No doubt, chromium wrapping will be regarded as an important trend in the forthcoming tuning season, just around the corner. This is, of course, also known to the car wrapping experts of FolienCenter-NRW domiciled in Haan, who wrapped the Audi TT RS coupé (seen in the photo here) in a spectacular “chromium red” prototype wrap of Hexis.

The Audi becomes an absolute eyecatcher in combination with the contrast surfaces and contrast elements (of course, also realized in Hexis wrap) in matt silver, which harmonizes perfectly well with the look of the original external mirror of the TT RS in the factory-chosen matt silver, as well as the high-gloss consolidated Audi RS6 rims.

The 9x20 inches rims are covered all round with Hankook S1 Evo tires of 225/30R20. A Bilstein B16 coil-over suspension is responsible for the opulent lowering.

Yet the TT doesn’t only look shrill, it also commands an indomitable powerhouse beneath the engine hood: thanks to the modified LOBA motorsports components (LO500P turbo charger, charge air inter-cooler, fuel pump) and the better high-performance ignition plugs and a final software optimization by FTS Fahrzeugtechnik, the five-cylinder TFSI engine extracts precisely 501 Horse Power from its 2.5 liter cubic capacity and maltreats the Sachs-Performance clutch with a maximum torque of 563 Newton meters. The shattering power is accompanied by the deep sound of the Milltek exhaust system following up on the HJS racing catalytic converters. With a sprint capacity from 0 to 100 km/h in just 3.6 seconds, and top speed in excess of 320 km/h, the “red lightning” already now, belongs to the “very fast” category in town. In spite of all that, the power doesn’t seem to be yet sufficient: an even stronger expansion stage of the TFSI drive mechanism is already in the offing. This is expected to generate more than 700 Horse Power – absolute madness!

FolienCenter-NRW GmbH specializes in complete vehicle wrapping, partial wrapping, individual high-grade finishing of wraps and paint protection wrapping. The experts exclusively use high-grade materials from PWF by Bruxafol, Hexis, 3M, Arlon, Avery or Orafol.