CLOSED: 19 AXIS "Power" Matte Gunmetal w/Tires
#1
19 AXIS "Power" Matte Gunmetal w/Tires
Category: Wheels & Tires
Price: $1400
Private or Vendor Listing: Private Listing
Part Fits (you may select multiples): TL 3G
Location (State/Prov/Terr): FL
Item Condition: Used
ITEM: AXIS "Power" Matte Gunmetal wheels 19x9.5x 40+ ALL (4) w/Nexxan 235/35/19
Wheels cost approx. $335-350+ EACH (w/NO tires) Example: eBay or even WHEELNEXT... Or feel free to shop around and verify for yourself.
Hey fellas! I have been sitting on the thought of selling/trading my current set up for something different. I have only had this set up for approx 2mo+. Condition: FLAWLESS! all the way around. Tires are 80+ - 90% tread. Like I said, FLAWLESS! Not one curb check or rash!
If TRADE offer, looking for anything that just sets it off and smacks me as "THAT IS THE ONE!" Will consider staggard styles, non-staggard, 18in wheels, 19in wheels...etc. Just post what your TRADE offer may be. *Not in any rush. Just keeping a open mind...Just want something different*
As for SALE, price is $1400.00 (prefer pick up 1st option) but will consider shipping.
Like always, call, text or PM anytime #813-841-5563.
Few Pics:
Last edited by JayVee; 02-17-2012 at 09:42 PM.
#6
Just going to BUMP the thread with answering a few ?'s I am getting by PM for the next man and so on. And maybe 1 or 2 of my own just to cover all bases.
ANY MODS TO MAKE IT FIT?
YES. Rolling of the fenders was required for this amount drop and stance. When I had the TEIN S TECH springs, NONE what so ever was needed.
ANY ISSUES WITH RUBBING?
YES. As for now after the rolling of the fenders, I believe a simple touch here and there will resolve any remaining issues. Its nothing serious, its when I have passengers and turning left around a fast curve the rear passenger tire is rubbing on something...Not the fender! No appearance or damage has been done at all. I have checked and checked and there is no physical evidence of it rubbing at all. But you definitely hear it time to time in certain driving conditions touching something (Maybe the inner felt/plastic I assuming at this moment)
WHAT ARE YOU DROPPED ON?
HT-SPEC V2 Type 1
ALIGNMENT NEEDED?
YES. I am currently running SPC rear adj. arms and nothing at the time in the front. The rear are still sporting a -1.5 since the drop on the coils and have not corrected it as of yet. As mentioned, no kits up front but currently looking into the SPC Adj Ball Joint Kit or Ingalls. The toe and anything possible setting setting has been corrected.
WHAT ARE YOU LOOKING FOR IN TRADES?
As mentioned above, I am keeping a open mind, But to be a lil more specific I would definitely consider a staggard fit of somewhere in size of 19x8.5 or 9 in front and 19x9, 9.5 10 in rear with not to aggressive offset so it will fit with the mods already performed on the car itself. I don't mind the all 4 flush same size either, that will all depend on style and design at that point. And the same goes for size 18s, it really all depends.
Now, to narrow it down to specific design likings. My FAVORITE WHEELS OF ALL TIME IS: VOLK VS XX!!! (Yeah, I know... GOOD LUCK WITH THAT! ) Damn you Murph!!! LOL!
I also like: RON JON, VOLK, WORK, ENKEI, VARRSTOEN, AXIS and as last resort in a trade, I have always liked the EBONY (or Black Chrome finish) ASPEC's.
Again, also keeping a "Open mind". With that being said, if any cash is needed on either end, I am sure we can work that out also.
...Hope I covered all further questions and inq's but if anything else, please feel free to contact me. Thanks!
ANY MODS TO MAKE IT FIT?
YES. Rolling of the fenders was required for this amount drop and stance. When I had the TEIN S TECH springs, NONE what so ever was needed.
