FS: parting out my car | 1G CL | bay area, ca
#1
Senior Moderator
Thread Starter
Join Date: Jul 2002
Location: Bay Area, CA
Age: 39
Posts: 12,005
Likes: 0
Received 9 Likes
on
8 Posts
FS: parting out my car | 1G CL | bay area, ca
All prices do NOT including shipping unless otherwise noted. Also, all prices are OBO. I would prefer to sell to locals so that I don't have to deal with shipping, but we'll see how it goes.
***Pictures of the various items can be found on page 1 of this thread . If anyone wants more pics, let me know and I can take extra pictures of the various parts.
You can either post here, PM me, send me an email (daklepto@gmail.com) or IM me: daklepto
18” G-racing Seki in Gloss Black finish ($300) pending
18x7.5, +42 offset. Had them on the car for a few years so they show some usage. 3 of the wheels have minor curb rash, 2 had hairline cracks that I had a shop weld back together. They all hold air and are straight, no bends.
Wings west front lip ($200) priority goes to locals
Good condition, some scrapes on the underside, you cant see it unless you’re under the car.
![](https://img527.imageshack.us/img527/2341/img9997ml0.jpg)
Wings west sides custom made from accord fitment. ($150) priority goes to locals
Paint is chipping in some areas, doesn’t matter if you’re going to repaint anyways. The bottom part of it was cut out to make way for my puddle lights, you cant see this at all unless you are literally under the car.
![](https://img526.imageshack.us/img526/513/img0017ui4.jpg)
Wings west rear custom made from accord fitment ($400) priority goes to locals
This piece was professionally modified. It was originally a 96-97 accord w-type rear. In order to fit properly it had to be cut in half and put back together. You cannot use bondo or fiberglass since it will crack from the flex from normal driving. When looking around for shops to do the modification I got quoted $500, $600 (just for the modification) and two shops that said they wouldn’t even do it. The shop I finally found used a certain bumper repair material that is strong and flexible, you can hold your finger out and balance the rear lip and it will flex with no issues. I’ve had it on my car for a few years and it still is it great condition. NO cracks or scrapes at all. This is a one of a kind piece.
***If someone wants to buy all parts to the lip kit, I will knock off $100 and sell the set for $650.***
K-sport coilovers ($sold)
These will run you ~$700 new, had them on for about 1.5 years and I didn’t even drive my car that much. These are made in the same factory as D2, they have 3 collars, not 2, so you can keep the same spring load/travel and just adjust the strut body to your required height. They are in great condition. Spring rate is F 14/ R 8, comes with the spanner wrenches.
![](http://img.photobucket.com/albums/v619/daklepto/CL/19-1.jpg)
Rockblocker taillight tint kit ($40 shipped)
I bought two kits and never needed to use the 2nd. So this is brand new, it is the darker tint of the two available. Great alternative to a spray because you can actually remove this if needed.
Brembo cross drilled/slotted rotors fronts only ($40) fits 97’s only
Good condition, had them on my car for a few years and then swapped them out for a different set of front rotors when I thought that my rotors were messed when it fact my axel was failing. But by the time we found that out we had already put on the new fronts so these have just been sitting around since.
APR strut bar, blue mounts ($75)
Retails for ~$110+ new. Great condition, really nice and beefy strut bar, looks great too
![](http://img.photobucket.com/albums/v619/daklepto/CL/15.jpg)
Tview 6" sunvisor screen. The sunvisor screen is just ONE and is for the passenger side. ($50)
The sunvisors are the stock grey in color (are there even any other colors?) The screen is mounted into the OEM visor. Comes with remote and original box.
![](http://img61.imageshack.us/img61/6827/06mb6.jpg)
Clear corners ($20)
Pretty self explanitory, good condition.
***Pictures of the various items can be found on page 1 of this thread . If anyone wants more pics, let me know and I can take extra pictures of the various parts.
You can either post here, PM me, send me an email (daklepto@gmail.com) or IM me: daklepto
18” G-racing Seki in Gloss Black finish ($300) pending
18x7.5, +42 offset. Had them on the car for a few years so they show some usage. 3 of the wheels have minor curb rash, 2 had hairline cracks that I had a shop weld back together. They all hold air and are straight, no bends.
Wings west front lip ($200) priority goes to locals
Good condition, some scrapes on the underside, you cant see it unless you’re under the car.
![](https://img527.imageshack.us/img527/2341/img9997ml0.jpg)
Wings west sides custom made from accord fitment. ($150) priority goes to locals
Paint is chipping in some areas, doesn’t matter if you’re going to repaint anyways. The bottom part of it was cut out to make way for my puddle lights, you cant see this at all unless you are literally under the car.
![](https://img526.imageshack.us/img526/513/img0017ui4.jpg)
Wings west rear custom made from accord fitment ($400) priority goes to locals
This piece was professionally modified. It was originally a 96-97 accord w-type rear. In order to fit properly it had to be cut in half and put back together. You cannot use bondo or fiberglass since it will crack from the flex from normal driving. When looking around for shops to do the modification I got quoted $500, $600 (just for the modification) and two shops that said they wouldn’t even do it. The shop I finally found used a certain bumper repair material that is strong and flexible, you can hold your finger out and balance the rear lip and it will flex with no issues. I’ve had it on my car for a few years and it still is it great condition. NO cracks or scrapes at all. This is a one of a kind piece.
