JMillerUA6

iTrader: (1)

Category: Accessories
Price: $2000
Private or Vendor Listing: Private Listing
Part Fits (you may select multiples): Other Honda/Acura
Location (State/Prov/Terr): VA
Item Condition: Used

Did you ever try posting this up on 6GA? Don't know how successful you'll be but it might be worth a shot. Yours is priced lower than Steve's.

Bump for a good guy with a clean 6G Accord.

brian6speed

iTrader: (5)

If he really did have family missing I would be sorry, but I dont see how I can buy that. He has done this multiple times in the past and those were all before the japan thing. Somehow I feel he is trashy enough to use that as an excuse.
Not to mention if people were missing why would he contact you about getting banned, but not contact or meet people he had planned to for a purchase makes no sense. He is just wasting peoples time.


btw good luck with your sale.

99v6sedan

^Good call, he flaked out on me on christmas eve so that was looooooooooooong before this whole japan thing.

Thanks. its posted on v 6 p, 6thgenaccord, hondatech, and here. no luck yet. thats why im starting to get extremely frustrated.

Ron A

That's why I posted his reply without comment. You guys know the time line better than I do and I expected you would let us know if there was any discrepancy.

JDMCRX

I may be interested in this kit pending my tax refund.

99v6sedan

^good shit. lmk.

doneACCORDingly

iTrader: (4)

So If i purchased what else is needed to make it work on a j32a2?
I can fab a elbow myself and will run a small intercooler and fab piping,so i don't need a air box or box parts, just need an idea of what parts it will need from Comptech or any other source. And any tuning and fuel parts? My understanding is the Unichip you have will not work with the j32a2 ecu..

BTW , very interested (for my egv6 build)

99v6sedan

^let me dig up my email from CT engineering and get back to you. the directions on my unichip says its for a 98-00 accord and also lists the 3.2 tl/cl.

doneACCORDingly

iTrader: (4)

Hum, makes since but I wasn't sure if it was for the a2 engine or not..
Let me know what you find and if I can get a good grasp on what else is needed I may be interested.


Btw I'm not trying to be one of these forum members mentioned in earlier replys,aka wasting you time.
Just need more info like anyone else that would drop a stack on boost.
Thanks...

99v6sedan

Here are all the parts and part numbers from CT Engineering for the Comptech Supercharger for the Accord, and CLS/TLS auto trans. I had my engine builder look over the 2 lists and this is what he said:

Here are that parts to adapt a AV6 SC to the J35A4, these are from the CL-S/TL-S
auto kit.

355-101F
355-103F

Im assuming that these are the parts needed for anyone wanting to convert this kit to a CLS/TLS. Im not 100% sure if anything else is needed. I also have installation instructions for both the accord and TLS/CLS install. I really hope this helps at least a little bit. Below is CTenginerings email, if you want to email them to be sure feel free and let me know if youre still interested.

