Darkcyde024

iTrader: (1)

Category: Audio/Video/Electronics
Price: $450
Private or Vendor Listing: Private Listing
Part Fits (you may select multiples): CL 2G, NSX 1G, RDX, RL 2G, RL 1G, RSX, TL 4G, TL 3G, TL 2G, TL 1G, TSX 2G, TSX 1G, Integra, Legend, Vigor, Other Honda/Acura, CSX, Type-S Model
Location (State/Prov/Terr): CA
Item Condition: Brand New

I am selling BRAND NEW, NEVER USED ITEMS.

Infinity Kappy Perfect 12" VQ subwoofer with Phoenix Gold Xenon x600.1 amplifier with 1 cubic foot MDF subwoofer box. All items are BRAND NEVER, NEVER USED, NEVER MOUNTED. These items have been collecting dust in my garage as they were for a car that I no longer have. The Infinity Kappa Perfect 12" subwoofer has a peak power of 1600 watts. The birth certificate on the Phoenix Gold 600.1 says total power is 892.34 watts. Subwoofer box is 1" MDF with gold terminals and carpeted black. Cost me over $800! Asking $450 obo.

Can send more pics upon request.

PHOENIX GOLD XENON x600.1
Phoenix Gold's new optimized technology means full power output at any impedance (ohm) load

600 Watts RMS x 1 @ 4 ohms

600 Watts RMS x 1 @ 3 ohms

600 Watts RMS x 1 @ 2 ohms

600 Watts RMS x 1 @ 1 ohm

variable thermal feedback controlled Cooling fans

24dB Linkwitz-Riley low pass and subsonic filter

High efficiency (greater than 80%) Class D Operation

Buffered RCA full range thru output

Remote Monitoring Display (RMD) port

Low Pass Level control ready (LPL-44)

CEA-2006 approved
Dimensions: 18.25L x 10.6W x 2.5H



Function:
All of the Xe.Tune" controls for the crossovers, sensitivity, and bass boost are located on the top of the amplifier.All crossovers are ultra precise Linkwitz- Riley 24dB per octave and a separate high and low pass filter is available for each set of channels. This means that any standalone Xenon amplifier can be set to bandpass by turning both crossovers on. This feature is rarely available on any other amplifier on the market today. All crossover frequency potentiometers have 41 detents or clicks so the end user can set the exact crossover frequency desired. For example, turn the potentiometer 12 clicks for exactly 85Hz. No more turning the potentiometer and guessing where your crossover points are. Full Range Auxiliary Outputs, LPL and RMD Ports come standard on all units.

Power Outputut:
All Xenon amplifiers are rated according to the new CEA-2006 standard which is identical to how we have always rated all Phoenix Gold amplifiers. For example the X600.1 will make a MINIMUM of 600 watts with less than 1% THD @ 14.4 Volts from 1 to 4 ohm. Each Xenon amplifier comes with its own birth certificate that will meet or exceed our printed specifications. Xenon amplifiers are designed to handle extreme abuse and drive almost any load. With Xe.Load " technology its very easy to choose what speakers to wire to the amplifier to get maximum power from the amplifier. It doesn't matter whether its a DVC 2 ohm, SVC 4 ohm, or three DVC 1 ohm speakers. A Xenon amplifier automatically senses the load from 1 to 4 ohm and drives it with full power every time. This makes life simple for the end customer and guarantees he will always receive full power regardless of the load.

Circuit Topology:
The Xenon series two and four channel models use the legendary Triple Darlington output stage. This is same circuitry found in our MS, M, ZPA, ZX, and Titanium amplifiers.This topology is not cheap.This is why you rarely see any car amplifiers and only high end home amplifiers using this circuitry.This provides the ultimate in sound fidelity, headroom, reliability and can drive difficult loads without problems. The Triple Darlington output stage has three levels of amplification that ramp up the energy to the speaker load. The first sub-stage is the pre-drivers, which get their signal from the voltage gain stage and increase the available current in it or "stiffen" the signal. This stiffened signal is then fed to the driver transistors where it is stiffened even more. Finally, the output of the driver transistors is fed into the output transistors where it is stiffened substantially; enough to drive the speaker load wired to the amplifier.

All monoblocks are Class D technology. One clear advantage is that Class D amplifiers are much more efficient and this allows us to make a lot more power with a lower operating temperature and ease the strain on customer's electrical system. Of course, Class D amplifiers are low pass only, but 99% of monoblocks will be used on subwoofers. The average efficiency of a Xenon Monoblock is 80% from input to output, which means only 20% of the amplifier's energy is turned into heat.

Cooling System:
We have completely reengineered the way amplifiers are thermally monitored with our Xe.Flow" technology. First, we've added nearly 5 times the mass of heat sink relative to our very successful TCCH system used in the Titanium amplifiers. We also have bolted the transistors to the major heatsink, with minor extruded heatsink clamp down bars. This allows the transistor to have a heatsink on both sides of the device. Additionally, every model has a variable speed fan (except X400.1) located in the center of the amplifier for even more thermal dissipation.The combination of improved mass and the ability to move hot air out of the amplifier make it nearly impossible for them to engage their thermal protection.


Infinity Kappa Perfect 12" VQ
Infinity understands that the difference between good bass and great bass is in the details. Incorporating the latest low-frequency innovations, the Kappa Perfect12 VQ 12" subwoofer delivers unbeatable performance and system-tuning flexibility.

Resonance is a big time enemy of great bass, and Infinity's revolutionary Magnesium Metal Matrix (M3D) is the ultimate cone material — it's 20 times less resonant than aluminum! Housed in its die-cast frame, the M3D cone is an ultra-stiff piston that translates the low-frequency signal from your amplifier with frightening accuracy. The butylene rubber one-piece surround/gasket exerts tight control over cone excursion so you'll hear smooth bass even when you're really cranking it!

The Kappa Perfect VQ subwoofer offers the unique Variable Q feature, which allows you to optimize the speaker for use with a variety of enclosures — sealed, ported, or bandpass (even free-air applications). The sub is shipped with two metal polepiece inserts, which can be plugged into the motor assembly to vary the stiffness of the suspension:

large insert: small sealed or ported boxes, SPL competition
small insert: medium size sealed or ported boxes
no insert: very large enclosures or free-air use

This patent pending approach also allows you to change the character of your bass for different applications. Imagine — you could tune your subs for sound quality during the week, then retune for an SPL competition on the weekend! Leave it to Infinity to take bass to a whole new place.

Details:
Magnesium Metal Matrix (M3D) cone
large-roll butyl-rubber surround
Variable Q
massive cast-aluminum basket
3" voice coil
suitable for free-air use (handles up to 200 watts in free-air mode)
recommended power range 75-400 watts RMS
peak power handling 1,600 watts
frequency response 23-400 Hz
sensitivity 89 dB
top mount depth 7"
sealed box volume 0.4-1.25 cu. ft.
ported box volume 1.75-3.00 cu. ft.

Ron A

Pictures moved. Free bump.

Darkcyde024

iTrader: (1)

Thanks Ron! You the man. Also, correction; the subwoofer box is made of 3/4" MDF and not 1" as previously stated. Approx 1.25 cu ft