SumkidwithaCL

...Everything must go!

Enkei Inazuma 17's with Toyo tires that need to be replaced -$450

Suspension Techniques 1" drop springs -$110

Suspension Techniques 1.5" drop springs (95-97 Acc. V6) -$130 -still in box

Sprint 2.5" drop springs -$80

Apexi WS cat-back -$375 (have origional box)

APC polished short-ram intake -$35

APC polished front upper strut bar -$20

MSD distributor & coil -$60

TYC G3 S-type tail lights, clear lens -$120

B&M Short Shift adapter -$50

Autometer A/F ratio and Volt Gauges in dual pod -$100

Also, check out my "For Sale" page for OEM Honda/Acura parts.

If you're interested in anything, feel free to email me at Sumkidwithacl@aol.com or post a reply here.

97AcuraCL

how much would you sell your 6x9's for?? (i know its not on the list i jus figured i'd ask)

SumkidwithaCL

Sorry, I already upgraded the stock speakers in my moms car with them... so they are kinda "taken" ...and the rest of the audio equipment is gonna go in my next car, with the exception of the amps which are already gone.

Anyone else want anything?? It all has to go!

SumkidwithaCL

^^^

Rob_Marciano

Are those(1.5" drop,$130) good quality springs?
How did the ride feel?

d5c5b

the msd ign, and coil sounds interesting.....do you have everything to hook it up? Can you send me pics too? ttyl

SumkidwithaCL

I honestly dont know what the ride of the 1.5" drop springs is like, they have never been installed... they are for 95-97 Accord V6's... or any 97-99 CL... I have the same springs on my car, but only a 1" drop, and I love the ride... pretty similar to a 6th gen Civic SI. Suspension Techniques makes excelent products.

Someone was interested in the cap and coil... but I havent heard from them in a while... i'm assuming they dont want them anymore... but I will contact them again and see, if they dont want them i'll let you know. Its not a complete ignition... just the MSD distributor with the power post, and an external MSD coil.

97Acura3.0CL

how old and which ones? the af and voltage right?

100 shipped? im interested let me know asap.

97Acura3.0CL

also the msd and coil, 60? will it fit the 97 3.0? 60 shipped?

SumkidwithaCL

the cap is for the 4cyl only. the coil is universal, but I had no luck getting an aftermarket coil to work on a 3.0.

The gauges are like 2 months old... they are the Autometer Phantom gauges... white faces with black trim.

$100 shipped is fine with me.

d5c5b

im not too familiar with the ignition side of the engine....whats the benefit of owning the ign. and coil? Still interested.....

Rob_Marciano

Is that $130 set in stone?
I'd like to talk about the price with you. Don't worry I'm not going to try and screw you on the price.

SumkidwithaCL

D5c5b- the coil puts out roughly 40,000 volts, as compared to the stock coil which runs at about 10-15,000. It makes for a more complete burn of the fuel, which actually gives you a little better gas mileage, less carbon out the exhaust (cleaner tip(s) and better for the environment) and you gain a couple HP. The distributor cap is a little beefed up from the stock one, and it has the external coil input (whereas the stock coil is mounted inside the distributor) These are also needed if you were to add an aftermarket ignition module.

Rob- no, that price is not totally set in stone... they are my brothers springs that he was gonna use on his CL, so I have to see what he wants.