SOLD: Injen Intake RD1482p
#1
Safety Car
Thread Starter
iTrader: (5)
Injen Intake RD1482p
Category: Engine - Intake/Fuel
Price: $99
Private or Vendor Listing: Private Listing
Part Fits (you may select multiples): TL 3G, Other Honda/Acura, Type-S Model
Location (State/Prov/Terr): CA
Item Condition: Used
My coworker didn't install it correctly on his car (I didn't know him at the time) so there were some issues with it. He had rubbing on the underside of the intake (some members have had this same rub) and it created a through wall hole, see picture attached at the bottom of the thread.
i had a welder do a weld repair on it and he plugged up the hole and then sanded the outside of the intake. i filed down the inside weld material but there is still about 1/8 to 1/4th of weld material on the side. you can probably file it down some more but it shouldn't have any negative effect on the performance.
there was also some wear where the vibramount slot is, but this has no effect if you tighten down the vibramount well with a washer.
the price includes shipping, the intake, the coupler, and the pipe clamps. you would need to buy a filter for it and a vibramount (less than $10). the intake brand new costs over $200
$99 shipped
weld repair (no hole)
inside weld material (about 1/8th to 1/4th inch high, can be filed some more)
vibramount slot wear (still works with a washer)
some of the coupler was torn off, but as you can see here you can still easily and securely clamp down the coupler still
intake with the hole BEFORE the weld repair (it does not look like this now)
#3
Safety Car
Thread Starter
iTrader: (5)
yea i was reading up on it and it seems that there is a lip the intake goes over as it turns to go towards the fender and if you don't put some foam or something down, then you could possibly rub. seems like it just varies from car to car. with this weld repair and some foam laid down this intake is good to go
i still owe you an itrader rating!
#5
Safety Car
Thread Starter
iTrader: (5)
Would you be willing topart out for $60? Email me if interested. Sneh_g_vet@yahoo.com
#6
Advanced
iTrader: (1)
thanks!
yea i was reading up on it and it seems that there is a lip the intake goes over as it turns to go towards the fender and if you don't put some foam or something down, then you could possibly rub. seems like it just varies from car to car. with this weld repair and some foam laid down this intake is good to go
i still owe you an itrader rating!
yea i was reading up on it and it seems that there is a lip the intake goes over as it turns to go towards the fender and if you don't put some foam or something down, then you could possibly rub. seems like it just varies from car to car. with this weld repair and some foam laid down this intake is good to go
i still owe you an itrader rating!
#7
excuse me for being a noob lol. Would you be willing to sell for $60 plus shipping to norcal 95212?
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
rp_guy
Member Cars for Sale
9
07-16-2017 07:33 AM
rcs86
Car Parts for Sale
3
08-02-2016 06:52 PM