yvr_tsx

Category: Steering & Suspension
Price: $1
Private or Vendor Listing: Private Listing
Part Fits (you may select multiples): CL 2G, NSX 1G, RSX, TL 3G, TL 2G, TL 1G, TSX 2G, TSX 1G, Integra, Legend, Vigor, Other Honda/Acura, CSX, Type-S Model
Location (State/Prov/Terr): Can-BC
Item Condition: Brand New

Looking to trade a pair of 20mm Ichiba V2 spacers for 10mm equivalents. 64mm centrebore and 5x114 bolt pattern. These spacers are basically brand new. Tried to install them but discovered, I do not have a 19mm deep socket to bolt the spacers on, so placed them back into the box.

Do not want to modify the fender, so looking for smaller spacers to create a "weaker" offset.

Only looking for 10mm spacers with studs included like Ichiba V2 or Project Kics. Do not want separated studs to avoid having to replaces the studs on the car.

Let me know if anyone is interested in a trade.

yvr_tsx

Bump

scooterb84

iTrader: (1)

I have 15mm Ichiba V1's on my rear and want to go 20MM. I know you want V2 but if you get to the point where you will take V1, let me know. I want to go a little wider in the back since I have the HFP wheels. The replacement studs aren't that bad to install at all, plus they are nice and long. Hit me up if interested.

quanaman

iTrader: (4)

IIRC there is no such thing as a V2 10mm spacer. They're too think to allow for pressed in studs. You'd have to go to 15mm, IIRC thats the thinnest spacer that comes in V2.

GL

scooterb84

iTrader: (1)

Good catch. It appears you are correct. They only offer the V2 15mm and up.

rockstar143

iTrader: (6)

actually, akata was making a v2 10mm spacer, but there wasn't enough material and one member had a rim come off while driving slow because it snapped the studs off of the spacer.

if getting a 19mm deep socket was too daunting, you're not going to want to deal with having to install extended studs to be able to use v1 10mils.