info@ct-engineering.com


CLS/TLS Auto trans
Supercharger Checklist

�� Main Blower Kit (355-200)
�� Supercharger Kit Number 350-062

□ Blower w/ driveshaft ID#_______________ 355-107
□ Drive Woodruff Key 355-107-3
□ Pulley Nut 355-107-2
□ Pulley Hardened Washer 355-121T
□ Blower Pulley (4”) 355-119
□ Drive Shaft Mount 355-111
□ Main Mount 355-110
□ (4) Blower Mt. SHCS (6x35) 802-2011
□ Main Mount Adj. Bobbin 355-122
□ Tensioner Plate 355-113
□ (2) Tensioner Plate Bolts (8 x 35) 800-3019
□ Tensioner Pulley 352-070
□ Tensioner Spacer (Long) 355-114
□ Tensioner Spacer (Short 355-115
□ Tensioner Bolt (LH thread) 800-8019
□ Blower Inlet Manifold 355-101F
□ Blower Inlet Manifold O-Ring 805-025
□ (3) Inlet Mount Bolts (8 x 20) 800-3003
□ Inlet Mount Stud (8 x 25) 801-1020
□ Inlet Mount Nut (8mm) 803-1020
□ Blower Outlet Manifold 355-100F
□ Manifold O-Ring 805-024
□ (5) Blower Outlet Mt Bolts (8 x 20) 800-3003
□ Blower Support Bracket 355-118
□ Blower Support Bolt (8 x 40) 800-3017
�� Intake Manifold Kit (355-211)
□ Intake Manifold Inlet Elbow 355-103F
□ Bypass Valve Vacuum Barb Fitting 354-116
□ Port Block-off Bolt (10/32 x 5/16) 802-6020
□ Washer, 10-32 NAS SS (Thick) 804-0110
□ Silicone hose (3” diam x 2” long) 811-009
□ (2) Hose Clamps (#48) 812-022
□ Intake Bolt (8x75) 800-3018
□ (3) Intake Elbow Bolts (8x25) 800-3016
□ MAP Sensor Block-off Plate 352-068
□ MAP Block-Off O-Ring 805-001
□ (2) MAP Block-Off Scews (4x16) 802-1004
�� TCS Adaptor Kit (355-217)
□ TCS Cast Intake Elbow (w/Fittings) (355-105F)
□ Elbow, T/B to T/B 355-105
□ Fitting, 10mm Trac Control 355-130
□ Fitting, 13mm Trac Control 355-131
□ 3” to 3” Rubber Bellow 811-017
□ Silicone Hose (3” diam x 2” long) 811-009
□ (3) TCS Bolts (8 x 50) 800-3015
□ TCS Elbow O-ring 805-026
�� Alternator Drive Kit (355-212)
□ Alternator Pulley (3.0”) 355-135
□ Alternator Blower Mount 355-112
□ Drive Belt (#4040252) 350-058
□ Long Alternator Shaft Spacer 355-120
□ (2) Intake Elbow bolts (8x25) 800-3016
�� Fuel Pressure Regulator (Automatic) (360-020-7)
(Refer to Drawing for Parts)
�� General Parts Kit (355-213)
□ Fuel Pump 360-010
□ FPR Mtg Bolt (6x14) 800-2002H
□ Battery Box Assembly 355-124A
□ Battery Hold Down 710-050CLR
□ Battery Clamp Bolt (6x75) 800-2011
□ Radiator Overflow Bottle 355-126
□ Upper Radiator Hose 355-155
□ P/S Reservoir Bracket 355-128
□ ESM Unit V6 - preset to 2.80 v 340-055
□ (2) cam seal bolts (8 x 30) 800-3006
□ Adj. Bobbin bolt (10 x 40) 800-4017
□ Cam Seal O-ring 805-022
□ EGR valve gasket (PGE) 805-027
□ (2) Throttle body gasket 901-152
□ (6) Denso IK 22 Spark Plugs 806-040
□ Modified Fan shroud (Prod. Entry?) 901-158M
□ (3) Fan Shroud Screws (5x25) 800-1001
□ (3) Fan Motor spacers 355-137
�� Ice Box Kit 300-130
�� Fuel System Adapter Kit (355-214)
□ 12mm > AN6 Adaptor w/Washer 813-005
□ Push on Hose End (-4AN) 814-308
□ Fuel return hose (5/16” x 7.5”) 811-001-7.5”
□ (2) Fuel Line Hose Clamp #4 812-009
□ AN Fuel Hose(-6 90° x 12”) (816-014)
□ Push-on Hose -6 Black 12” 814-323-12”
□ (2) Push-on Hose End (-6 90°) 814-322
�� Hose Kit (355-215)
□ Coolant Bottle Hose (5/16” x 10”) 811-001-10”
□ T/B Water Hose (5/16” x 10.5”) 811-001-10.5”
□ T/B Water Hose (5/16” x 17”) 811-001-17”
□ TCS Water Hose (5/16” x 24”) 811-001-24”
□ TCS Water Hose (5/16” x 27”) 811-001-27”
□ Solenoid Vacuum Hose (5/16” x 36”) 811-001-36”
□ Bypass Valve Vacuum Hose (6.5”) 811-002-6.5”
□ FPR Vacuum Hose (9”) 811-002-9”
□ Valve Cover Vent Hose (1/2” x 19”) 811-020-19”
�� Documentation Kit (355-216)
□ ESM Installation Instructions INS-091
□ Instruction Sheet INS-125
□ CARB sticker 730-116
□ Warranty Card 099 Warranty
□ (2) CTE Decal (Small) 730-109


