FS: Zenetti Deuce Black/Machined w/ Polished Lip 19x8.5 and 40 Offset
#1
Iro Ridg .308
Thread Starter
FS: Zenetti Deuce Black/Machined w/ Polished Lip 19x8.5 and 40 Offset
First the pics with A-spec and Tein SS drop:
Zenetti Deuces
Machined with Polished and Black dual spoke design
Polished Lip
19"x 8.5" Offeset 40
Includes hubcentric ring
Here's a chance to step your game up especially if you're on a budget. I've had these (original owner) for just over 3 years. Nothing but compliments during the day or night. Easily seen 10 split spoke design during the day, then what appears to be just a 5 spoke split design during the night. It's like having 2 sets of rims in 1!
These are being sold since I've just upgraded to Volks and I have no reason to keep 2 sets unless I decide to put these on my GF accord but I'd rather get paid!
Will more than likely need a spacer if planning to fit over factory brembos.
Disclosure:
I'll get better pics once the rims are all off but I will let you know right now that all 4 rims will need to be refinished. Primarily since the clear coat has started to peel pretty badly on the lip and face of 3 rims but they all could use a fresh makeover anyway. This may actually work to your advantage since if you're planning to get them done, you can just have them custom colored for the whole wheel or a mix-n-match the way it is right now. Depending where you go, pricing for refinishing a wheel will cost anywhere from $50-120 per wheel. You'll have to shop around.
If you're on a tight budget, you could just put these on for the winter time, save some money, then come spring time, get them re-worked and slapped on. The ladies will appreciate it!
1 small bend (inner side of 1 rim) but local Tire service manager said it wasn't a big deal. If you get it refinished, they typically fix all the bends as well. Either way, all 4 rims hold air just fine. I'm currently running 245/35 series tires but sale doesn't include tires. Rims, centercaps, valve stems, and hubcentric rings only. No TPMS sensors on these.
KILLER PRICE AND PRICED TO SELL:
You won't find anything better looking, especially at this price. These would cost you approx $1350 if purchased new.....
$$$ 675.00 USD and I'll split shipping
$$$ 715.00 USD if via paypal but I'll still split shipping
The gods must be crazy.
Zenetti Deuces
Machined with Polished and Black dual spoke design
Polished Lip
19"x 8.5" Offeset 40
Includes hubcentric ring
Here's a chance to step your game up especially if you're on a budget. I've had these (original owner) for just over 3 years. Nothing but compliments during the day or night. Easily seen 10 split spoke design during the day, then what appears to be just a 5 spoke split design during the night. It's like having 2 sets of rims in 1!
These are being sold since I've just upgraded to Volks and I have no reason to keep 2 sets unless I decide to put these on my GF accord but I'd rather get paid!
Will more than likely need a spacer if planning to fit over factory brembos.
Disclosure:
I'll get better pics once the rims are all off but I will let you know right now that all 4 rims will need to be refinished. Primarily since the clear coat has started to peel pretty badly on the lip and face of 3 rims but they all could use a fresh makeover anyway. This may actually work to your advantage since if you're planning to get them done, you can just have them custom colored for the whole wheel or a mix-n-match the way it is right now. Depending where you go, pricing for refinishing a wheel will cost anywhere from $50-120 per wheel. You'll have to shop around.
If you're on a tight budget, you could just put these on for the winter time, save some money, then come spring time, get them re-worked and slapped on. The ladies will appreciate it!
1 small bend (inner side of 1 rim) but local Tire service manager said it wasn't a big deal. If you get it refinished, they typically fix all the bends as well. Either way, all 4 rims hold air just fine. I'm currently running 245/35 series tires but sale doesn't include tires. Rims, centercaps, valve stems, and hubcentric rings only. No TPMS sensors on these.
KILLER PRICE AND PRICED TO SELL:
You won't find anything better looking, especially at this price. These would cost you approx $1350 if purchased new.....
$$$ 675.00 USD and I'll split shipping
$$$ 715.00 USD if via paypal but I'll still split shipping
The gods must be crazy.
#3
Why the big increase for paypal? I thought it's like 3% which would make it $695.
#6
Iro Ridg .308
Thread Starter
Originally Posted by Ron A
Why the big increase for paypal? I thought it's like 3% which would make it $695.
Actually, I think paypal has like a "stepped / laddered" charging system. For items over $100, I'm pretty sure the rates climb but maybe I'm getting it confused with how Ebay works?!?
