovers? If so, what are you wanting for them and will you ship them to Md.?
Thread
Thread Starter
Forum
Replies
Last Post
MrHeeltoe
1G TSX Tires, Wheels, & Suspension
20
02-23-2023 01:54 PM
ITSJESTER
4G TL Audio, Bluetooth, Electronics & Navigation
17
12-06-2018 02:29 AM
MrHeeltoe
2G TSX Tires, Wheels & Suspension
3
09-29-2015 10:43 PM
MrHeeltoe
3G TL Tires, Wheels & Suspension
0
09-28-2015 05:43 PM
