***Part-Out: 6spd J32 Turbo, Tein C/O, Audio, TSX Retros, MUCH MORE***
#1
Instructor
Thread Starter
Join Date: Oct 2004
Location: Lake Geneva, WI
Age: 38
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
***Part-Out: 6spd J32 Turbo, Tein C/O, Audio, TSX Retros, MUCH MORE***
I will be completely parting out my car any and every part you need let me know (OEM, Aftermarket, etc.). If the part is not listed here please PM/Post me what you need and a fair offer for it. All my car info is below.
The Car:
2002 Honda Accord V6 EX Coupe Silver/Charcoal ~40k miles.
Location: Southeastern Wisconsin/ Northeastern Illinois
Shipping not included in pricing!
SOLD 2003 Acura CL Type S J32A2 Engine.......$1500
This engine came from a 2003 Acura CL Type S 6 speed manual w/ ~22k miles on it (total mileage). Compression tested and got 195s on all 6 cyl. This engine is in great condition and nothing wrong with it. Its just time to move on and the most beneficial way of me doing this is parting out the entire car. At this point I wont split up the heads and block, will only sell complete. As seen in the pics the top IM piece and Valve Covers are powder coated in wrinkle blue. Also included are Innovative mounts, engine covers, sensors, etc.
SOLD 2003 Acura CL Type S 6 Speed Manual Transmission...$1500
This transmission came from a 2003 Acura CL Type S 6 speed manual w/ ~22k miles on it (total mileage). Included are the pedal assembly, master cylinder / reservoir, linkages, shifter, mounts, etc. No clutch, flywheel or pressure plate those are separate as I have a brand new set. (The old clutch is done not worth it for someone to install it and go change clutch few months down the road.)
SOLD DXD Racing Clutch Kit/Pressure Plate w/ OEM Flywheel...$750
I ordered these from DXD when I was still thinking about keeping the car. This is a one-off kit as the Clutchmasters and Clutchnet kits were garbage. Everything was made by DXD except for the OEM Flywheel which I bought from Acura.
GT35R Turbo Kit..........$4000 (complete kit w/ 3 tunes)
this is the kit that was made by bluecls6 (worked @ garrett as a designer) & allmotor from acurazine.com. There were two of these made for the J32A2 Engine w/ 6 speed (thinjim has the other one).
Garrett GT35R (Ball-Bearing) Turbo
- Turbine: 0.82A/R, 68mm 84 Trim wheel
- Compressor: 0.70A/R, 82mm 56 Trim wheel
Garrett High Efficienty Intercooler Core
- 8" x 16" x 3.5"
Tial/Garrett 38mm Wastegate
Tial/Garrett Blow-off Valve
Greddy E-Manage Engine Management System
Vortech Super FMU
Fuel Injectors
Walbro Fuel Pump
Boost Guage
Fuel Pressure Guage
Oil Feed/Return system (Earls)
Fuel Hoses/Fittings (Earls)
Intake Piping (2.5")
Turbo Manifold & Downpipe in Stainless Steel
Misc Items (water-cooling etc.)
Here is a link with info posted by allmotor/bluecls6 on acurazine when they first made the kits:
https://acurazine.com/forums/showthr...cl+turbo+gt35r
Everything works perfect and I put down 355whp/308wtq on a dynojet @ ~7psi.
Link to thread I posted about it:http://www./forums/showthread.php?t=123948
I also have a tune at 5.5psi and for 10psi but no dynos.
All the IC piping is powder coated in wrinkle blue and just looks amazing.
TSX Retrofits w/ LED Strip & HID kit.....$400 PENDING SALE
These retros were done by Richie and have a blue led strip in the front and orange led strip on the sides (turn signals). Blue leds have switch so you can turn on/off when you please. Projectors are obviously TSX and the washer/color mod was done to them. I have had no problems with leaks and/or condensation. I will include the HID kit with this as well but not 100% sure what temp (I think 6000k but maybe less).
Tein SS-P Coilovers w/ EDFC............$1,000
These literally have less than 1,000 miles on them. Bought them a few months ago for $1700. These include the pillow ball mounts and the EDFC. Just perfect.
