Oldsman71

iTrader: (1)

Category: Accessories
Price: $1
Private or Vendor Listing: Private Listing
Part Fits (you may select multiples): CL 2G, Other Honda/Acura, Type-S Model
Location (State/Prov/Terr): KS
Item Condition: Used

I have an OEM trunk wing spoiler, Black HD trunk springs and new OEM wiring harness for a 2G CL that I decided not to put on my car. I also have a few other parts that I am replacing with new parts. All parts are plus shipping. The larger parts would be best local pickup as shipping/freight would make them priced out of reason.
Trunk wing spoiler, springs, wiring harness: $200
I will keep these together as springs and harness are hard to find

Clear LED (Genuine Honda) brake light that will fit in the wing $75

Used headlight housings. $125 for both.
The left one needs to be resealed as it would get condensation in it.

The following are large items (probably to large to ship)

Set of 4 Enkei FD-05 wheels, 18X7.5, 53 mm offset, 5X114.3 Bolt Circle
These have 4 Michelin MXM4 225/45/18 tires on them, 1 has a bad
sidewall. Had on my car for approx 11K miles $500. I would consider
taking tires off and just selling wheels.

Front splash panel in very good condition. A few scratches along
bottom: $30

Front bumper cover $100.
Good shape, but too large to ship.

I would deliver to meet someone up to 75 miles from Wichita KS on the large items.

Ron A

Please post a full size picture of each wheel, large enough to see the actual condition of the entire wheel.

If you do not post them in a reasonable time the thread may be closed.

Oldsman71

iTrader: (1)

OK Ron. They are at my work. I will try to find some time on Monday to take pics and get them up.

Ron A

Ok.

drillzzz

I’ll take the clear led for the wing

Oldsman71

iTrader: (1)

^ pm'd you drillzzz.

Scottyknows007

If you can get a couple close ups on the front bumper. Might be interested. here in dallas and could make a trip up if I need to

AnthraciteTypeS

pm'd you, ill take the splash panel

Oldsman71

iTrader: (1)

Per Rons' instructions. Here are wheel pictures. There are a few small imperfections on clear coat on machined areas present on all 4 wheels, but no curb rash or bent wheels.

Oldsman71

iTrader: (1)

I will try to get bugs and grime cleaned up tonight and take some pictures.

Anthracite: I will try to locate a box big enough to hold part and small enough to ship and see what cost is

Oldsman71

iTrader: (1)

Here you go. The only real defect in this bumper cover is the area on drivers side underside toward the back that is not as flat as it should be. See 1st photo. Also a pretty good scrape in front of this. The 2 may be related.

bigdaddyKA8

iTrader: (5)

Any chance you could post that part number for the clear led? I've seen a member with it before awhile back but never got around to asking him. Too bad you can't ship that bumper or I'd be all over it. Anyhow glws.

Oldsman71

iTrader: (1)

Sale pending on the Clear LED. Don't have part number for this as it came loose from ebay. The only thing that resembles a part number is " STANLEY 050-9236" It says"Honda" 2 lines above this.

Too bad about high cost of freight. I'm sure it would be well over $100 to ship the bumper cover.

The cost to ship the splash shield is $35+ which pretty much kills selling it.

Merry Christmas everyone.

brian6speed

iTrader: (5)

The clear honda light is from honda goldwing 1800 motorcycle. There isn't a part number because the light comes with the goldwing spoiler. You can't purchase it seperately new. You can buy whole spoiler or look for used light for sale. Bought mine on ebay, they pop up every once in awhile.

I would recommend holding out for a Honda OEM light instead of the aftermarket ones on ebay. I had cheaper ebay one before and water got in and deformed circuit board. Honda one looks better and is better quality.

Why do I waste my brain storage remembering this stuff.


Good luck with rebuild and sales Oldsman

Oldsman71

iTrader: (1)

Thanks Brian. For clearing this up. Of course you know several parts off your car, get a chance to be functional again on mine

Oldsman71

iTrader: (1)

The clear LED wing light is sold.
I also sold the wiring harness I had for the wing.
Wing by itself $125 plus shipping
HD Black trunk springs $55 plus shipping
I added some pictures to show connectors comimg out of wing pedestal are good (not cut) as well as all mounting studs are good. Will also include 4 new oem mounting nuts with the spoiler.
I am adding my old grill parts to this post $75 plus shipping for all 4 parts. You will need to come up with screws to attach individual pieces as well as the surround piece (I am using these with my new grill parts)

drillzzz

Bump for great communication and a smooth sale!

PS: Shipping was super fast

Oldsman71

iTrader: (1)

Update:
Bumper cover sold locally
Headlight Housings: Pending (I think)

Oldsman71

iTrader: (1)

Headlight housings still available, as are wing, HD black trunk springs and grill pieces.

Oldsman71

iTrader: (1)

Bump. I still have headlight housings, spoiler, trunk springs, and grill. Will consider offers. Buyer to pay shipping to U.S. addresses (lower 48 only). Also have door panel window "fuzzies" moldings if anyone is interested.

Oldsman71

iTrader: (1)

Moderator Ron: Appears to be no further interest. Feel free to close at your discretion.