proimport

Category: Engine - Exhaust
Price: $600
Private or Vendor Listing: Private Listing
Part Fits (you may select multiples): TL 3G
Location (State/Prov/Terr): VA
Item Condition: Used

atlp quad v2 non resontor cat back exhaust $600obo also need your 07/08 oem tls exhaust please be local

ff type 1 v2 $350 obo or trade for eibach or h&r lowering springs and some cash

if you want pics please let me know

you can pm, call or text me
571.232.3138

rossv1

If you were closer I'd buy the exhaust.

Bruce Banner

iTrader: (2)

I'd buy it if he didn't need a TLS in return

slogsr

iTrader: (2)

So tempting, I am in the area and have a type s exhaust to hand over. How firm is that price?

alex|WILLIAM

Interested in the ATLP have stock type s however im not local, but might be able to ship via family transport business

bforbrian

iTrader: (11)

Where in VA?

slogsr

iTrader: (2)

Judging by the area code 571 he is in Northern VA.

OP I am in Vienna, how firm is your price?

nguyendm3

iTrader: (2)

Pm'd

proimport

Update the exhaust and suspension are both pending if anything changes I will update everybody and go down the list thank u

quanaman

iTrader: (4)

Wow! Quick! I'm tempted also; got exhaust to trade too...

proimport

Update ff type 1 v2 r up for grabs

stellarsteve90

are the ff v2 damper ajustable?

Noober

iTrader: (7)

^ yes

insxtc

I have some h&r on my TL now would trade.

steel619

iTrader: (2)

pm'd

The MuffinMan

iTrader: (1)

Would you do 300 picked up for the coils?

proimport

pmd and text everybody back
ff r pending if anything changes i will update everybody thanks

aznandy26

i have some eiback prokit lowering springs to trade with you let me know! ill add cash on top PM me! lets talk if others dont go thru.

96cd5

Sorry fella's f&f's are sold to me!

proimport

update ff r sold to 96cd5

proimport

update atlp exhaust is pending anything changes i will let everybody know thanks

styles109

iTrader: (4)

Why are you so farrrr

batman21

if only i had seen this post earlier i wouldve been all over that exhaust. if it falls through let me know. i have type s exhaust and shop where we can swap out.

proimport

would have made my life easier too

proimport

i should be asking u the same question

proimport

sent them out to u today let me know when u get them

batman21

If you deal falls through, hit me up so we can knock this out one day after work

proimport

Update the Atlp quad is up for grabs

SharksBreath

iTrader: (33)

attention everyone, be VERY wary of this seller. i had planned for almost 2 weeks to meet up with him and the potential buyer (to help with install, provide garage) and at the last minute the seller backed out. his excuse was that the type-s exhaust he was trading for was "rusted" from previous welds...which is entirely false. i have seen the type-s exhaust in person many times and its perfectly fine.

seller was even offered gas money for making the 90 minute trip to us, and had the audacity to ask for MORE money on top of what we already agreed upon.

just a warning/heads up to potential buyers, tread lightly around this guy.

bmore07tls

^^^+1. After 2 weeks of being led on he backed out the day before because of a weld "that gave him a gut feeling" sorry but my magnaflow was welded on by an exhaust shop (not in my driveway) who does exhaust for a living just 2 months ago. I informed him of the mid muffler delete and magnaflow muffler replacing stock resonator from the first message I sent and everything was a go, then backed out at last minute with a change of heart.
The moral of the story is.....buyers don't get your hopes up!! If ur exhaust is showroom new u won't be consideres

Ron A

Waiting for a reply from OP.

96cd5

I bought the F&F's and they arrived today and were VERY well packaged and clean. Thanks OP!

proimport

got his pics and after getting his close up and last pic i changed my mind due to rust around the welds got a bad feeling about his exhaust set up so i told him i was sorry i know it was not cool due to last min change

proimport

np 96cd5 good doing business with u

SharksBreath

iTrader: (33)

here is the close up picture showing "rust around the welds".



whenever you cut a piece of metal, and re-weld it, you will have weld spots. the type-s exhaust that was going to be traded had a mm delete and magnaflow resonator in place of the OEM res...which pro import knew about from the get go, and was fine with.

the above picture is a shining example of a MIG weld job that was done correctly. it is literally just a small adapter/reducer welded onto the exhaust. MIG is wire-feed and so it adds material to the pieces being welded. it is better for filling areas or adding superior strength. if the material surrounding the weld can take the heat and/or doesn't matter if it is deformed or discolored, then MIG welding is the way to go over TIG welding.

anyone who gets something welded onto their exhaust is getting it MIG welded, and that is how it is supposed to look. they aren't "rust spots" they are just wire-feed welds.

my exhaust looks the exact same way after i had my resonator welded on. it's not supposed to be pretty, it's supposed to get the job done and last a very long time.

i know this post won't get me anywhere or even help, but it's important for people to know what they're looking at before they make assumptions. if you don't know what a MIG weld looks like, then don't be arrogant and say it's "rust".

bmore07tls

I couldn't have said it better! I see no rust, I see a 2 month old weld. Oh well what can u do? You can't prove someone wrong when they are ignorant to what they are looking at or just give u a bullshit excuse. Ill never know the case but at least potential buyers can be warned on who they are dealing with. I didn't appreciate being dicked around! 2 people had to go thru alot of trouble (and take heat from our fiances) to get this scheduled. I kno that's not his problem but when people change there whole weekend around for a final result of nothing, it's gonna piss some people off.

proimport

Sold
Please close