19" DAVIN SS1 StreetSpin Wheels w/ Dunlop Tires..$1,200
Up for sale are my 19x8 +38 offset 5x114.3 (& 5x112) Davin Street Spin (SS1) Wheels/Spinners with 225/35/19 Dunlop Tires. These wheels & tires are in excellent condition, just absolutely immaculate. Davin's are the real deal spinners not that ebay add-on to any wheel kits. The mesh can be painted any color (I left it black as it matched my car well). There is a 2" Lip on these babies and they are chrome. You can also remove the spinner if need be and ride on just the wheels. When I bought these new only the wheels were $1,000 each and the tires were $225 each totalling to $5000 after mounting and balancing them. Never driven in salt or snow. These have ~7k miles and all special tools will be included for easy removal/installation.
Comptech Titanium Strut Bar..........$200
Polished Bar w/ Wrinkle Blue Ends. Excellent condition.
SOLD B]2003 Acura CL Type S ECU..........$150[/B]
This ECU came from a 2003 Acura CL Type S 6 speed manual w/ ~22k miles on it (total mileage).
SOLD B]Complete Engine/Cabin-ECU Wire Harness for swap...$500[/B]
This is the complete enigne, cabin, ecu wire harness ready to just plug-n-play for the J32A2 Engine, 6MT & ECU Swap.
TYC Tail Lights.............$150
Self explanatory, no cracks, leaks.
PENDING SALE TSX Leather Steering Wheel w/ Airbag...$250
Its an easy bolt-on swap and makes the car look richer.
Lambo Door Kit.........$300
This is the Vertical Doors Kit which was modified by Ei-ccord for a perfect bolt-on fit. I have not installed these, still in the box.
Ground Designs Black Widow 2 Body Kit....$300
This is an Authentic Ground Designs kit (Front & Rear Bumpers & Side Skirts). Painted Silver but will need new paint and some fiberglass work on front bumper. Aluminum mesh screen included.
Custom Trunk Audio Set-up..........$300
This is the custom audio set-up you see in the trunk. You get everything except the Subs, Amps, Battery. This in for the box, trunk floor with the amp rack tub, etc. all wrapped.
The Car:
2002 Honda Accord V6 EX Coupe Silver/Charcoal ~40k miles.
Location: Southeastern Wisconsin/ Northeastern Illinois
Shipping not included in pricing!
SOLD 2003 Acura CL Type S J32A2 Engine.......$1500
This engine came from a 2003 Acura CL Type S 6 speed manual w/ ~22k miles on it (total mileage). Compression tested and got 195s on all 6 cyl. This engine is in great condition and nothing wrong with it. Its just time to move on and the most beneficial way of me doing this is parting out the entire car. At this point I wont split up the heads and block, will only sell complete. As seen in the pics the top IM piece and Valve Covers are powder coated in wrinkle blue. Also included are Innovative mounts, engine covers, sensors, etc.
SOLD 2003 Acura CL Type S 6 Speed Manual Transmission...$1500
This transmission came from a 2003 Acura CL Type S 6 speed manual w/ ~22k miles on it (total mileage). Included are the pedal assembly, master cylinder / reservoir, linkages, shifter, mounts, etc. No clutch, flywheel or pressure plate those are separate as I have a brand new set. (The old clutch is done not worth it for someone to install it and go change clutch few months down the road.)
SOLD DXD Racing Clutch Kit/Pressure Plate w/ OEM Flywheel...$750
I ordered these from DXD when I was still thinking about keeping the car. This is a one-off kit as the Clutchmasters and Clutchnet kits were garbage. Everything was made by DXD except for the OEM Flywheel which I bought from Acura.
GT35R Turbo Kit..........$4000 (complete kit w/ 3 tunes)
this is the kit that was made by bluecls6 (worked @ garrett as a designer) & allmotor from acurazine.com. There were two of these made for the J32A2 Engine w/ 6 speed (thinjim has the other one).
