3G TL: Tein, Comptech, AEM, E-Shift & more (No 56k)
12-16-2008, 09:31 PM
#1
Advanced
Thread Starter
3G TL: Tein, Comptech, AEM, E-Shift & more (No 56k)
Recently sold my car and got a GS350 AWD and this is what I have left. Lexus is a great car, but I sort of regret the trade as I really miss the TL. Been pushing for the G/F to trade her g35 in for a TL, so I can throw all the parts on there, but don't think that will happen.
The parts are all in really good condition. Get these in time for Christmas. All prices are shipped unless you live in Hawaii or Alaska, or north of the border Canada.
David (types-09) and Nicholas (Drvn2modfy) can both vouch for me as I have dealt with them in selling high priced items such as a Comptech S/C and Iforged wheels.
Prefer to sell locally, but not too many Acurazine members live in Kansas City
Since I am out of school for the semester, I work more so I can't get online as often. The best way to reach me would be via my cell at (913)636-9540 or text. I will respond to messages ASAP
If someone wants all the parts, pm me and we can work something out. As usual, I will cover all shipping fees
Tein Super Street Coilovers
- Used for approx 20k
- Mint Condition. Still looks new. Look at the pics and you'll agree
- No leaks and still rides as the same day it was installed
- Comes with everything including the gold pieces installed under the top hat (not pictured), no top hats as you use your stock ones
- $650 shipped
Here is a pic of them on my car
- Strut 1
- Strut 2
- Strut 3
- Strut 4
Comptech Exhaust
- Purchased new, but sort of modified it.
- Stainless steel and sounds great. No drone whatsoever and sounds like a raped monkey if you get on the car
-8/10 Condition. Has all the clamps and you use the stock rubber hangers
- The axlebacks and Y pipe is genuine Comptech, but the midpipe is custom with a 22" Magnaflow resonator. Did this because my car was dumped on the teins, causing me to hit a dip in the road, which punctured a whole in the midpipe. I didn't want to have it re-welded so I had a whole new midpipe made. The dip also caused me to scrape the tip of the right muffler and pushed it to the right a bit. It can be fixed easily and bent back into place if you take it to a muffler shop.
- Midpipe was sawed off, but can easily be rewelded and you have a good exhaust. Midpipe was over $100, but don't remember exactly
- If you don't want the midpipe, I can sell it for $100 less, but really don't need it
- $550 shipped.
- The midpipe (long pipe in the back is the custom one) Not COMPTECH. Everything else is
Pics of the Scrape and slight push of the tip to the right. Scrape is on bottom
E-Shift ProCats
- Purchased for $1100 new
- Used for approx 15k.
- Still in great condition. I did not experience the problem as the other members did with them, as the shrapnel on my set did not deteriorate at all
- Probably the best 1100 investment I made on the car, besides the coilovers
- This will show some serious gains. I never dynoed, but the car ran different after I put them on. It made my car break loose on 255 wide BFG KDW's in 3rd gear. I beat my friends AP2 s2k after I threw them on, when I couldn't beat him before the pro-cats (No joke)
- $650 shipped
- Notice that the shrapnel is still in there
SPC Rear Camber Kit
- Absolute must if you are lowered more than 2"
- Rubber bushing around the end link is torn a bit, but it doesn't affect the function of the camber kit.
- Had to leave the front on, because the kit was pressed in and I couldn't take it out
- $110 shipped
Unorthodox Racing Stock Sized Underdrive Pulley
- Still looks new
- I will include the belt
- Paid $190 shipped through excelerate, but I'm including the belt which is an extra $30.