Last edited by special-ed; 01-05-2008 at 10:21 PM.
#7
Iro Ridg .308
Thread Starter
Originally Posted by CorvettePoor
Ed, What is your location ?
I was under the impression you picked up a set of rims already. Anyway, yeah. Northern California area. East Bay not too far from San Francisco.
Trending Topics
#8
Iro Ridg .308
Thread Starter
Also, if you're interested in REP points....
check my ebay "SMOOTH-E-SELLING".
As long as I'm not dealing with any over-seas buyers or other ebayers who have a long history of negative transactions, I'm good to go. Been there, done that will all those "types" of buyers.
I GUARANTEE YOU WON'T FIND THESE RIMS ANYWHERE IN A 19" FORMAT.
As long as I'm not dealing with any over-seas buyers or other ebayers who have a long history of negative transactions, I'm good to go. Been there, done that will all those "types" of buyers.
I GUARANTEE YOU WON'T FIND THESE RIMS ANYWHERE IN A 19" FORMAT.
#11
Iro Ridg .308
Thread Starter
Originally Posted by nycxtsx05
would these fit on a tsx ?? if so i may be interested
http://www.rims-n-tires.com/info_spe...rw1=8.0&et1=45
You'll have to load the TSX stock settings on the left then load this rim size and tire of your choice on the right. It'll tell you whether it will clear or not.
Keep in mind if you like to ride on stretched tires, this calculator won't allow you to do it. For example on a 9.5 width rim, it would allow me to put a 245/35 series tire but not a 235/35 however many guys on here have put on 235/35 to get the VIP look.
#14
ur pms full...
as i already know i'll be getting charged anywhere from 160-260 for each wheel to be refinished. so if you could find something better and get them done for me that would be greatly appreciated. but could you send the pics of them anyways to fern_lau@hotmail.com. would still like to know the condition of these.
as i already know i'll be getting charged anywhere from 160-260 for each wheel to be refinished. so if you could find something better and get them done for me that would be greatly appreciated. but could you send the pics of them anyways to fern_lau@hotmail.com. would still like to know the condition of these.
#16
Iro Ridg .308
Thread Starter
Originally Posted by TL-A-Spec
ur pms full...
as i already know i'll be getting charged anywhere from 160-260 for each wheel to be refinished. so if you could find something better and get them done for me that would be greatly appreciated. but could you send the pics of them anyways to fern_lau@hotmail.com. would still like to know the condition of these.
as i already know i'll be getting charged anywhere from 160-260 for each wheel to be refinished. so if you could find something better and get them done for me that would be greatly appreciated. but could you send the pics of them anyways to fern_lau@hotmail.com. would still like to know the condition of these.
Like I said on PM, I'll see what I can find here locally. If I can sell as-is, that will save me the time and trouble of doing it which is why the price is so low.
#17
Iro Ridg .308
Thread Starter
Originally Posted by special-ed
I'm on Tein SS so it's adjustable
This issue is known and easily fixable since all you have to do is cut that part of the A-spec plastic. Search Blackura's threads - he's covered this. I also could have adjusted the spring perches but felt it was better use of my time to just cut a small piece of plastic.
#19
Iro Ridg .308
Thread Starter
Originally Posted by Final
Ok with those daytime pics what would you say the drop was?
#22
Iro Ridg .308
Thread Starter
These were just taken an hour ago approx 12:30am at the most well lit gas station I could find. Pics with flash really shows where the rims need refinishing. Like I said, in my first post, 3 of the rims could definitely use it. Pics w/out flash shows exactly how you would see them if you were standing 3 feet away.
Few pics without camera flash:
With Flash:
With NO flash from further away:
Won't take much to get these back to new. Priced to sell. I'll give this listing another 1-2 weeks. If there's no committed buyer, these will get refinished and given to my GF for her accord for part of her valentine's day gift.
Few pics without camera flash:
With Flash:
With NO flash from further away:
Won't take much to get these back to new. Priced to sell. I'll give this listing another 1-2 weeks. If there's no committed buyer, these will get refinished and given to my GF for her accord for part of her valentine's day gift.
Thread
Thread Starter
Forum
Replies
Last Post
rp_guy
Member Cars for Sale
9
07-16-2017 07:33 AM
calrow
Car Parts for Sale
11
05-03-2017 10:21 PM
SinCityTLX
5G TLX Tires, Wheels & Suspension
55
10-11-2015 01:20 AM
detailersdomain
Wash & Wax
3
10-09-2015 10:13 PM