Accord V6 Supercharger Check List
□ 1998-1999 □ 2000-2002

(98-99) Supercharger Kit Number 350-060
(00-02) Supercharger Kit Number 350-063
�� Main Blower Kit (355-200)
□ Blower w/ driveshaft ID#_______________ 355-107
□ Drive Woodruff Key 355-107-3
□ Pulley Nut 355-107-2
□ Pulley Hardened Washer 355-121T
□ Blower Pulley (4”) 355-119
□ Drive Shaft Mount 355-111
□ Main Mount 355-110
□ (4) Blower Mt. SHCS (6x35) 802-2011
□ Main Mount Adj. Bobbin 355-122
□ Tensioner Plate 355-113
□ (2) Tensioner Plate Bolts (8 x 35) 800-3019
□ Tensioner Pulley 352-070
□ Tensioner Spacer (Long) 355-114
□ Tensioner Spacer (Short 355-115
□ Tensioner Bolt (LH thread) 800-8019
□ Blower Inlet Manifold 355-101F
□ Blower Inlet Manifold O-Ring 805-025
□ (3) Inlet Mount Bolts (8 x 20) 800-3003
□ Inlet Mount Stud (8 x 25) 801-1020
□ Inlet Mount Nut (8mm) 803-1020
□ Blower Outlet Manifold 355-100F
□ Manifold O-Ring 805-024
□ (5) Blower Outlet Mt Bolts (8 x 20) 800-3003
□ Blower Support Bracket 355-118
□ Blower Support Bolt (8 x 40) 800-3017
�� Intake Manifold Kit (355-201)
□ Intake Manifold Inlet Elbow 355-102F
□ Bypass Vlave Vacuum Barb Fitting 354-116
□ Spare Port Blockoff Bolt (10/32 x 5/16) 802-6020
□ Spare Port Blockoff Washer 804-0110
□ Silicone Hose (3” diam x 2” long) 811-009
□ (2) #48 Hose Clamps 812-022
□ (4) Mounting Bolts (8 x 25) 800-3016
□ MAP Sensor Blockoff Plate 352-068
□ MAP Sensor Blockoff O-Ring 805-001
□ 2 MAP Sensor Blockoff Screws (4x16) 802-1004
�� Alternator Drive Kit (355-202)
□ Alt/Blower Pulley - 2.8” 355-123
□ Long Alternator Shaft Spacer 355-120
□ Alt/Blower Mount - Steel 355-112
□ (2) Blower Mount Bolts (8x25) 800-3016
□ Drive Belt (#4040245) 350-059
�� Fuel Pressure Regulator (360-020-6)
(Refer to Drawing for Parts)
�� V-6 Accord General Parts Kit (355-203)
□ Washer Bolt (6x14mm) 800-2002H
□ Fuel Pump 360-010
□ Battery Box 355-124A
□ Battery Hold Down 710-050CLR
□ Flange Bolt (6x75mm) 800-2011
□ Radiator Overflow Bottle 355-126
□ Upper Radiator Hose 355-155
□ P/S resevoir bracket 355-128
□ ESM Unit V6 - preset to 2.8v 340-055
□ Adj. Bobbin Bolt (10 x 40mm) 800-4017
□ (2) Cam Seal Bolts (8 x 30mm) 800-3006
□ Cam Seal O-Ring 805-022
□ EGR Valve Gasket 805-027
□ (2) Throttle Body Gaskets 900-970
□ (6) Denso IK 22 Spark Plugs 806-040
�� Icebox Kit 300-130
□ Elbow with vent hose (plastic) 300-054-2
□ 3” to 2.5” rubber flex bellows 811-029
�� Fuel System Adapter Kit (355-204)
□ 12mm to –6AN Adapter w/ Washer 813-005
□ Push-on Hose End (-4AN) 814-308
□ Return Hose (5/16” x 7.5”) 811-001-7.5”
□ (2) Fuel Line Hose Clamp 812-009
�� V-6 Accord Hose Kit (355-205)
□ Coolant Bottle Hose (5/16” x 10”) 811-001-10”
□ T/B Water Line (5/16” x 10.5”) 811-001-10.5”
□ T/B Water Line (5/16” x 17”) 811-001-17”
□ Bypass Valve Vacuum Line (3.5mm x 6.5”) 811-002-6.5”
□ FPR Vacuum Line (3.5mm x 9”) 811-002-9”
□ Valve Cover Vent Hose (1/2” x 19”) 811-020-19”
�� V-6 Accord Sub-kit - Select one:
□ For ‘98 - ’99 Accord: (355-207)
□ Fuel line (816-013)
□ Push-on Hose –6 Black (24”) 814-323-24”
□ Push-on Hose End (45° -6) 814-324
□ Push-on Hose End (90° -6) 814-322
□ T/B to Air Assist vacuum line (3.5mm x 20”) 811-002-20”
□ For ‘00 - “02 Accord: (816-014)
□ Push-on Hose -6 Black 12” 814-323-12”
□ (2) Push-on Hose End (-6 90°) 814-322
�� V-6 Accord Document Kit (355-206)
□ Instructions - ESM INS-091
□ Instructions - Accord S/C INS-094
□ CARB Sticker 730-116
□ Warranty Card 099-Warranty
□ (2) CTE Decals (Small) 730-109