- $180 shipped to compensate for the belt
AEM Intake (Red)
- Has a few scratches, but no holes and still works great. There is an indent underneath (not serious and I forget to take pictures of it), but it is only cosmetic
- Throaty sound
- Air Filter is in great condition, but the fins aren't straight, because I cleaned it every oil change and it was a bitch to take it out w/o taking off the bumper
- $130 shipped
Tein EDFC
- Allows for dampening adjustment on how smooth or rough you want the car to ride
- Paid $300 new for it
- Works great. The rubber housing around one of the wire harnesses is corroded a bit, but the actual wires are fine and it still works. Don't know why, but it came this way when I took them out. You don't notice it, because all the wires are tucked underneath the panels, seats, etc.
- $150 shipped
Comptech RSB
- 22mm thick. Looks so big compared to the dinky 6MT one, which is only 2mm smaller
- $75 shipped
- Stock 6MT one I will let go for $35, but I really don't want to ship it, as it will cost that much to ship it anyways. Prefer local sale
The parts are all in really good condition. Get these in time for Christmas. All prices are shipped unless you live in Hawaii or Alaska, or north of the border Canada.
David (types-09) and Nicholas (Drvn2modfy) can both vouch for me as I have dealt with them in selling high priced items such as a Comptech S/C and Iforged wheels.
Prefer to sell locally, but not too many Acurazine members live in Kansas City
Since I am out of school for the semester, I work more so I can't get online as often. The best way to reach me would be via my cell at (913)636-9540 or text. I will respond to messages ASAP
If someone wants all the parts, pm me and we can work something out. As usual, I will cover all shipping fees
Tein Super Street Coilovers
- Used for approx 20k
- Mint Condition. Still looks new. Look at the pics and you'll agree
- No leaks and still rides as the same day it was installed
- Comes with everything including the gold pieces installed under the top hat (not pictured), no top hats as you use your stock ones
- $650 shipped
Here is a pic of them on my car
- Strut 1
- Strut 2
- Strut 3
- Strut 4
Comptech Exhaust
- Purchased new, but sort of modified it.
- Stainless steel and sounds great. No drone whatsoever and sounds like a raped monkey if you get on the car
-8/10 Condition. Has all the clamps and you use the stock rubber hangers
- The axlebacks and Y pipe is genuine Comptech, but the midpipe is custom with a 22" Magnaflow resonator. Did this because my car was dumped on the teins, causing me to hit a dip in the road, which punctured a whole in the midpipe. I didn't want to have it re-welded so I had a whole new midpipe made. The dip also caused me to scrape the tip of the right muffler and pushed it to the right a bit. It can be fixed easily and bent back into place if you take it to a muffler shop.
- Midpipe was sawed off, but can easily be rewelded and you have a good exhaust. Midpipe was over $100, but don't remember exactly
- If you don't want the midpipe, I can sell it for $100 less, but really don't need it
- $550 shipped.
- The midpipe (long pipe in the back is the custom one) Not COMPTECH. Everything else is
Pics of the Scrape and slight push of the tip to the right. Scrape is on bottom
E-Shift ProCats
- Purchased for $1100 new
- Used for approx 15k.
- Still in great condition. I did not experience the problem as the other members did with them, as the shrapnel on my set did not deteriorate at all
- Probably the best 1100 investment I made on the car, besides the coilovers
- This will show some serious gains. I never dynoed, but the car ran different after I put them on. It made my car break loose on 255 wide BFG KDW's in 3rd gear. I beat my friends AP2 s2k after I threw them on, when I couldn't beat him before the pro-cats (No joke)
- $650 shipped
- Notice that the shrapnel is still in there
SPC Rear Camber Kit
- Absolute must if you are lowered more than 2"
- Rubber bushing around the end link is torn a bit, but it doesn't affect the function of the camber kit.
- Had to leave the front on, because the kit was pressed in and I couldn't take it out
- $110 shipped
Unorthodox Racing Stock Sized Underdrive Pulley
- Still looks new
- I will include the belt
- Paid $190 shipped through excelerate, but I'm including the belt which is an extra $30.