***If someone wants to buy all parts to the lip kit, I will knock off $100 and sell the set for $650.***
K-sport coilovers ($sold)
These will run you ~$700 new, had them on for about 1.5 years and I didn’t even drive my car that much. These are made in the same factory as D2, they have 3 collars, not 2, so you can keep the same spring load/travel and just adjust the strut body to your required height. They are in great condition. Spring rate is F 14/ R 8, comes with the spanner wrenches.
![](http://img.photobucket.com/albums/v619/daklepto/CL/19-1.jpg)
Rockblocker taillight tint kit ($40 shipped)
I bought two kits and never needed to use the 2nd. So this is brand new, it is the darker tint of the two available. Great alternative to a spray because you can actually remove this if needed.
Brembo cross drilled/slotted rotors fronts only ($40) fits 97’s only
Good condition, had them on my car for a few years and then swapped them out for a different set of front rotors when I thought that my rotors were messed when it fact my axel was failing. But by the time we found that out we had already put on the new fronts so these have just been sitting around since.
APR strut bar, blue mounts ($75)
Retails for ~$110+ new. Great condition, really nice and beefy strut bar, looks great too
![](http://img.photobucket.com/albums/v619/daklepto/CL/15.jpg)
Tview 6" sunvisor screen. The sunvisor screen is just ONE and is for the passenger side. ($50)
The sunvisors are the stock grey in color (are there even any other colors?) The screen is mounted into the OEM visor. Comes with remote and original box.
![](http://img61.imageshack.us/img61/6827/06mb6.jpg)
Clear corners ($20)
Pretty self explanitory, good condition.
#6
Senior Moderator
Thread Starter
Join Date: Jul 2002
Location: Bay Area, CA
Age: 39
Posts: 12,005
Likes: 0
Received 9 Likes
on
8 Posts
Originally Posted by XxAtTheGatesxX
klepto, is it $650 for the kit shipped?
Originally Posted by klepto
All prices do NOT including shipping unless otherwise noted.
The kit is pending to a local buyer as of now and there is another non local buyer in line if that doesnt fall through. I will let you know.
Trending Topics
#8
Edited the sunvisor screen description.
#9
Instructor
Join Date: Mar 2008
Location: sac
Age: 35
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
why did i go through with my lip kit so early? I would prolly take your lip kit for 1k, since there was so much modding done to it. are there anymore parts to be parted out? or are those all of them?
Sad to see it go, your car was my car's idol.
Sad to see it go, your car was my car's idol.
#10
Senior Moderator
Thread Starter
Join Date: Jul 2002
Location: Bay Area, CA
Age: 39
Posts: 12,005
Likes: 0
Received 9 Likes
on
8 Posts
all parts are pending as of now, that as quick. But newbee if youre seriously willing to pay 1K, id make an exception for you ![Wink](https://acurazine.com/forums/images/smilies/wink.gif)
even the parts that I didnt list people have been PMing me about and trying to work something out
Shoot me a PM if you have any questions.
![Wink](https://acurazine.com/forums/images/smilies/wink.gif)
even the parts that I didnt list people have been PMing me about and trying to work something out
![rofl](https://acurazine.com/forums/images/smilies/rofl.gif)
#11
Racer
you don't still have the frost white stock skirts, do you?
this is most likely a stupid question as I dunno if they even come off the car or if the aftermarket sides replace them or what ... flame away
this is most likely a stupid question as I dunno if they even come off the car or if the aftermarket sides replace them or what ... flame away
![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
#12
Senior Moderator
Thread Starter
Join Date: Jul 2002
Location: Bay Area, CA
Age: 39
Posts: 12,005
Likes: 0
Received 9 Likes
on
8 Posts
Originally Posted by irresponsiblekid
you don't still have the frost white stock skirts, do you?
this is most likely a stupid question as I dunno if they even come off the car or if the aftermarket sides replace them or what ... flame away![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
this is most likely a stupid question as I dunno if they even come off the car or if the aftermarket sides replace them or what ... flame away
![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
![rofl](https://acurazine.com/forums/images/smilies/rofl.gif)
They come off somehow I'm not sure but he says he knows how so I might just let him swap it out.
#15
Senior Moderator
Thread Starter
Join Date: Jul 2002
Location: Bay Area, CA
Age: 39
Posts: 12,005
Likes: 0
Received 9 Likes
on
8 Posts
Originally Posted by elkay
do you still have the oem skirts?
sell me your air bags?
sell me your air bags?
![rofl](https://acurazine.com/forums/images/smilies/rofl.gif)
Originally Posted by NitiNiteZ
do those rims have tires on them? hows the tread?
time to update this thread
ALL ITEMS ARE SOLD except for the wheels
kit is pending payment to germ
tail light tint and sunvisor screen sold to germ
clear corners sold to irresponsible kid
brembos sold to CLpnwer
strut bar sold to BLenz
also added pics for the wheels. again, they do NOT come with tires. Locals prefered (bay area, ca)
![](http://img1.hugeup.com/t/06112008/7d1d4e00.jpg)
wheel1
![](http://img1.hugeup.com/t/06112008/bff04748c2fa.jpg)
wheel2
![](http://img1.hugeup.com/t/06112008/6861863f44.jpg)
wheel3
![](http://img1.hugeup.com/t/06112008/f84a0.jpg)
wheel4
![](http://img1.hugeup.com/t/06112008/57154d.jpg)
Thread
Thread Starter
Forum
Replies
Last Post
Oakes
Wash & Wax
10
10-12-2015 11:17 AM