doneACCORDingly

iTrader: (4)

So basicly the inlet and outlet elbow from the compressor, I can fab those so no big deal.
So what about the unichip??
Ok man thanks for the info , let me try to get my accord sold and ill hit you with a payment as soon as it happens. If it happens..

99v6sedan

^These are the instructons for the unichiip so as far as i know it will work for it too. I can double check for you.

doneACCORDingly

iTrader: (4)

See I knew hat i had read before that it would work but there are so many mixed signals on the forums, I researched it and it should be what I need, ok let me push this accord and ill hit you up, I lowered the price a grand to try to get it gone.
Thanks again.

99v6sedan

^thank you. to save on costs we could meet halfway between the burlington area and the VA beach area so you dont have to pay for shipping.

99v6sedan

Bump!!!

AARONSredTYPE-S

good deal, bump for you.

heyitsnickk

What is needed to make this compatible with an 05 TL? I know you posted the lists to adapt, but I didn't really understand it. Could you just briefly list which parts I need to get and/or tell me how much more it'll cost?

99v6sedan

I honestly dont know what it would take to fit an 05. sorry.

doneACCORDingly

iTrader: (4)

Still getting the money up.

99v6sedan

^keep me posted.

99v6sedan

buuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuump

StreetKA

iTrader: (8)

what parts are missing to make it fit CLS 6MT how many miles on the blower whats the condition of it ?

TL260power

Is this still up for sale? Price?

If so, then out of the whole list for the TLS, you don't have?? I saw someone wrote elbow and something else?? I need to know for sure what exactly I would need for my 02 TLS. What does the unichip do?

Ron A

Sorry, folks. The OP hasn't updated the thread since 05-20-2011, and hasn't been in the forums since 05-22-2011.

This thread is closed for lack of updates or bumps by OP.

You can send a PM if you think there's a chance, and the OP can PM me with a link to this thread if he/she wants this opened.

If you are not eligible to send PM's yet, you will have to wait and see if the thread is opened again.