Garrett GT35R (Ball-Bearing) Turbo
- Turbine: 0.82A/R, 68mm 84 Trim wheel
- Compressor: 0.70A/R, 82mm 56 Trim wheel
Garrett High Efficienty Intercooler Core
- 8" x 16" x 3.5"
Tial/Garrett 38mm Wastegate
Tial/Garrett Blow-off Valve
Greddy E-Manage Engine Management System
Vortech Super FMU
Fuel Injectors
Walbro Fuel Pump
Boost Guage
Fuel Pressure Guage
Oil Feed/Return system (Earls)
Fuel Hoses/Fittings (Earls)
Intake Piping (2.5")
Turbo Manifold & Downpipe in Stainless Steel
Misc Items (water-cooling etc.)
Here is a link with info posted by allmotor/bluecls6 on acurazine when they first made the kits:
https://acurazine.com/forums/showthr...cl+turbo+gt35r
Everything works perfect and I put down 355whp/308wtq on a dynojet @ ~7psi.
Link to thread I posted about it:http://www./forums/showthread.php?t=123948
I also have a tune at 5.5psi and for 10psi but no dynos.
All the IC piping is powder coated in wrinkle blue and just looks amazing.
TSX Retrofits w/ LED Strip & HID kit.....$400 PENDING SALE
These retros were done by Richie and have a blue led strip in the front and orange led strip on the sides (turn signals). Blue leds have switch so you can turn on/off when you please. Projectors are obviously TSX and the washer/color mod was done to them. I have had no problems with leaks and/or condensation. I will include the HID kit with this as well but not 100% sure what temp (I think 6000k but maybe less).
Tein SS-P Coilovers w/ EDFC............$1,000
These literally have less than 1,000 miles on them. Bought them a few months ago for $1700. These include the pillow ball mounts and the EDFC. Just perfect.
19" DAVIN SS1 StreetSpin Wheels w/ Dunlop Tires..$1,200
Up for sale are my 19x8 +38 offset 5x114.3 (& 5x112) Davin Street Spin (SS1) Wheels/Spinners with 225/35/19 Dunlop Tires. These wheels & tires are in excellent condition, just absolutely immaculate. Davin's are the real deal spinners not that ebay add-on to any wheel kits. The mesh can be painted any color (I left it black as it matched my car well). There is a 2" Lip on these babies and they are chrome. You can also remove the spinner if need be and ride on just the wheels. When I bought these new only the wheels were $1,000 each and the tires were $225 each totalling to $5000 after mounting and balancing them. Never driven in salt or snow. These have ~7k miles and all special tools will be included for easy removal/installation.
Comptech Titanium Strut Bar..........$200
Polished Bar w/ Wrinkle Blue Ends. Excellent condition.
SOLD B]2003 Acura CL Type S ECU..........$150[/B]
This ECU came from a 2003 Acura CL Type S 6 speed manual w/ ~22k miles on it (total mileage).
SOLD B]Complete Engine/Cabin-ECU Wire Harness for swap...$500[/B]
This is the complete enigne, cabin, ecu wire harness ready to just plug-n-play for the J32A2 Engine, 6MT & ECU Swap.
TYC Tail Lights.............$150
Self explanatory, no cracks, leaks.
PENDING SALE TSX Leather Steering Wheel w/ Airbag...$250
Its an easy bolt-on swap and makes the car look richer.
Lambo Door Kit.........$300
This is the Vertical Doors Kit which was modified by Ei-ccord for a perfect bolt-on fit. I have not installed these, still in the box.
Ground Designs Black Widow 2 Body Kit....$300
This is an Authentic Ground Designs kit (Front & Rear Bumpers & Side Skirts). Painted Silver but will need new paint and some fiberglass work on front bumper. Aluminum mesh screen included.
Custom Trunk Audio Set-up..........$300
This is the custom audio set-up you see in the trunk. You get everything except the Subs, Amps, Battery. This in for the box, trunk floor with the amp rack tub, etc. all wrapped.
#2
Instructor
Thread Starter
Join Date: Oct 2004
Location: Lake Geneva, WI
Age: 38
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
#3
Instructor
Thread Starter
Join Date: Oct 2004
Location: Lake Geneva, WI
Age: 38
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
#4
Whats up with RDX owners?
iTrader: (9)
Do you have pics of the turbo downpipe and manifold?
#7
If the airbag, cruise controls, and radio controls function on the steering wheel, then ill take it!!! let me know
Trending Topics
#8
6speed
Join Date: Feb 2008
Location: Seattle, WA
Age: 39
Posts: 348
Likes: 0
Received 0 Likes
on
0 Posts
i would take the strut bar if it wasnt blue on the ends :\ i have more red in my engine bay. bummer.
