3rd and 4th Gear A/T Transmission Sensors for 04-06 TL + washers + Acura ATF
08-24-2009, 08:42 PM
#1
Chapter Leader (NY/NJ)
Thread Starter
iTrader: (10)
3rd and 4th Gear A/T Transmission Sensors for 04-06 TL + washers + Acura ATF
3rd and 4th gear solenoids for 04-06 TL A/T transmissions. Never installed and now i dont need. comes with 4 washers and 3 bottles of Acura ATF
From AcuraOEMParts.com
each solenoid is 33.06 plus washers
plus 3 bottles of Acura ATF at est. 7 bucks each
plus tax so estimated cost of all this is over 90 plus shipping.
MY PRICE IS 80 SHIPPED!!
if you dont know what this is for read this thread!
https://acurazine.com/forums/showthread.php?t=721508
and the EASY DIY
https://acurazine.com/forums/showthread.php?t=729149
From AcuraOEMParts.com
each solenoid is 33.06 plus washers
plus 3 bottles of Acura ATF at est. 7 bucks each
plus tax so estimated cost of all this is over 90 plus shipping.
MY PRICE IS 80 SHIPPED!!
if you dont know what this is for read this thread!
https://acurazine.com/forums/showthread.php?t=721508
and the EASY DIY
https://acurazine.com/forums/showthread.php?t=729149
08-30-2009, 11:52 PM
#5
Chapter Leader (Southern Region)
damn this is a good deal.. I don't get the sig part.. you still have an A/T TL right? btw.. what are you doing to the M/T.. turbo? 
08-31-2009, 12:09 AM
#7
Chapter Leader (Southern Region)
Trending Topics
08-31-2009, 12:11 AM
#8
Chapter Leader (NY/NJ)
Thread Starter
iTrader: (10)
hes got the wrong part numbers. those are for a 2G TL.
this is Majofo post #10 in the DIY
Quote:
Originally Posted by sixsixfour
Since there is no formal guide other than the one in the service manual, I decided to document the replacement of my 3rd and 4th gear pressure switches.
For the record, my transmission has about 35,xxx miles at the time and I am the first owner. The shift quality is decent, I haven't noticed anything unusual other than 3rd gear holding on steep inclines under load. I just recently did a 1x1 drain/refill of the transmission fluid at an Acura dealer as well (about 1K miles ago prior).
Materials needed:
x1 3rd Gear Pressure Switch (28600-P7Z-003)
x1 4th Gear Pressure Switch (28600-P7W-003)
x2 sealing gasket (90471-PW7-A00)
x1 brake cleaner (to wash away residual AT fluid)
Hey bud.. nice write up... but,
Those are the wrong P/N's.. Those go to 2G TL's the 1G MDX ('01-'02) and 1 & 2G CL..
I'm not sure on the specs of those pressure switches but the rating for the 3rd Gear should 33psi and the 4th gear is 27psi.. I believe the colors are black/ grey & beige.
The correct P/N for the 3G TL should be:
04-06 TL (Texas Instruments, TI)
05-08 RL
07-09+ RDX
03-09+ MDX
07-08 TL (Washimiya?)
this is Majofo post #10 in the DIY
Quote:
Originally Posted by sixsixfour
Since there is no formal guide other than the one in the service manual, I decided to document the replacement of my 3rd and 4th gear pressure switches.
For the record, my transmission has about 35,xxx miles at the time and I am the first owner. The shift quality is decent, I haven't noticed anything unusual other than 3rd gear holding on steep inclines under load. I just recently did a 1x1 drain/refill of the transmission fluid at an Acura dealer as well (about 1K miles ago prior).
Materials needed:
x1 3rd Gear Pressure Switch (28600-P7Z-003)
x1 4th Gear Pressure Switch (28600-P7W-003)
x2 sealing gasket (90471-PW7-A00)
x1 brake cleaner (to wash away residual AT fluid)
Hey bud.. nice write up... but,
Those are the wrong P/N's.. Those go to 2G TL's the 1G MDX ('01-'02) and 1 & 2G CL..
I'm not sure on the specs of those pressure switches but the rating for the 3rd Gear should 33psi and the 4th gear is 27psi.. I believe the colors are black/ grey & beige.
The correct P/N for the 3G TL should be:
04-06 TL (Texas Instruments, TI)
28610-RAY-003
28600-RAY-003
also compatible with 28600-RAY-003
05-08 RL
07-09+ RDX
03-09+ MDX
07-08 TL (Washimiya?)
28610-RKE-004
28600-RKE-004
Edit: Don't panic.. just because those pressure sensors / switches go to the gen of crap transmissions doesn't mean they aren't good, the transmission design itself was poor.. but the specs may be different.. I'd change them out and flea bay those if you can't return them.
28600-RKE-004
08-31-2009, 10:27 AM
#10
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
you got PM !!!
08-31-2009, 03:03 PM
#11
Chapter Leader (NY/NJ)
Thread Starter
iTrader: (10)
as for the M/t. only time will tell....
swoosh got first dibs then maxAmillion as per order i received PM's.
08-31-2009, 03:10 PM
#12
Chapter Leader (Southern Region)
08-31-2009, 03:24 PM
#13
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
money send !!!!
Thread
Thread Starter
Forum
Replies
Last Post
mada51589
3G TL Problems & Fixes
79
05-03-2022 08:54 PM
orkoTL
4G TL Problems & Fixes
107
09-28-2017 09:12 AM
nanos
Car Parts for Sale
26
11-12-2015 08:41 PM
Skirmich
2G TL (1999-2003)
37
09-15-2015 06:41 PM
Mike Bertram
2G TL (1999-2003)
9
09-10-2015 09:27 AM
03, 2005, 28600p7w003, 28600ray003, 4th, acura, acurazine, gear, issue, mdx, pressure, rsx, switch, tl, transmission
