Parting out TL, lots of stuff For Sale
#1
Instructor
Thread Starter
Join Date: Mar 2001
Location: Wharton, NJ
Age: 43
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
Parting out TL, lots of stuff For Sale
Hey guys I am parting out my 2003 TL Type S
I have most of the parts already off the car and have pictures of them.
1. Unorthodox Racing SS 3 piece pulley set used about 15k miles. The steering pulley has some knicks on it from uninstallation, but everything is working just fine. $200/obo
2. Neuspeed front and rear sways 19mm rear and 27mm front. $200/obo
3. Magnaflow custom made axelback mufflers. They have been used about 25k miles. They are a bit dirty and need will require some cleaning work to make them shine again. $180/obo
4. OBX headers used for 25k miles. The downpipe has a dent in it from the car bottoming out and the center pipe of each header has a crack along the welding so would need to be touched up. $135/obo
5. Neuspeed lower tie bar, clears aftermarket headers with a couple of washers on each side which I will provide. $110/obo
Pictures of the above items can be found on: http://www.acurainspired.com/gallery...d=1015&aid=889
6. Wing West body kit that came off my old 2001 TL, will fit 99-03 tl's. Painted Montery Blue Pearl. $500/obo
pics located at: http://www.acurainspired.com/gallery...1752&uuid=1015
7. 18" +45 offset Motegi DP5's in a gunmetal finish with a 2" machined lip. 2 tires are Hankook Ventus 225/40/18 and 2 are Toyo proxy fz4 225/40/18. The hankook tires have about 75% life left. One toyo has about 60% and the other one has alot of wear on the inside. I have a Pirelli PZero Nero tire in the same size that I will throw in to replace the one toyo with. There are no bends in the wheels and one has minor curb rash which I have closeups of. $750/obo
Pics located at: http://www.acurainspired.com/gallery...1749&uuid=1015
8. Tein SS coilovers. I don't have pics of these yet, but will take some in a few days. They were used for about 25k miles. Wrenches not included b/c I lost them. This is a full coilvoer set with shock/strut, and springs. The shocks are 16-way adjustable and the coilovers allow a 4inch drop I believe. $625/obo
9. Unichip with Plug-n-play harness bought from original groupbuy. $400/obo
10. Pioneer AVC-RGB1 navi to video conversion unit. Includes relay, switch, and all wiring neccessary for conversion. $125/obo
I would prefer local sales and will meet up with buyers anywhere between NYC and DC b/c I travel alot between the 2 places. Shipping can be arranged if no local buyers. I don't browse the forums everyday b/c of heavy traveling and will try to check once every other day so Please allow me some time to respond.
Thanks
I have most of the parts already off the car and have pictures of them.
1. Unorthodox Racing SS 3 piece pulley set used about 15k miles. The steering pulley has some knicks on it from uninstallation, but everything is working just fine. $200/obo
2. Neuspeed front and rear sways 19mm rear and 27mm front. $200/obo
3. Magnaflow custom made axelback mufflers. They have been used about 25k miles. They are a bit dirty and need will require some cleaning work to make them shine again. $180/obo
4. OBX headers used for 25k miles. The downpipe has a dent in it from the car bottoming out and the center pipe of each header has a crack along the welding so would need to be touched up. $135/obo
5. Neuspeed lower tie bar, clears aftermarket headers with a couple of washers on each side which I will provide. $110/obo
Pictures of the above items can be found on: http://www.acurainspired.com/gallery...d=1015&aid=889
6. Wing West body kit that came off my old 2001 TL, will fit 99-03 tl's. Painted Montery Blue Pearl. $500/obo
pics located at: http://www.acurainspired.com/gallery...1752&uuid=1015
7. 18" +45 offset Motegi DP5's in a gunmetal finish with a 2" machined lip. 2 tires are Hankook Ventus 225/40/18 and 2 are Toyo proxy fz4 225/40/18. The hankook tires have about 75% life left. One toyo has about 60% and the other one has alot of wear on the inside. I have a Pirelli PZero Nero tire in the same size that I will throw in to replace the one toyo with. There are no bends in the wheels and one has minor curb rash which I have closeups of. $750/obo
Pics located at: http://www.acurainspired.com/gallery...1749&uuid=1015
8. Tein SS coilovers. I don't have pics of these yet, but will take some in a few days. They were used for about 25k miles. Wrenches not included b/c I lost them. This is a full coilvoer set with shock/strut, and springs. The shocks are 16-way adjustable and the coilovers allow a 4inch drop I believe. $625/obo
9. Unichip with Plug-n-play harness bought from original groupbuy. $400/obo
10. Pioneer AVC-RGB1 navi to video conversion unit. Includes relay, switch, and all wiring neccessary for conversion. $125/obo
I would prefer local sales and will meet up with buyers anywhere between NYC and DC b/c I travel alot between the 2 places. Shipping can be arranged if no local buyers. I don't browse the forums everyday b/c of heavy traveling and will try to check once every other day so Please allow me some time to respond.