ANY ISSUES WITH RUBBING?
YES. As for now after the rolling of the fenders, I believe a simple touch here and there will resolve any remaining issues. Its nothing serious, its when I have passengers and turning left around a fast curve the rear passenger tire is rubbing on something...Not the fender! No appearance or damage has been done at all. I have checked and checked and there is no physical evidence of it rubbing at all. But you definitely hear it time to time in certain driving conditions touching something (Maybe the inner felt/plastic I assuming at this moment)
WHAT ARE YOU DROPPED ON?
HT-SPEC V2 Type 1
ALIGNMENT NEEDED?
YES. I am currently running SPC rear adj. arms and nothing at the time in the front. The rear are still sporting a -1.5 since the drop on the coils and have not corrected it as of yet. As mentioned, no kits up front but currently looking into the SPC Adj Ball Joint Kit or Ingalls. The toe and anything possible setting setting has been corrected.
WHAT ARE YOU LOOKING FOR IN TRADES?
As mentioned above, I am keeping a open mind, But to be a lil more specific I would definitely consider a staggard fit of somewhere in size of 19x8.5 or 9 in front and 19x9, 9.5 10 in rear with not to aggressive offset so it will fit with the mods already performed on the car itself. I don't mind the all 4 flush same size either, that will all depend on style and design at that point. And the same goes for size 18s, it really all depends.
Now, to narrow it down to specific design likings. My FAVORITE WHEELS OF ALL TIME IS: VOLK VS XX!!! (Yeah, I know... GOOD LUCK WITH THAT! ) Damn you Murph!!! LOL!
I also like: RON JON, VOLK, WORK, ENKEI, VARRSTOEN, AXIS and as last resort in a trade, I have always liked the EBONY (or Black Chrome finish) ASPEC's.
Again, also keeping a "Open mind". With that being said, if any cash is needed on either end, I am sure we can work that out also.
...Hope I covered all further questions and inq's but if anything else, please feel free to contact me. Thanks!
Last edited by JayVee; 02-18-2012 at 07:40 AM.
#7
Moderator
Chapter Leader (South Florida Region)
Chapter Leader (South Florida Region)
iTrader: (6)
Have you seen the price of Ronjon on ebay? They are VERY affordable.
PS...I would have kept it simple and let people know that if they plan on slamming the car and correcting camber, they will likely need to roll some fender. You're almost scaring them away with all that detail!
And yes, the fronts, are likely rubbing on the plastic liner and or the front tab where the fender goes straight. The plastic will get to the point where it won't touch anymore and just leave a small hole. No biggy.
J.
PS...I would have kept it simple and let people know that if they plan on slamming the car and correcting camber, they will likely need to roll some fender. You're almost scaring them away with all that detail!
And yes, the fronts, are likely rubbing on the plastic liner and or the front tab where the fender goes straight. The plastic will get to the point where it won't touch anymore and just leave a small hole. No biggy.
J.
Trending Topics
#8
Have you seen the price of Ronjon on ebay? They are VERY affordable.
PS...I would have kept it simple and let people know that if they plan on slamming the car and correcting camber, they will likely need to roll some fender. You're almost scaring them away with all that detail!
And yes, the fronts, are likely rubbing on the plastic liner and or the front tab where the fender goes straight. The plastic will get to the point where it won't touch anymore and just leave a small hole. No biggy.
J.
PS...I would have kept it simple and let people know that if they plan on slamming the car and correcting camber, they will likely need to roll some fender. You're almost scaring them away with all that detail!
And yes, the fronts, are likely rubbing on the plastic liner and or the front tab where the fender goes straight. The plastic will get to the point where it won't touch anymore and just leave a small hole. No biggy.
J.
