SOLD: Maxbore J35 68mm Throttle Body
#1
Maxbore J35 68mm Throttle Body
Category: Engine - Intake/Fuel
Price: $100
Private or Vendor Listing: Private Listing
Part Fits (you may select multiples): TL 3G
Location (State/Prov/Terr): CT
Item Condition: Used
Back says 68mm so I'm going to make an educated guess and say thats the size its bored out to. Its a little dirty, but in great shape.
#10
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
this will not bolt onto all 3G's
the 04-06 have a different pattern than the 07-08+ (08+ because the J35 and J37 have the same pattern)
the 04-06 have a different pattern than the 07-08+ (08+ because the J35 and J37 have the same pattern)
#11
Safety Car
iTrader: (7)
Join Date: Dec 2008
Location: San Jose, CA/ Charleston, WV
Posts: 4,045
Received 619 Likes
on
459 Posts
ugh yeah it will. I have an gen7 accord TB on a TL-S manifold. Accord manifold is the same as the 04-06 manifold. Even the part number were the same for the TB. Same goes for the gen 2 RL TB.
#12
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
when and where are you mailing me those 5 bucks?
Throttle Body Adapter Gunmetal J30 J32 J32A2 J35 Honda Acura CL TL Accord | eBay
FORGET accords, I dont know about accords...I have a J32 in my 3rd gen and if I want to run a throttle body from J35 or J37, either I need to get that adapter I posted ORR get the J35/J37 manifold...
if you have the J35, you can put the J37 throttle body, no issues!
Throttle Body Adapter Gunmetal J30 J32 J32A2 J35 Honda Acura CL TL Accord | eBay
FORGET accords, I dont know about accords...I have a J32 in my 3rd gen and if I want to run a throttle body from J35 or J37, either I need to get that adapter I posted ORR get the J35/J37 manifold...
if you have the J35, you can put the J37 throttle body, no issues!
#13
Safety Car
iTrader: (7)
Join Date: Dec 2008
Location: San Jose, CA/ Charleston, WV
Posts: 4,045
Received 619 Likes
on
459 Posts
J32a2 son not j32a3.
stop spreading wrong info. last time I check the TL have DBW. So why did you show me a pix of a wired throttle body.
We are talking about J35a8 motor here not j35z. Most of the Z motors have different bolt pattern compared to the older gen.
http://www.ebay.com/itm/2004-2006-Acura-TL-Throttle-Body-GMA3A-Honda-Accord-Odyssey-Pilot-Ridgeline-RL-/281686567435?hash=item4195d3ea0b&vxp=mtr
Now where my 5 bucks.
stop spreading wrong info. last time I check the TL have DBW. So why did you show me a pix of a wired throttle body.
We are talking about J35a8 motor here not j35z. Most of the Z motors have different bolt pattern compared to the older gen.
http://www.ebay.com/itm/2004-2006-Acura-TL-Throttle-Body-GMA3A-Honda-Accord-Odyssey-Pilot-Ridgeline-RL-/281686567435?hash=item4195d3ea0b&vxp=mtr
Now where my 5 bucks.
Last edited by thisaznboi88; 06-05-2015 at 02:30 PM.
#14
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
did you do ANY research at all?
here is a link to the P2R TB adapter
LINK: 04-08 TL Big Bore TB Adapter
and this is what it states:
so I repeat, where are you sending me those 5 bucks?
and certainly do your research before telling other THEY are spreading wrong info
here is a link to the P2R TB adapter
LINK: 04-08 TL Big Bore TB Adapter
and this is what it states:
This new Power Rev Racing throttle body adapter will allow you to bolt up a 09+ Acura TL SH-AWD 3.7 throttle body onto your 04-08 Acura TL or 03+ Honda Accord, and also 06+ Honda Civic Si. Why put a 09 Acura TL SH-AWD throttle body on your car? Here are the Sizes
and certainly do your research before telling other THEY are spreading wrong info
#15
Safety Car
iTrader: (7)
Join Date: Dec 2008
Location: San Jose, CA/ Charleston, WV
Posts: 4,045
Received 619 Likes
on
459 Posts
Can you not read
04-08 TL & 03+ Accord Throttle Body Size:
Inlet ID: 67mm
Outlet ID: 65mm
09+ Acura TL SH-AWD Throttle Body Size:
Inlet ID: 80mm
Outlet ID: 70mm
OP was selling a gen3 TB. Why are you bring up a 4th gen TL?
