JBP

Category: Multiple Parts
Price: $1
Private or Vendor Listing: Private Listing
Part Fits (you may select multiples): TL 3G
Location (State/Prov/Terr): CA
Item Condition: Used

I've got a handful of parts to sell that I removed from my 2005 TL. Most of these parts have around 150,000 miles on them.

1. Type-S Tails - $75 + Shipping
Please note that the driver-side light has a crack in the black plastic part that is covered when the trunk lid is closed.

2. RV6-P EDFC-compatible front strut bar - $75 + Shipping

3. Aftermarket J Pipe - $175 + Shipping
I feel kind of stupid saying this, but I honestly can't remember which brand this is and I can't find the receipt. I'm pretty sure it's the ATLP though. Gaskets not included..

4. Progress Rear Sway Bar - $100 + Shipping

5. AEM Cold Air Intake - $125 + Shipping
Please note that there's a fairly deep scratch in it; purely cosmetic though.

6. Bluetooth HFL module - $100 + Shipping

7. OEM Radio and Navi display - $250 + Shipping

8. Tanabe Medallion Exhaust - $500 - local pickup only
Needs new gaskets

9. Tein SS Coilovers - $400 + shipping
No tools or accessories

10. Tein EDFC system - $100 + shipping, or $50 if you buy it with the Coilovers.
I had an occasional issue where it would lose connection to one end of the car, but turning it off and on again always restored it for a little while. I usually just had it turned off since I didn't change the settings very often.

11. Enkei Lusso 18x8 wheels with Hankook Ventus V12 Evo tires - $400 - local pickup only
The tires have white paint in the treads and there are some white specks on the wheels (seriously, you ever notice that whenever somebody spills paint all over the road, it's always white?) I'm out of town right now, but I'll measure the tread depth when I get home.

12. A-Spec lip kit - $100 - local pickup only
Please take a close look at the photos, as there's quite a bit of wear and tear (and white paint, see my comment about the wheels and tires). The front lip has a split in the middle, and both of side skirts are missing an attachment flap or two, though you wouldn't be able to see that when they're installed. These will definitely need to be refinished.

13. Coverlay plastic dash shell - $100 - local pickup only
This is probably the best solution for a cracked dash aside from replacement.

All of the photos can be viewed here: https://www.dropbox.com/sh/vimly3vsq...JUk1P6Efa?dl=0

Please take a close look at the photos - everything has some wear and tear, and the photos describe the items better than my words.

I'm currently located in Chino Hills, CA. I'd be happy to meet around there or in Orange County.

I'm moving across the country in two weeks and I really don't want to take any of these parts with me. I'll entertain any reasonable offers (or even unreasonable ones, if you're willing to come and pick it up).

Ron A

Just to eliminate a bunch of requests for parts not listed, are these all you have to sell?

JBP

Yes, this is everything. Thanks!

DohcIVTEC

iTrader: (1)

interested in purchasing the rims. waiting on the tread depth. did you use the OEM lug nuts or aftermarket?. did you need to use any hub rings to fit on your acura? Any of the rims cracked (all are straight)? I'm located in pasadena and can pick up. thanks!

stkh22

iTrader: (2)

very interested in the lip kit and tail lights. do you have a contact number to reach you for local pick up?

jimmyfu

interested in coverlay and the tanabe medallion, but unfortunately i'm up in NorCal. LMK if you change your mind about shipping

JBP

Yes, I'll send you a message.

aashiq1001

DO you have following Parts???

Steering Wheel With Airbags intact
Front Engine Mount

R FRONT SUB-FRAME MIDDLE MOUNTING (50280-SDA-A01)

Rear Driver Side Tail Light
Both Head Lights Complete

if you got it in Intact un broken state please tell with your final price

JBP

I'll look into shipping them, I just expect that it'll be on the pricey side due to size and weight.

upnout

iTrader: (6)

any picks of the J pipe (looking for the atlp ver 2), front strut bar, and cai

Jojo7488

Yo bro if the tail lights, tein coils and edfc are still available im interested in purchasing them. I live in the L.A area so i can go pick them up.

viictorrios

PM'd

JBP

The tread depth varies between .15" and .25". I used Muteki lug nuts, and I did use hub rings. I'm pretty sure I know where they are; if I can find them, I'll include the lug nuts and rings. The rims are not cracked and they didn't feel warped, though I do not have access to a balancer to be able to check them.

