xenolite

Hi Everyone

I'm selling my custom sub enclosure, Nakamichi sub, Monster 1F capacitor, Nakamichi amps and amp rack for CL/TL (Should fit accords too).

Everything (except for the display on the cap) works well and is in excellent condition. It fits nicely in the trunk and leaves plenty of space for other things, it won't move around during spirited driving either.
Asking for $600 CDN.
I'm selling it because I need the money so help a brother out?

Details on equipment being sold:

Nakamichi PA1004 400 watt 4 Channel Amplifier

Specifications:
4/3/2 channel (50 W x 4; four ohms) amplifier
12dB/octave high and low pass variable frequency crossover
42Hz bass boost circuit
Input level control accommodating input levels from 150mV to 4 volts.
True line outputs; allow for the individual designation of the high and low pass filters as well as a flat setting.
Low-profile design (less than 2.14')
Black matte finish with brushed silver accent
Remote bass level port (requires optional RBC-1)
Protection from short-circuits; thermal conditions etc.
Gold-plated speaker and power connectors
Time-delay turn-on/off eliminates 'thumps' completely

Nakamichi PA4001 Amplifier

Specifications:
200 W x 1 (4 ohms) Class D monoblock design amplifier
Utilizes a high-speed power comparator with four high-current, high-voltage power MOSFET devices
24dB/octave high and low pass variable frequency crossover
42Hz bass boost control
Adjustable input control accommodating levels from 150mV to 4 volts.
The four line inputs provide constant subwoofer fading from the front/rear output of a typical head unit.
Low-profile design (less than 2.14")
Black matte finish with brushed silver accent
Remote bass level port (requires optional RBC-1)
Protection from short-circuits, thermal conditions etc.
Gold-plated speaker and power connectors
Time-delay turn-on/off eliminates "thumps" completely

Nakamichi SP-W1200D DVC Subwoofer

SUBWOOFER SPECIFICATIONS Diameter: 12" 305mm Sensitivity: 88dB Power Handling: Watts RMS: 450 Watts Watts Peak: 650 Watts Frequency Response: 20Hz-500Hz Nominal Impedance: 2 x 6 Ohms Cone Material: Pulped Paper Basket Material: Aluminum Surround Material: 2.25" Rubber Spider Material: Nomex Magnet Weight: 120oz. Voice Coil: Dual Free-Air Resonance (Fs): 28.15Hz Mechanical Dampening (Qms): 6.297 Electrical Dampening (Qes): .742 Total System Dampening (Qts): .663 Voice Coil DC Resistance (Re): 5.6 Ohms (Dual) Equivalent Acoustic Volume (Vas): 74.504 Liters Effective Diaphragm Area (Sd): 49.087 sq. meter Linear Coil Excursion (Xmax): 12.5mm Half Space Output Level (SPL): 88dB Energy Bandwidth Product (EBP): 43 Mass of the Moving System (Mms): 114.656 grams

The enclosure and amp rack was professionally built by the guys at Sound Theory in Mississauga.





Thanks for viewing.

Acuraluvr

iTrader: (2)

man... if i had the $$... nice system

xenolite

Thanks.

Bump

Wisc Badger

bump for a killer set up

i'd be interested in the sub and PA4001 amp only.

anychance you'd want to split them up and try and sell the enclosure and other amp seperatly?

PM me