#9
Whats up with RDX owners?
iTrader: (9)
Hye man, check your PM. Very interested in the turbo kit. Cash in hand.
#10
Banned
Join Date: Mar 2006
Location: Frederick, Maryland
Age: 41
Posts: 1,019
Likes: 0
Received 0 Likes
on
0 Posts
how come this thing aint making 400 something HP like thinjim?
#11
Instructor
Thread Starter
Join Date: Oct 2004
Location: Lake Geneva, WI
Age: 38
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
#12
Banned
Join Date: Mar 2006
Location: Frederick, Maryland
Age: 41
Posts: 1,019
Likes: 0
Received 0 Likes
on
0 Posts
oo ok i got you
#13
Do you have aftermarket sway bars? Eibach or comptech? Im interested, please email me at randeegimenez@yahoo.com. thanks.
#14
Instructor
Thread Starter
Join Date: Oct 2004
Location: Lake Geneva, WI
Age: 38
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
Do you have aftermarket sway bars? Eibach or comptech? Im interested, please email me at randeegimenez@yahoo.com. thanks.
#15
Instructor
Thread Starter
Join Date: Oct 2004
Location: Lake Geneva, WI
Age: 38
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
If anyone wants specific pics please post what you want and I will try to get them tomorrow.
#16
I Blaze Up In
Join Date: Dec 2006
Location: 07601, NJ
Age: 35
Posts: 414
Likes: 0
Received 0 Likes
on
0 Posts
Are u including everything with the 6spd tranny to do a A/T to M/T swap? Cuz ive been shopping around for a good used CL-S 6spd tranny and all other neccessary parts with low mileage to do a swap. I also cant get the money for a good 2months, do you think u will have it for that long? Cuz i will be very serious about purschasing it if you dont mind waiting until about November.
Would you also consider doing a package of the 6SPD tranny and Clutch,Flywheel and pressure plate for $2K
Would you also consider doing a package of the 6SPD tranny and Clutch,Flywheel and pressure plate for $2K
Last edited by bigmark89; 09-02-2008 at 02:23 AM.
#17
Instructor
Thread Starter
Join Date: Oct 2004
Location: Lake Geneva, WI
Age: 38
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
I have a lot of people that want the tranny so I dont want to wait 2 months.
#18
I Blaze Up In
Join Date: Dec 2006
Location: 07601, NJ
Age: 35
Posts: 414
Likes: 0
Received 0 Likes
on
0 Posts
#20
Instructor
Thread Starter
Join Date: Oct 2004
Location: Lake Geneva, WI
Age: 38
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
PMs Replied
#22
Instructor
Thread Starter
Join Date: Oct 2004
Location: Lake Geneva, WI
Age: 38
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
#23
Instructor
Thread Starter
Join Date: Oct 2004
Location: Lake Geneva, WI
Age: 38
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
Turbo kit is off the car and ready to ship. More pics of it available just post or PM your email addy.
#25
Instructor
Thread Starter
Join Date: Oct 2004
Location: Lake Geneva, WI
Age: 38
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
Steering wheel is SOLD.
TSX Retrofit Headlights are SOLD.
Coilovers are PENDING SALE.
TSX Retrofit Headlights are SOLD.
Coilovers are PENDING SALE.
#27
Blk AC
Join Date: Jul 2006
Location: Florida
Age: 38
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
will the strut bar fit a 02 tl-s?
#30
Instructor
Thread Starter
Join Date: Oct 2004
Location: Lake Geneva, WI
Age: 38
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
navtool.com
5G TLX Audio, Bluetooth, Electronics & Navigation
31
11-16-2015 08:30 PM
SinCityTLX
5G TLX Audio, Bluetooth, Electronics & Navigation
20
10-19-2015 11:23 AM
navtool.com
1G RDX Audio, Bluetooth, Electronics & Navigation
1
09-25-2015 05:15 PM
davin, fs, j32, manual, mesh, randeegimenezyahoocom, remove, sale, screen, speed, streetspin, tranny, trans, transmission, turbo