Now where my 5 bucks.
here another one. Go look up the part numbers
Throttle Body Accord Pilot TL 05 06 07 08 3 0 GMA3A 705478 | eBay
04-08 TL & 03+ Accord Throttle Body Size:
Inlet ID: 67mm
Outlet ID: 65mm
09+ Acura TL SH-AWD Throttle Body Size:
Inlet ID: 80mm
Outlet ID: 70mm
OP was selling a gen3 TB. Why are you bring up a 4th gen TL?
Now where my 5 bucks.
here another one. Go look up the part numbers
Throttle Body Accord Pilot TL 05 06 07 08 3 0 GMA3A 705478 | eBay
Last edited by thisaznboi88; 06-05-2015 at 02:36 PM.
#16
Safety Car
iTrader: (7)
Join Date: Dec 2008
Location: San Jose, CA/ Charleston, WV
Posts: 4,045
Received 619 Likes
on
459 Posts
did you do ANY research at all?
here is a link to the P2R TB adapter
LINK: 04-08 TL Big Bore TB Adapter
and this is what it states:
so I repeat, where are you sending me those 5 bucks?
and certainly do your research before telling other THEY are spreading wrong info
here is a link to the P2R TB adapter
LINK: 04-08 TL Big Bore TB Adapter
and this is what it states:
so I repeat, where are you sending me those 5 bucks?
and certainly do your research before telling other THEY are spreading wrong info
#17
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
you know what, I take it back....
I went back through my thread and my notes to compare (I should have done this before)....you cannot run a J37 TB, but you can run a J35 TB on a J32...
the TB on J35 and J32 are compatible...I mistook this for the manifold top plate/cover...
when I was going for a J37 TB for my J32, I thought I will pick up the J35 manifold but since the cover was not compatible, I just ended up getting a whole J37 TB and manifold setup and I think I had that set in my head as TB not compatible....I was one of the first few to do the J37 on the J32...I sent the parts list to sonnick for him to do the conversion as well....
I apologize...totally my mistake...I checked on delray Acura and the part numbers are same across all 3G J32 and J35....you need that adapter I mentioned if you are putting a J37 TB on a 3G....
send me you paypal...!
here is my engine bay:
DSC_1806 by Anil Sadhwani, on Flickr
I went back through my thread and my notes to compare (I should have done this before)....you cannot run a J37 TB, but you can run a J35 TB on a J32...
the TB on J35 and J32 are compatible...I mistook this for the manifold top plate/cover...
when I was going for a J37 TB for my J32, I thought I will pick up the J35 manifold but since the cover was not compatible, I just ended up getting a whole J37 TB and manifold setup and I think I had that set in my head as TB not compatible....I was one of the first few to do the J37 on the J32...I sent the parts list to sonnick for him to do the conversion as well....
I apologize...totally my mistake...I checked on delray Acura and the part numbers are same across all 3G J32 and J35....you need that adapter I mentioned if you are putting a J37 TB on a 3G....
send me you paypal...!
here is my engine bay:
DSC_1806 by Anil Sadhwani, on Flickr
#19
What is the OEM size?
https://acurazine.com/forums/second-...d-fast-568447/
https://acurazine.com/forums/second-...d-fast-568447/
The TL-S throttle body is 68mm. I measured mine before sending to King Motorsports to be bored out.
Last edited by Bruce Banner; 06-06-2015 at 12:19 PM.
#26
Cruisin'
Join Date: Aug 2015
Location: Orlando, Florida
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
will it fit J32A2?
Thread
Thread Starter
Forum
Replies
Last Post
TheTLProject
3G TL Performance Parts & Modifications
15
02-10-2016 10:45 AM