MurkyRiversTL

Here the list of what I'm selling. These specs and descriptions are from the snap-on website. My price will be at the botttom of each description.
1. Pneumatic Nibbler
Description:
Pneumatic Nibbler.
Product Specifications
Stock #
AT180B
Name
Nibbler, Air
Price**
$169.95
Brand
BluePt.Mid-Tier
Air Inlet Thread Size
1/4"-18 NPT
Width/Depth of Cut
11/64" (4.37 mm)
Air Consumption, free speed, cfm (scfm) [l/min]
3.6 (26) [101.9]
Free Speed
2,000 strokes/min.
Ion Plated Punch (opt.)
AT180-30
Overall Length, inches (mm)
7 (178)
Recommended Air Pressure, psig (kPa)
90 (620)
Recommended Hose Size, inches (mm)
5/16 (8) ID Min.
Sound Level, free speed, dBa
90
Description
Nibbler
Standard Punch (incl.)
AT180-8
Cutting Capacity
16 gauge mild steel (1/16")

Asking Price: $100.00

2. Right Angle Reversible Pneumatic Drill
Description:
Rugged, reversible right angle drill gets in tight spots comfortably. Convenient one-hand push button Forward/Reverse. Rear exhaust keeps air away from the work area. Lightweight (2.53 lbs) helps avoid fatigue during prolonged use. Built-in chuck key holder keeps the key at hand for quick bit changes. Paddle style trigger for greater comfort. Ball bearing construction for longer tool life. CE Conformity.
Product Specifications
Stock #
AT811
Name
Drill, Air, Reversible, 90° Angle, 3/8" capacity (0-55 in. lb.)
Price**
$187.75
Brand
Blue Point
Air Inlet Thread Size
1/4"-18 NPT
Description
3/8" 90° Angle Rev.
Spindle Thread, inches
3/8"-24 UNF
Chuck Range, Dia., inches
1/16-3/8
Recommended Air Pressure, psig (kPa)
90 (620)
Air Consumption, average, cfm (scfm) [l/min]
3.6 (24) [93.6]
Horsepower
0.25
Free Speed, rpm
1,320
Sound Pressure Level, dBa
97.0
Sound Power Level, dBa
110.0
Torque Range, in. lb. (N•m)
0-55 (0-6.36)
Overall Length, inches (mm)
8.2 (208)
Recommended Hose Size, inches (mm)
3/8 (10) ID Min.
Replacement Chuck with Key
AT803-2
Weight, lbs. (kg)
2.53 (1.15)

Asking Price: $120.00

3. Squeeze Rivet Tool Kit
Description:
Includes PL30 Rivet Tool, a wide assortment of open and closed rivets in 3/32", 1/8", 5/32" and 3/16" sizes plus plastic storage case with individual storage compartments for rivets.
Product Specifications
Stock #
PL300
Name
Kit, Rivet Tool
Price**
$75.70
Brand
Blue Point

Asking Price: $50.00

4. Digital Tachometer
Description:
The MT139A can assist in the setting up, monitoring or repairing of energy using power plants such as gas engines, steam boilers, electric generators, diesel engines and hydro electric power plants. Applications include flywheels for correct motor speeds; belt speeds; motor shaft speeds; pulley rotations and turbine speeds. Combination contact/non-contact tachometer with Minimum (MIN), Maximum (MAX) and LAST or current reading. Non-contact operation uses photoelectric sensor and reflective tape (included). Contact measurements are taken with one of three contact adaptors: cone, concave wheel or large wheel. Current data will remain until the next reading is taken. Memory figures will remain until the next recorded reading is taken. Powered by 2 AA batteries (included) and a protective case.
Ranges:
Photo Tach: 5 – 30,000 RPM
Contact Tach: 0.5 – 19,999 RPM
Surface Speed: 0.2 – 6,560 ft/min. or 0.5 – 1,999 m/min.
Product Specifications
Stock #
MT139A
Name
Tachometer, Digital
Price**
$329.55

Asking Price: $200.00

I have never used any of these tools. They have some scratches and blemishes from me moving so many times and being in my garage with other tools. Pics will be provided upon request by email, my computer is down and I'm using my phone to post this. Some of these tools are blue-point brand. For those that don't know blue-point tools are made by snap-on. The drill and nibbler do not have original box, but do have original paperwork, and have not been registered for warranty yet. The other tools still have original packaging and paperwork. The digital tachometer case has a 3 inch slit from opening shipping box with a razor.

Thanks for looking.

MurkyRiversTL

Oh yeah I forgot....
These prices include the cost of shipping, and I only accept payment through paypal. I will ship by UPS either same or next business day depending on time of cleared payment. Will provide tracking numbers also.

vzuptnguyen

wth? were u a aviation mechanic or a sheet metal worker? haha, good luck with sale man. see you next meet.

MurkyRiversTL

That's funny. I was both. A structures mechanic, fixing helicopters in the military. Now I'm just an aircraft mech. No more sheet metal. When is the next meet. I have way more mods now, then I did then.

MurkyRiversTL

bump.

MurkyRiversTL

Mods please close items going on ebay.