Thanks
Last edited by ChinozTL; 06-12-2005 at 02:32 PM.
![ChinozTL is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#3
Interested in 5. Neuspeed lower tie bar, clears aftermarket headers with a couple of washers on each side which I will provide.
and I am from NYC. I dont think that i saw pics of this item... front lower tie bar? or rear?
and I am from NYC. I dont think that i saw pics of this item... front lower tie bar? or rear?
![Bxscig is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#4
distinctiv_tuning
Join Date: Dec 2003
Location: Union City, CA ...Bay Area
Age: 39
Posts: 386
Likes: 0
Received 0 Likes
on
0 Posts
dibs on sways...do they fit 2000 TL-p?
![veen120 is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#7
Audio Enthusiast
Join Date: Jun 2005
Location: SoCal
Posts: 329
Likes: 0
Received 0 Likes
on
0 Posts
I'm interested in your Tein's as well.
![Jputt is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
Trending Topics
#8
Racer
Join Date: Oct 2002
Location: South Philly
Age: 38
Posts: 458
Likes: 0
Received 0 Likes
on
0 Posts
I am interested in the NEUSPEED lower tie bar if the Bxscig doesn't get it.
![JimmyTLS is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#11
Instructor
Thread Starter
Join Date: Mar 2001
Location: Wharton, NJ
Age: 43
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Bxscig
Interested in 5. Neuspeed lower tie bar, clears aftermarket headers with a couple of washers on each side which I will provide.
and I am from NYC. I dont think that i saw pics of this item... front lower tie bar? or rear?
and I am from NYC. I dont think that i saw pics of this item... front lower tie bar? or rear?
![ChinozTL is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#12
Instructor
Thread Starter
Join Date: Mar 2001
Location: Wharton, NJ
Age: 43
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by umcp
is the neuspeed upper tie bar, that's pictured on page 2, for sale?
![ChinozTL is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#13
Instructor
Thread Starter
Join Date: Mar 2001
Location: Wharton, NJ
Age: 43
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
I would rather sell the WW kit as a whole, but may part it out if all pieces are spoken for. Also the Teins and Sways have been spoken for already.
![ChinozTL is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#14
Racer
Join Date: Oct 2003
Location: Chicago, IL
Age: 41
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
Dib's on the sway bars if veen120 doesn't get. It'll fit 02 tl-s.. rite? pm me.
![hangbok is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#15
Show me da MONEY
Join Date: May 2003
Location: ATL (NY born & raised)
Posts: 388
Likes: 0
Received 0 Likes
on
0 Posts
Would you be willing to sell just the crank pulley?
I may want the magna flows, so i will call dibs on them....
I may want the magna flows, so i will call dibs on them....
Last edited by muffaburn; 06-13-2005 at 12:45 PM.
![muffaburn is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#16
is still kickin!
Join Date: Sep 2004
Location: Boston
Posts: 1,390
Likes: 0
Received 0 Likes
on
0 Posts
I'm also interested on the Tiens
![MeldyS26 is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#17
Show me da MONEY
Join Date: May 2003
Location: ATL (NY born & raised)
Posts: 388
Likes: 0
Received 0 Likes
on
0 Posts
What makes the magna flows "custom made" as stated? they look like regular axelbacks from your pic's. do you have any pic's of the exhaust on the car?
![muffaburn is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#18
Instructor
Thread Starter
Join Date: Mar 2001
Location: Wharton, NJ
Age: 43
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by muffaburn
What makes the magna flows "custom made" as stated? they look like regular axelbacks from your pic's. do you have any pic's of the exhaust on the car?
pics are here: http://www.acurainspired.com/gallery...1475&uuid=1015
![ChinozTL is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#19
Show me da MONEY
Join Date: May 2003
Location: ATL (NY born & raised)
Posts: 388
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ChinozTL
The custom part is that they are the magnaflow model number 14912 i believe and they had to have the piping and brackets made to be axel back on the TL. I have pics on the car which shoudl also be in the photo album where all the rest of the pics are located. I dont think magnaflow made axelback for our cars
pics are here: http://www.acurainspired.com/gallery...1475&uuid=1015
pics are here: http://www.acurainspired.com/gallery...1475&uuid=1015
![muffaburn is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#20
Instructor
Thread Starter
Join Date: Mar 2001
Location: Wharton, NJ
Age: 43
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by muffaburn
They look good, larger than I thought though. May be a little to big for my taste. So, are you willing to part with just the crank pulley?
![ChinozTL is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#21
Show me da MONEY
Join Date: May 2003
Location: ATL (NY born & raised)
Posts: 388
Likes: 0
Received 0 Likes
on
0 Posts
PM sent
![muffaburn is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#22
7th Gear
Join Date: Apr 2004
Location: Toronto
Age: 43
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
I'll take the WW front lip...how much do you want for it?
