05 Acura tl 6sp mods- AEM, GREDDY, ROTORA, HONDATA
08-29-2009, 10:45 AM
#1
Pro
Thread Starter
Join Date: Dec 2004
Location: alta loma, ca
Age: 42
Posts: 583
Likes: 0
Received 0 Likes
on
0 Posts
05 Acura tl 6sp mods- AEM, GREDDY, ROTORA, HONDATA
I've gotten rid of lots of stuff, hope everyone likes what they got, and thanks for helping out.
I still have the greddy exhaust for my car, just dropped the price to $600, you pay for shipping.
I also have some rotora slotted rotors in EXCELLENT condition. I took them off and was surprised to see how new(thick/clean) they still were. If you need rotors soon, get a pair of barely used rotora's from me, 250 for the full set of four, + ship me your old beat rotors, and I'll pay to ship mine to you.
Also have an aem intake. It's the V1, 100 bucks + shipping, or come pick it up for 90-
Sorry for the 'book-format', and thanks again!
I still have the greddy exhaust for my car, just dropped the price to $600, you pay for shipping.
I also have some rotora slotted rotors in EXCELLENT condition. I took them off and was surprised to see how new(thick/clean) they still were. If you need rotors soon, get a pair of barely used rotora's from me, 250 for the full set of four, + ship me your old beat rotors, and I'll pay to ship mine to you.
Also have an aem intake. It's the V1, 100 bucks + shipping, or come pick it up for 90-
Sorry for the 'book-format', and thanks again!
09-08-2009, 11:41 AM
#2
Pro
Thread Starter
Join Date: Dec 2004
Location: alta loma, ca
Age: 42
Posts: 583
Likes: 0
Received 0 Likes
on
0 Posts
bump!
09-08-2009, 12:56 PM
#6
Auto Couture Status
iTrader: (1)
Join Date: Jun 2009
Location: Your mommas basement
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
very interested in the exhaust.. any pics of any sign of rough usage? and would this be the evo greddy V2? if so please let me know. i will PM you rest of questions later, dont want to flood.
-DeZ
-DeZ
09-08-2009, 02:19 PM
#7
10th Gear
Join Date: May 2009
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Will the v1 intake work on a j30 motor (04 accord 3.0l v6 sedan)?
Trending Topics
09-30-2009, 07:16 PM
#8
Pro
Thread Starter
Join Date: Dec 2004
Location: alta loma, ca
Age: 42
Posts: 583
Likes: 0
Received 0 Likes
on
0 Posts
sorry I haven't been on for a while guys, HARD TIMES, you know..Anyways. -The Greddy EVO2's are in excellent condition, no scratches or rust. I dont have any pics, unless you can find one of my car on here! but you know what they look like, I took good care of my sh!t and cleaned it weekly.
-The AEM V1 is gonna fit just fine, but I dont know if there will be an existing hole to put the rubber mount. If not just drill a little hole and your good to go.
-I dont think the rotors will fit on anything other than 6sp tl without swaping the hubs and a couple of other things, I have a complete list somewhere ir interested. Also, If anyone is local to 909/951/949/760, I can swap your non-BREMBO (base TL) calipers and rotors to the factory BREMBO's (6 speed). To do the swap, just drive out and be prepared to spend some time with me, maybe bring a 12 pack. My buddy has a shop, and I'm fully capable of the r&r. If anyone is interested PM me. I'll do 700 for parts and labor, full swap, you drive off with brembo's, I'll keep the 'base' calipers and rotors (brakes).
And I'll try to stay on top of my messages and visit more frequently, sorry again for the delayed responses-
-The AEM V1 is gonna fit just fine, but I dont know if there will be an existing hole to put the rubber mount. If not just drill a little hole and your good to go.
-I dont think the rotors will fit on anything other than 6sp tl without swaping the hubs and a couple of other things, I have a complete list somewhere ir interested. Also, If anyone is local to 909/951/949/760, I can swap your non-BREMBO (base TL) calipers and rotors to the factory BREMBO's (6 speed). To do the swap, just drive out and be prepared to spend some time with me, maybe bring a 12 pack. My buddy has a shop, and I'm fully capable of the r&r. If anyone is interested PM me. I'll do 700 for parts and labor, full swap, you drive off with brembo's, I'll keep the 'base' calipers and rotors (brakes).
And I'll try to stay on top of my messages and visit more frequently, sorry again for the delayed responses-
10-01-2009, 11:52 AM
#10
9th Gear
Join Date: Sep 2009
Age: 43
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
JOE give me a shout im interested in the exhaust but dont have PM rights alexm4040@aol.com
10-03-2009, 01:40 AM
#11
Intermediate
Join Date: Jul 2009
Location: Toronto
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
if you still got the intake, let me know
12-01-2009, 08:03 AM
#13
This thread is closed for lack of updates or bumps by OP.
You can send a PM, and the OP can PM me if he/she wants this opened.
You can send a PM, and the OP can PM me if he/she wants this opened.
Thread
Thread Starter
Forum
Replies
Last Post
orkoTL
4G TL Problems & Fixes
107
09-28-2017 09:12 AM
