AcraAdi93

Category: Drivetrain
Price: $2300
Private or Vendor Listing: Private Listing
Part Fits (you may select multiples): CL 2G, TL 2G
Location (State/Prov/Terr): IL
Item Condition: Brand New

Alright, I have quite an amount of some parts that are practically brand new never opened from the box. I would like to sell everything I have together but if wanted to buy separate then I shall. I don't have all the parts but I can say I have about half of what you need to get it going. Note that everything is brand new in the box except for the transmission (74k miles) and the cluster (120k miles). Here is a list of parts for everything that was made and the ones I put check down next to it are the parts I got.

Well I finally threw together a parts list. There were some misc bolts used, but i got a bunch of them from the local hardware store grade 8s)


Engine. J32A2 If needing a new engine look for a CLs-6 motor (if not see below *)
03 CLs-6 speed manual. (CHECK)
03 CLs-6 Manual Engine Harness. 32110-PGE-A11
03 CLs 6 speed ECU
03 CLs-6 Flywheel 22100-PGE-026
03 CLs-6 Flywheel bolts (Qty 8) 90011-PGE-000 (CHECK)
03 CLs-6 Clutch Assembly 22105-PGE-305 (unfortunately right now there arent many options for aftermarket clutches)
03 CLs-6 Rear Engine mount and bracket 50810-S3M-A01, 50827-S3M-A00, BOLT (m12X25) 90166-S3M-A00
03 CLs-6 Rear and Front Engine Dampener and bracket (i would recommend aftermarket here)
03 CLs-6 Shifter and cables. 54100-S3M-A01, 54310-S3M-A01
03 CLs-6 Starter 31200-PGE-A11 (try to locate used, its expensive)
03 CLs-6 Gauges (CHECK)
03 CLs-6 Hydraulic Clutch lines. 46960-S3M-A01, & 46970-S3M-A01 (CHECK)
03 CLs-6 Trans mounts (2 of them) 50806-S3M-A03, 50805-S3M-A03
03 CLs-6 Cup Holder 77230-S3M-A01ZA (CHECK)
03 CLs-6 Parking brake 47105-S3M-A04ZA and to go with it,
Spring 47537-671-670, Nut 47522-594-000, Equalizer pin 47365-538-000, Equalizer 47360-SB2-000 (CHECK)


*If you use the J32A2 from the Auto you will need these parts (all from the CLs-6)

Front cam pulley 14260-PGE-A11
Front plate assembly (behind cam pulley) 11860-PGE-A10 (CHECK)
Timing belt pulley(lower) 13621-PGE-A11
Crank shaft sensor 37500-PGE-A11 (CHECK)
Subharness for CKP 37501-PGE-A10
TDC Sensors (Qty 2) 37840-PGE-A11
TDC SUB HARNESS 37841-PGE-A10 (CHECK)



If you dont already have the Type-s you will want the IMRC 37850-PGE-A01

Brake/Gas pedal assembly from either the accord or CLs-6. (i modified mine)
If you decide to buy it new BRAKE PEDAL ASSY 46600-S3M-A51 (CHECK)

Clutch pedal. (this can be from a few cars, i took mine from a 90s civic. it was almost a direct bolt in.
It uses 3 points to bolt in only 2 lined up. I modified a bolt and shim to make it bolt up in the 3rd spot)

If you decide to buy it new you will need the pedal and mount CLUTCH PEDAL 46910-S3M-A01 & CLUTCH PEDAL BRACKET 46990-S84-A01
MASTER CYLINDER ASSY 46922-S3M-A01 & Clutch Fluid Tank 46965-S5A-013, & Clutch Hose 46961-S3M-A02
(i used the one from the civic i pulled the clutch pedal out of)

Things im not sure if you will need but i bought.

Relay box assembly (under hood) 38250-S3M-A22
Shift Boot 83414-S3M-A01ZA
Shift Knob 54102-SL0-023ZB

If you have a header you will either have to have the XS header or COmptech header for the manual. Other wise it wont fit
You will be able to reuse the stock manifolds

If you already have a Type-s you MAY Not need these????
Right side cabin to engine comp harness 32100-S3M-A12
Left side cabin to engine comp harness 32120-S3M-A20

I Would attempt with out (that i bought and used with out trying without first) It will make not having to do all the rewiring of
that i did.
Upper instrument harness 32117-S3M-A31
Lower dash harness 32150-S3M-A32

$2300 for everything is what I am looking for. I am open to offers. No trades because I am selling the TL next year and want to buy a different car. If interested you can message me or reply here. Thanks for looking

Ron A

Per Rule B of THE BLACK MARKET RULES: Please furnish a reason for selling, and where you got it from (unless previously posted), for each BRAND NEW item posted for sale.

AcraAdi93

I got these parts from an Acura/Honda warehouse brand new except for the cluster bought from a junkyard that has 120k miles, and transmission has 74k miles on it bought off of craigslist in a different state. Reason I am selling is that I want to get a different car next year and need to make some room and collect money towards new car and don't have time

AcraAdi93

Not really in a rush to sell but if I don't find a buyer anytime soon then I will probably continue buying parts and swap it..

DEPTLS

iTrader: (6)

if you have that much stuff... just swap it.... Its worth it... i love mine!

AcraAdi93

Alright I'm keeping the swap.. Moderator please close thread. Items no longer for sale