SOLD: RV6 High Flow Precats HFPC New and Used
09-15-2015, 12:12 PM
#1
Three Wheelin'
Thread Starter
iTrader: (1)
RV6 High Flow Precats HFPC New and Used
Category: Accessories
Price: $400
Private or Vendor Listing: Private Listing
Part Fits (you may select multiples): TL 3G
Location (State/Prov/Terr): CA
Item Condition: Used
Now I only used one of the two (front) and have driven maybe around 10K miles on it. So the other one is brand new. What is NOT included are the mounting accessories. You can probably get them from RV6.
Here is a picture from his site for reference. Ask him for all the material that is NOT the HFPC, so those mounting screws, those plates and those threads. You can also just get some anti-cease grease from any hardware store, or maybe he will throw it in for free.
Again, selling a half new half used HFPC set without the mounting accessories.
They work perfectly and the gains are noticeable.
PM me if interested! Happy shopping
09-15-2015, 03:54 PM
#3
Three Wheelin'
Thread Starter
iTrader: (1)
For those who cannot see the pics I uploaded above, here they are embedded
And here is the link to RV6's HFPC. Again, you will need to ask him for the mounting accessories pictured there:
https://rv6-p.com/tl/3rd-gen/v3hfpc-225.html
And here is the link to RV6's HFPC. Again, you will need to ask him for the mounting accessories pictured there:
https://rv6-p.com/tl/3rd-gen/v3hfpc-225.html
09-15-2015, 05:33 PM
#5
One for front one for rear, it's a set.
Better question is why the OP never installed both.
The rear wasn't that hard to get to. Took mine in/out over the top of the middle and rear spark plug / coil.
You'll really just need the gaskets:
GASKET, EX. CHAMBER 18115-RCA-A01 x2 $7.78
--Prices at AcuraOEMParts.com
The large diameter bolt in the RV6 images can be re-used from the older brace for rear HFPC. But, OP should have this as seen in the picture since the rear wasn't installed.
You'll need 8 total of the nuts for tops and 6 for the bottoms, had the specs on those but can't find them at the moment.
You'll need j-pipe gaskets too, unless you're installing a new one at the same time.
Depending on the condition of the threads on precats to j-pipe "bolts" you may be able to re-use these, same as tops of HFPCs to engine.
Mine wasn't rusted bad at all, and I used Acura Rust Penetrate Spray (08700-9219A) with much success.
Better question is why the OP never installed both.
The rear wasn't that hard to get to. Took mine in/out over the top of the middle and rear spark plug / coil.
You'll really just need the gaskets:
GASKET, EX. CHAMBER 18115-RCA-A01 x2 $7.78
--Prices at AcuraOEMParts.com
The large diameter bolt in the RV6 images can be re-used from the older brace for rear HFPC. But, OP should have this as seen in the picture since the rear wasn't installed.
You'll need 8 total of the nuts for tops and 6 for the bottoms, had the specs on those but can't find them at the moment.
You'll need j-pipe gaskets too, unless you're installing a new one at the same time.
Depending on the condition of the threads on precats to j-pipe "bolts" you may be able to re-use these, same as tops of HFPCs to engine.
Mine wasn't rusted bad at all, and I used Acura Rust Penetrate Spray (08700-9219A) with much success.
Last edited by MonkeyTrucker; 09-15-2015 at 05:43 PM.
09-15-2015, 05:58 PM
#6
I like to use this lubricant / anti-seize from Permatex, no metals, a ceramic blend instead, and protects up to 3,000 degrees Fahrenheit.
On Amazon here.
Fair price OP is selling for the HFPCs, nearly $570 new at RV6. So $285 new for the one $185 for the used. About 30% off, not bad.
FYI - My precats looked really good at 120,000 miles, so I wouldn't worry about 10,000 miles on a higher flowing precat.
On Amazon here.
Fair price OP is selling for the HFPCs, nearly $570 new at RV6. So $285 new for the one $185 for the used. About 30% off, not bad.
FYI - My precats looked really good at 120,000 miles, so I wouldn't worry about 10,000 miles on a higher flowing precat.
Trending Topics
09-15-2015, 10:31 PM
#11
For those who cannot see the pics I uploaded above, here they are embedded
And here is the link to RV6's HFPC. Again, you will need to ask him for the mounting accessories pictured there:
https://rv6-p.com/tl/3rd-gen/v3hfpc-225.html
And here is the link to RV6's HFPC. Again, you will need to ask him for the mounting accessories pictured there:
https://rv6-p.com/tl/3rd-gen/v3hfpc-225.html
09-15-2015, 10:33 PM
#12
Safe to assume second pic is his as well, same carpet...lol.
Last edited by MonkeyTrucker; 09-15-2015 at 10:38 PM.
09-16-2015, 12:07 AM
#14
Three Wheelin'
Thread Starter
iTrader: (1)
But anyway, with a few digging around (I moved so I lost a few things)
This is what I found and will be included with my sale
I am currently in negotiations with a buyer, so I will update if that falls through. Thanks everyone
09-16-2015, 12:38 AM
#15
Oooooooo, deal just became awesome.
Somebody should've pulled the trigger earlier
.
GLWS mate! These won't last long now.
Somebody should've pulled the trigger earlier
.GLWS mate! These won't last long now.
Thread
Thread Starter
Forum
Replies
Last Post
MrHeeltoe
1G TSX Tires, Wheels, & Suspension
20
02-23-2023 01:54 PM
MrHeeltoe
2G TSX Tires, Wheels & Suspension
3
09-29-2015 10:43 PM
MrHeeltoe
3G TL Tires, Wheels & Suspension
0
09-28-2015 05:43 PM
