Category: Engine - Intake/Fuel
Price: $0
Private or Vendor Listing: Private Listing
Part Fits (you may select multiples): CL 2G, TL 2G, Other Honda/Acura, Type-S Model
Location (State/Prov/Terr): CA
Item Condition: Used

IN NEED OF QUICK $$$, SO THIS IS JUST A MINI PART-OUT FOR NOW. LOCAL BUYERS ONLY UNTIL I DECIDE TO SHIP.

1) INJEN RD CAI ($200) - Bought this brand new back in October 2009. Still in relatively good condition. Filter is still clean. All assembly/directions included in order to mount intake. Comes in original box. Included with this purchase will be the hydroshield/pre-filter which normally retails for $40.Will only fit a CL/TL Type S.







2) NEUSPEED STRUT BAR ($80) - Bought this off another member on this forum not too long ago in January of 2010. The strut bar fits right on top of the stock strut bar on a CL/TL. The strut also fits perfectly on a 98-02 Accord.



3) XS POWER HEADERS ($100) - Bought these off a member here in November 2009, so it roughly has about 2k miles on top of 25-30k miles from original owner. The headers have no problems whatsoever (no resonance, cracks, leaks). There are a few scrapes here and there from being low but that has no effect on performance gains. Original owner had the flex pipe cut off and welded on a straight pipe for better performance. I will include the original flex pipe for free if you decide you wanna reweld the original flex pipe back on. These are RARE and discontinued!

PICS WILL BE UP ASAP WHEN THEY ARE OFF THE CAR.

4) RH C2 EVOLUTIONS ($500 obo) - Just purchased the set of rims from another member on this forum. I am selling both rims and tires for $500 obo. Tire size is 225/40/18. Rims are 18x7.5, +42 offset, 4x114.3 or 5x114.3. 3 Sunny SN3800 tires with good tread, 1 brand new Nankang NS-II with perfect tread.

Wheels have some minor scratches/scuffs, slight peelage of clear coat, no major curb rash (won't be able to tell unless you look closely/upfront). One wheel had a small crack which has been professionally repaired. All wheels hold air, comes with all lugs nuts/wheel locks/center caps, & two front wheel spacers to clear the front brake calipers.

WILL FIT A 2G CL/TL/98-02 Accord.

Tire/Rim #1


Tire/Rim #2


Tire/Rim #3


Tire/Rim #4


I am located in Rosemead, CA.

Man. Breaks my heart taking all those parts off for you man.
BUMP BUMP triple BUMP

You have PM

bumpity bump! need these gone asap. locals, where you at?

free bumppp for you. GLWS. I'll think about wheels

good luck man, i know it's a trying time for you right now.

make sure you state that the intake will not fit cl type s 6spds. they don't have VSA

thanks for the heads up.

intake WILL NOT fit a CL-S 6 spd.

Rosemead is in So Cal and ur up in Nor cal probably at least a 5-6 hour drive..

I mite pick up those headers if I come down next weekend

hit me up if you want them still. no locals have hit me up yet so you're the first.

unfortunately, San Jose is in the opposite direction of Rosemead. if you're really an interested buyer and won't flake, I'll be willing to meet you half way. everything is still up for grabs. need more local buyers!

too many people wanting me to ship right now.

PM's replied. headers will be off by tonight. pics of the headers should be up later tonight as well.

for those people PMing me about shipping and those who I have not yet replied back to .. i am not in the midst of shipping them just yet .. i will let you guys know when i decide to ship. till then, this thread remains as is, local only.

LMK when you decide to ship.

headers are finally off the car. here are some pics.

what you will receive:




notice the shaved area on the headers. this was due in part of being lowered. has no effect on performance gains at all. also, notice the straight pipe that was welded in place of the original flex pipe.

Any locals looking to make some quick cash by picking these headers up and shipping them to me!?! I will make it worth your while, I promise! My cell is 301-385-1849 or email me at bcuyun@gmail.com.
Somebody's gotta be looking for some quick easy money out in Cali right? LMK

bump.. no locals for headers? intake? strut?

must be kidding me ..

Ok... Start shipping then... At least you know you have guaranteed sales for everthing (I'm just saying...)

ttt. intake, strut, and rims still available.

i want header n bar let me see how much my check is tommorow

headers are sold. strut bar is still available though.

Consider shipping the strut bar yet? Does this model fit over top of the stock or does it replace?

yes, im getting close to shipping them. there are some locals that are interested though. so i'll see if they still want them.

and it's an upper strut bar. so it fits over the stock strut bar.

ttt. need intake gone. i'll ship if necessary. PM me.

Please keep me in mind for shipped bar.

will you part out the hydro shield? I'm up for that!

^ hm.. if no one really wants the intake, then yes. i will.

shipping for bar 02136?

sorry, but i don't have a scale as of now. but i would be guessing the bar weighs about 5lbs. im from 91770 (rosemead, ca) so you can see shipping charges. i'll probably do it via ups.

btw guys, buyer for the strut bar has flaked. still up for grabs: strut bar and intake

i'll be price negotiable on the intake now.

strut bar still available??

PM me about the strut bar shipped to 45248 (Cincinnati, Oh)

The intake will fit 03 CL-S 6 Speeds. . .I have one on my car.

sorry for the hiatus. been going through alot lately. guys.. i still have the strut bar and intake for sale. i need them gone asap!

PM me if anybody is interested.

neuspeed strut bar - 80
injen rd cai - 200 obo

Free bump for a legit seller and a great guy!
ygpm on strut bar...

does the intake fit a 2000 tl-p?

im interested in buy the bar if still available. located in san jose and willing to meet half way.

pm'ed for intake

okay guys. i know its been awhile since ive replied back to everyone's PMs. school has started and ive been busy constantly. so sorry if i did not get back to you quickly/in time.

but i needa bump this up one more time for any of you guys who want to buy the NEUSPEED STRUT BAR, i will sell it for $80. i am also looking for any LOCAL buyers. sad to say, i don't have enough money for shipping so you guys would have to cover that cost if you really want it shipped out!

let me know.. other people are selling these for $90+