#9
Yes, you are prolly right to a certain degree. But at the same time, I rather weed out the fat from anyone wasting my time or theirs. That is just the type of person I am. HONEST and DETAILED to the last mustard seed. But like u said, its no biggie at all. Really, it isn't. It really all depends on what stage of stylish drop vs slammed you are attempting to drive on. I just tend to explain all covering all corners in case there is that certain someone who is MORE anal and picky then me... I have YET! found that person but I am talking to him anyways. Thanks Rockstar as always pointing things out. LOL!
#10
Moderator
Chapter Leader (South Florida Region)
Chapter Leader (South Florida Region)
iTrader: (6)
LOL...I agree, trust me, I'm a 100% positive feedback dude too...but I'm also a Marketing major and there's a point where you go past being honest and into UNselling your product.
Anyway, bot, I'm sure these'll go. They are cool lookin wheels. Pick your next set and STICK with em!
Anyway, bot, I'm sure these'll go. They are cool lookin wheels. Pick your next set and STICK with em!
#11
LOL...I agree, trust me, I'm a 100% positive feedback dude too...but I'm also a Marketing major and there's a point where you go past being honest and into UNselling your product.
Anyway, bot, I'm sure these'll go. They are cool lookin wheels. Pick your next set and STICK with em!
Anyway, bot, I'm sure these'll go. They are cool lookin wheels. Pick your next set and STICK with em!
#12
OK, I PM'd a member who I actual stopped at a local UPS Store for a shipping quote to the IL. 60416 area. This location, as well as many others within the same miles in distance would be a great accurate shipping quote. And and as we may know, its NOT a small and light pkg.
Wheels & Tire Pkg. SHIPPING $40+ ~ 50.00 EACH! Total $200.00
Wheels & Tire Pkg. SHIPPING $40+ ~ 50.00 EACH! Total $200.00
Last edited by JayVee; 02-18-2012 at 05:00 PM.
#17
... I may be removing the wheels and tires soon and buttoning on the stock 5 stars just to preserve the usage & integrity of the item(s) being sold... I really would hate something to happen to them at this moment. Like I said, I am willing to sell the WHEELS alone! Not the tires alone. I will keep the tires if the wheels sell for my next set. But just thought of opening my chances and a buyers options with parting the 2. Thanks!
Last edited by JayVee; 02-20-2012 at 09:55 AM.
#28
...so we will see.
#29
Moderator
Chapter Leader (South Florida Region)
Chapter Leader (South Florida Region)
iTrader: (6)
That's actually a very good offer, if the type s wheels come with tires. That'll at least buy you some time before you decide on your next set etc..and you could probably sell em and make a bit more money.
BUT, if you were to drive, or even meet halfway (maybe in Stuart or something)...I'd be sure to have the full amount paypal'd first. Imagine you drive so far and the person says they changed their mind.
BUT, if you were to drive, or even meet halfway (maybe in Stuart or something)...I'd be sure to have the full amount paypal'd first. Imagine you drive so far and the person says they changed their mind.
#30
That's actually a very good offer, if the type s wheels come with tires. That'll at least buy you some time before you decide on your next set etc..and you could probably sell em and make a bit more money.
BUT, if you were to drive, or even meet halfway (maybe in Stuart or something)...I'd be sure to have the full amount paypal'd first. Imagine you drive so far and the person says they changed their mind.
BUT, if you were to drive, or even meet halfway (maybe in Stuart or something)...I'd be sure to have the full amount paypal'd first. Imagine you drive so far and the person says they changed their mind.
#39
And obviously, this thread is showing nothing, so waters are running cold. Hope that clears it all up for anyones false interpretation or questions my intent of this ad, which is 100% legit. And have shown this on many posts and transactions. Just seems petty anything else outside of that Rockstar143. I am sure I would gotten away with it but now that u made it a spol light conversation and placed it on BLAST...we will see. U could have PM'd that u know
#40
Senior Moderator
iTrader: (1)
I'm not Ron, far from it but I don't think there is anything wrong with you saying that you are testing the waters or even selling them on Craigslist or Ebay.