FS: Max Fidelity Dynaudio clones NIB!
#1
VP Electricity
Thread Starter
Join Date: Jun 2004
Location: Portland OR US
Age: 58
Posts: 4,617
Likes: 0
Received 8 Likes
on
1 Post
FS: Max Fidelity Dynaudio clones NIB!
I own a set of Max Fidelity tweeters, 5" cast-frame mids, and 7" cast-frame midwoofers. These are all the 4 ohm car units, New In Box! I bought them for a project I am now not doing - my loss is your gain! Teese are drivers assembled in Canada from parts made in China, and they are Dynaudio knockoffs as the pics show.
The tweeter is the MFDT3NEO 30mm Silk Dome, 80 watts, 90dB SPL 1W/1M, resonant freq of 1440, and fits in a 56mm cutout. Flush mount kit is included.
The 5" and 6" drivers use 3" voice coils, are 90 and 89dB SPL 1W/1M respectively, are rated at 130 W, and use the Dyne-type one-piece cone-dust cap with the VC vents around the edge of the dust cap area. The cast frames are powder-coated.
The 5" fints in a 125mm hole, and has a Qts of .44. The 7" fits in a 135mm hole, and has a Qts of .52 (these are the "high" Qts versions for in-door mounting, rather than small enclosure mouting).
Buying these from a distributor costs the following:
Tweeter: $53 ea, or $106/pair
5" mid: $111 ea, or $222 pair
6" woofer: $117 ea, or $234/pair
These came with no crossovers.
I will sell them as follows:
Tweeters only: $65
5" mids only: $135
7" mids only: $165
All drivers no xovers: $300 for all.
Tweeter and 5", no xovers $200
Tweeter and 7", no xovers $225
Add in a 2-way computer-designed, audiophile-grade, assymetric passive xover with a rotary L-pad for tweeter level adjustment in your car - additional $50.
PM me with inquiries, thanks.
The tweeter is the MFDT3NEO 30mm Silk Dome, 80 watts, 90dB SPL 1W/1M, resonant freq of 1440, and fits in a 56mm cutout. Flush mount kit is included.
The 5" and 6" drivers use 3" voice coils, are 90 and 89dB SPL 1W/1M respectively, are rated at 130 W, and use the Dyne-type one-piece cone-dust cap with the VC vents around the edge of the dust cap area. The cast frames are powder-coated.
The 5" fints in a 125mm hole, and has a Qts of .44. The 7" fits in a 135mm hole, and has a Qts of .52 (these are the "high" Qts versions for in-door mounting, rather than small enclosure mouting).
Buying these from a distributor costs the following:
Tweeter: $53 ea, or $106/pair
5" mid: $111 ea, or $222 pair
6" woofer: $117 ea, or $234/pair
These came with no crossovers.
I will sell them as follows:
Tweeters only: $65
5" mids only: $135
7" mids only: $165
All drivers no xovers: $300 for all.
Tweeter and 5", no xovers $200
Tweeter and 7", no xovers $225
Add in a 2-way computer-designed, audiophile-grade, assymetric passive xover with a rotary L-pad for tweeter level adjustment in your car - additional $50.
PM me with inquiries, thanks.
Thread
Thread Starter
Forum
Replies
Last Post
BoricuaTL
Car Parts for Sale
138
04-08-2016 01:08 PM
4drviper
3G TL Tires, Wheels & Suspension
2
09-23-2015 07:42 PM