![Dunndada is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#24
Instructor
Thread Starter
Join Date: Mar 2001
Location: Wharton, NJ
Age: 43
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
I'd rather not part out the kit. Also here is a list of items with sales pending:
Neuspeed Swaybars
Magnaflow Exhaust
UniChip
Tein SS
Neuspeed Swaybars
Magnaflow Exhaust
UniChip
Tein SS
![ChinozTL is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#25
BUY MY CL - see garage!
Damn man, where were you last week! I just purchased the rear Neuspeed sway. Would you be willing to split them and just sell the front? I could pick up.
![lokijibber is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#26
BUY MY CL - see garage!
Originally Posted by ChinozTL
I would rather sell the WW kit as a whole, but may part it out if all pieces are spoken for. Also the Teins and Sways have been spoken for already.
nevermind
![Why Me](https://acurazine.com/forums/images/smilies/whyme.gif)
![lokijibber is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#27
7th Gear
Join Date: Apr 2004
Location: Toronto
Age: 43
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Black Acc (Rear Lip), VoLLy_1llusioNz (Side Skirts), Me (Front Lip) - I think all parts are spoken for...if you can talk to the other ppl and then maybe we can work something out...thanks!
![Dunndada is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#30
Instructor
Thread Starter
Join Date: Mar 2001
Location: Wharton, NJ
Age: 43
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
The Teins are sold. I have a guy that is interested in the whole kit. If he doesnt want it then I will part it out. $150 for front lip, $150 for rear lip, and $275 for the sideskirts, plus shipping on everything. The prices are higher to part it out b/c I will have to buy more packing materials and more boxes to ship everything individually.
![ChinozTL is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#31
7th Gear
Join Date: Apr 2004
Location: Toronto
Age: 43
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
That's cool...I'll take the front lip for $150 plus shipping - if it's ok with everyone who wants each part - why don't you sell it to us...you would make a bit more on it...I work for a trucking company - I could have it picked up - without packaging...
![Dunndada is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#32
Instructor
Thread Starter
Join Date: Mar 2001
Location: Wharton, NJ
Age: 43
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Dunndada
That's cool...I'll take the front lip for $150 plus shipping - if it's ok with everyone who wants each part - why don't you sell it to us...you would make a bit more on it...I work for a trucking company - I could have it picked up - without packaging...
Thanks
![ChinozTL is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#33
7th Gear
Join Date: Apr 2004
Location: Toronto
Age: 43
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
pm sent on shipping details
![Dunndada is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#35
Beware of leakage
Join Date: Dec 2002
Location: Shreveport, Louisiana, just east of nowhere
Age: 42
Posts: 19,790
Likes: 0
Received 0 Likes
on
0 Posts
I am seriously interested in the Magnaflows if they do indeed fit the AV6. Let me know the status on them as soon as you can.
Thanks
Thanks
![Chopsie is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#36
ASSEMBLED TO PERFECTION
Originally Posted by Dunndada
Black Acc (Rear Lip), VoLLy_1llusioNz (Side Skirts), Me (Front Lip) - I think all parts are spoken for...if you can talk to the other ppl and then maybe we can work something out...thanks!
![BLaCk Acc is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#37
Instructor
Thread Starter
Join Date: Mar 2001
Location: Wharton, NJ
Age: 43
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Chopper
I am seriously interested in the Magnaflows if they do indeed fit the AV6. Let me know the status on them as soon as you can.
Thanks
Thanks
If the sale falls through I will let you know, and they will definately fit the AV6 98-up
Thanks
![ChinozTL is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#38
Beware of leakage
Join Date: Dec 2002
Location: Shreveport, Louisiana, just east of nowhere
Age: 42
Posts: 19,790
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ChinozTL
If the sale falls through I will let you know, and they will definately fit the AV6 98-up
Thanks
Thanks
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
![Chopsie is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#39
Drifting
im also interested in magnaflows.. if it falls through hit me up. also i would like to take all your neuspeed struts and sways. im very local to you. i can pick it up anytime at jersey city (my office is located at jersey city). if you want i can even trade you my OEM mufflers for the magnaflows and i'll take your magnaflows for the price you want it for and you can have mine for no charge. could even do it at the shop of your choice. tell me if your interested.
![aaronnn is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#40
Instructor
Thread Starter
Join Date: Mar 2001
Location: Wharton, NJ
Age: 43
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by aaronnn
im also interested in magnaflows.. if it falls through hit me up. also i would like to take all your neuspeed struts and sways. im very local to you. i can pick it up anytime at jersey city (my office is located at jersey city). if you want i can even trade you my OEM mufflers for the magnaflows and i'll take your magnaflows for the price you want it for and you can have mine for no charge. could even do it at the shop of your choice. tell me if your interested.
Check your PM
![ChinozTL is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)