J32A2 parts (engine, IM, TB, spacer)
 

Put in another J32 in my car selling some parts off the old engine, and the engien itself for those who wish to rebuild it or get the cylinder heads. camshafts etc. Cyl. #4 was leaking oil and burning it so I presume that ring is gone, basically had oil on the spark plug of that cylinder.

Locals would as always be prefered then you can see the parts in person etc. I would be willing to ship some of the smaller stuff, also larger items depending on demand.

Now for the pics :)

http://carphotos.cardomain.com/ride_...0063_large.jpg

http://carphotos.cardomain.com/ride_...0065_large.jpg

Engine can be $200 picked up in El Monte CA
spacer $40
crank pulley $40
IM $100
TB $70
lower runners $50
fuel injectors $10 each (some have chipped nozzle lips)
Walbro G@3342 fuel pump $35
EGR $50
Engine covers (kinda damaged) $20 (for both of them)


http://carphotos.cardomain.com/ride_...0068_large.jpg

http://carphotos.cardomain.com/ride_...0071_large.jpg

http://carphotos.cardomain.com/ride_...0073_large.jpg

http://carphotos.cardomain.com/ride_...0077_large.jpg

http://carphotos.cardomain.com/ride_...0081_large.jpg

http://carphotos.cardomain.com/ride_...0083_large.jpg

http://carphotos.cardomain.com/ride_...0087_large.jpg

http://carphotos.cardomain.com/ride_...0089_large.jpg

http://carphotos.cardomain.com/ride_...0092_large.jpg

http://carphotos.cardomain.com/ride_...0063_large.jpg

http://carphotos.cardomain.com/ride_...0063_large.jpg

what kind of IM spacer is that?

Its the Outlaw spacer for the J32, had two on my car so now I only have one :)

Dibs on the IM/TB

PM'd

Is the TB from the 6 speed or auto? If it is from 6 speed i would be interested in tb and runners if you can ship.

Well technically its from the auto since the J32 I bought was an auto but there's no difference between 6spd and auto IM/TB, you can just interchange them :)

Also working on getting some shipping quotes for some of you

I thought I read on here that there was a difference between auto and manual and when you look up the throttle body they have different part numbers so not sure. https://acurazine.com/forums/2g-cl-2001-2003-50/throttle-body-variances-btween-years-types-p-6mt-469903/#post7045968 This thread has some info but dsnt really have answers as to what works.

In practicallity sense it doesn't seem to matter, i'm running the 03 CLS ECU and it doesn't seem to have any impact.
Checked hondanews.com and it doesn't mention any differences either :)

type S parts FTW

Bump

open to offers

Could you give me a price for the tb and lower runners shipped to 60047 pls if you are willing to ship.

will the intake manifold fit on 2005 TL? The top and the bottom pieces?? I got a leak in the manifold, need a new one = ((

I'll try $100 shipped with that USPS "if it fits, it ships" box system. But I would prefer to sell the IM as well. Sure you don't want a spare for polishing? ;)

It is a little different in terms of runner opening shape and even the EGR port shape location. It might work with a little grinding here and there, but I don't think it would work. Can't fix the leak?

[QUOTE=Accord_V6_400m;12245534]I'll try $100 shipped with that USPS "if it fits, it ships" box system. But I would prefer to sell the IM as well. Sure you don't want a spare for polishing? ;)

100 just for shipping? What would the total be with the IM included also.

[QUOTE=brian6speed;12246053]$100 shipping included for TB and runners. The IM included I guess I would just round it up to $200 shipped and paypaled (thats everything included)

How much of this do you still have left?

What's included with the fuel pump

Still have all of it left, haven't been very proactive about selling it.
Just the fuel pump :)

70 shipped for Spacer and fuel pump(assuming it works)?

I'll do $75 :) That way it takes care of paypal fees & shipping a little more accordingly.

Fuel pump should work :)
Just came about extra ones in the course of modding my car, guess after a few supercharger kits that will happen ;)

If it doesn't will you buy it back for the amount you listed it for?

Also, will I be able to use my standard bolts or do I need longer ones? If i need new ones, where can I buy them?

the kit on Outlaw's website also sells with TB spacer, do you still have that too?

yeah im down for that
you'll need bolts that are about 10mm longer maybe even just 5mm longer will do. Go to Ace hardware or Tru Value to find the bolts.

Never had the TB spacer :)

If you still have these when I get back from San Diego, I will buy them for sure.

Im buying an engagement ring so I hope I have money leftover :)

Haven't bumped this thread in a while, anyone interested?

can you pm me your email address have a few questions. Cant pm yet need more post LOL

Still down for the fuel pump and spacer, I couldnt find this thread lol.

I haven't taken my IM off in a while, do the bolts come out of the top(easy to change) or do the bolts have to be changed from the bottom?

Its from top :)

It should be 7 bolts and 2 studs if I remember correctly.

OK where do i paypal the money?

nick10923@yahoo.com :)

Fuel pump and spacer SOLD!!
and
SHIPPED!!

Wow very fast shipping, PM me tracking if you have.

just curious, who make that spacer?

pm'ed

Can't find the reciept =/
Damn USPS rushing me out of there, haha.
You'll be getting it in a medium flat rate box.
You get a free plastic case out of it too, you'll see ;)
It was used for BMW fuel injectors, I use them for Shamee's

Outlaw of course, I had two, so I have one left :)

Replied ;)

Wow, got today, how do I leave feedback?

Check out the sticky thread at the top of the forum page.

And thank you for taking the time to leave feedback.

https://acurazine.com/forums/car-parts-sale-361/trader-ratings-information-9sep16-revised-instructions-posted-713142/

are you selling the engine covers? I need the smaller one..
hit me up on here or

how much for IM and lower runners? + i would be interested in heads too...

Sold the engine with heads for some retro parts (that im waiting to get)
IM and lower runners, waiting for a TL-P guy to get back to me on that, hes a little apprehensive becasue of the bypass valve actuator function and possible MSD RPM box.

Fuel pump didn't have the knob on the bottom to connect the fuel filter sock, kinda messed up because thats the only thing that holds it on, where can I send it back to? You said if it doesn't work out I can send back for refund.