JBP

The tail lights are currently spoken for, but the coilovers and EDFC are not.

JBP

The list in the original post is pretty much all I have, though I *might* have the original (non Type-S) OEM tail lights in storage. I'll take a look tomorrow and let you know.

JBP

Here's the J pipe:
https://www.dropbox.com/s/u28d69lbb7...%20PM.jpg?dl=0
https://www.dropbox.com/s/9tpofx7dwq...%20PM.jpg?dl=0

Here's the front strut bar:
https://www.dropbox.com/s/3zymbrczap...%20PM.jpg?dl=0

And here's the CAI:
https://www.dropbox.com/s/pmoxlm81s4...%20PM.jpg?dl=0
https://www.dropbox.com/s/b53dkr5rek...%20PM.jpg?dl=0

Jojo7488

Alright then. Well ill take the coils and edfc off your hands as soon as possible.

JBP

Awesome, shoot me a PM with your location and we'll figure out a time and place to meet.

JBP

Hey Jojo7488, it's saying that your inbox is full when I try to reply to your message.

MathyewTee

I'll buy the intake from you. Email me at mrtrimborn@gmail.com

CharlieHustle

Very interested in the a spec kit. Aside from the refinishing and small crack repair, will all the pieces install correctly without trouble? You mention attachment points missing so I'm trying to get an idea of how much improvising it'll take to get the whole kit mounted.

ABP UA6

iTrader: (13)

What's the dash shell exactly? Just a trim piece that sits on the dash? Please explain....I'm interesred.

CharlieHustle

It's an ABS plastic cap that's molded to fit over the TL dash to cover cracks or damage from the elements. They use silicone adhesive to hold the piece in place over your existing dashboard.

JBP

The following items have been sold:

- A-Spec lip kit
- Tein SS Coilovers
- Tein EDFC
- Type-S Tails
- RV6-P Strut bar

Funmonkey

Is the progress rear sway bar still available? What size is it, Is it the 24mm one?

juvndelgvdo

Interested in the air filer

Ltfa182

Sent a pm about the j pipe

JBP

It is still available. I can't find my calipers, but I don't think Progress sold the bar in any other size.

Ltfa182

Is that a dent in the j-pipe? It looks like it but hard to tell. Also, do you know if this deletes the 3rd cat or not?

JBP

***PRICE DROPS***

The following items are still available:

3. Aftermarket J Pipe - $150 + Shipping
I feel kind of stupid saying this, but I honestly can't remember which brand this is and I can't find the receipt. I'm pretty sure it's the ATLP though. Gaskets not included..

4. Progress Rear Sway Bar - $90 + Shipping

5. AEM Cold Air Intake - SALE PENDING
Please note that there's a fairly deep scratch in it; purely cosmetic though.

6. Bluetooth HFL module - $90 + Shipping

7. OEM Radio and Navi display - $200 + Shipping

8. Tanabe Medallion Exhaust - $400 - local pickup only
Needs new gaskets

11. Enkei Lusso 18x8 wheels with Hankook Ventus V12 Evo tires - $300 - local pickup only
The tires have white paint in the treads and there are some white specks on the wheels (seriously, you ever notice that whenever somebody spills paint all over the road, it's always white?) I'm out of town right now, but I'll measure the tread depth when I get home.

13. Coverlay plastic dash shell - $80 - local pickup only
This is probably the best solution for a cracked dash aside from replacement.

There is a very shallow dent in the pipe - please see the attached photo.
This does NOT delete the 3rd cat.

Ltfa182

PM me a price shipped to 21704. Interested in the j pipe

Taquila1

iTrader: (1)

pic of the wheels

Ron A

This is from the first post. It was posted in regular size so I have made it bolder and bigger so others won't miss the link. Click on the + to make the pictures as large as you want.

All of the photos can be viewed here: https://www.dropbox.com/sh/vimly3vsq...JUk1P6Efa?dl=0

juvndelgvdo

Is the intake still available?

snip33r

iTrader: (1)

Ygpm

BiggPinyot

PM Sent

UA6andfriends

price for 4 kook tires w/o wheels?

rockvilleTL

Sent a PM inquiring on what is still available.

Ron A

UTAG @JBP Thread will be closed if not updated soon.

rockvilleTL

Anything here still available?