- $180 shipped to compensate for the belt
AEM Intake (Red)
- Has a few scratches, but no holes and still works great. There is an indent underneath (not serious and I forget to take pictures of it), but it is only cosmetic
- Throaty sound
- Air Filter is in great condition, but the fins aren't straight, because I cleaned it every oil change and it was a bitch to take it out w/o taking off the bumper
- $130 shipped
Tein EDFC
- Allows for dampening adjustment on how smooth or rough you want the car to ride
- Paid $300 new for it
- Works great. The rubber housing around one of the wire harnesses is corroded a bit, but the actual wires are fine and it still works. Don't know why, but it came this way when I took them out. You don't notice it, because all the wires are tucked underneath the panels, seats, etc.
- $150 shipped
Comptech RSB
- 22mm thick. Looks so big compared to the dinky 6MT one, which is only 2mm smaller
- $75 shipped
- Stock 6MT one I will let go for $35, but I really don't want to ship it, as it will cost that much to ship it anyways. Prefer local sale
12-16-2008, 10:34 PM
#3
Advanced
Thread Starter
I think so too ussi. All of my parts are around half price, with exception to the belt, but i'm including the belt
The pro-cats are a great investment for horsepower gains, over other parts, except for the S/C
The pro-cats are a great investment for horsepower gains, over other parts, except for the S/C
12-16-2008, 10:58 PM
#4
Pro
Join Date: Mar 2004
Location: Ellicott City, MD
Posts: 500
Likes: 0
Received 0 Likes
on
0 Posts
PMed bout exhaust!
12-16-2008, 11:21 PM
#5
Advanced
Thread Starter
the rubber is melted around the edfc wires is the best way for me to explain it, however the actual green, red and yellow wires, etc. are not. I ran it this way for 20k with no problems
Again guys, if you are interested, please give me a call or text at my number. I'm away from the computer a lot for the next 3 weeks
Again guys, if you are interested, please give me a call or text at my number. I'm away from the computer a lot for the next 3 weeks
12-16-2008, 11:25 PM
#6
Advanced
Thread Starter
*note* I was in the first group of people to get these pro-cats from E-shift. Bought them with my friend Alex at the same time who has a silver accord going boosted and he too never had a problem with them. Think that the guys whose cats deteriorated was a result of them being boosted, but I can't say for them
Trending Topics
12-16-2008, 11:45 PM
#8
Advanced
Thread Starter
Take my word on it. The EDFC works, but you must have the right application for it. Doesn't work on all tein ss for all cars. Tein's website shows a few edfc models and you have to get the one that matches your car with your tein suspension model. For example, my edfc didn't fit on my cousins 05 accord with tein ss-p.
If it doesn't work, let me know, and I will refund you a portion of the money, so you can purchase the wires to hook it up.
JJaber06, the edfc is a pending sale. If it doesn't fall through, you're next
If it doesn't work, let me know, and I will refund you a portion of the money, so you can purchase the wires to hook it up.
JJaber06, the edfc is a pending sale. If it doesn't fall through, you're next
12-16-2008, 11:54 PM
#10
Advanced
Thread Starter
Considering it, since a majority of the members already have the test pipe. Take 1/3 off the total for the pro-cats and you got a deal, but I'm not sure about separating it since some don't have a test pipe and will want all 3.
I will let you know JJaber06
I will let you know JJaber06
12-17-2008, 12:05 AM
#11
Advanced
Thread Starter
Hitting the sheets so any and all questions answered in the morning. If you are local, I will put all of these parts on for you for free if you buy. Suspension, I will charge a burger and beer as it takes a while
Oh c'mon, you have a Ferrari....
12-20-2008, 09:26 AM
#32
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
Dibs on the pulley can send you the payment asap, let me know.....
your area code is for Kansas, PM me and let me know if we can meet up and you can take shipping off.....!!!
your area code is for Kansas, PM me and let me know if we can meet up and you can take shipping off.....!!!
12-20-2008, 09:33 AM
#33
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
^^^ or give you hard cash !!!! when we meet up.
